Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics VIPER50A(022Y) is a 5-terminal switching regulator with max output current of 2.7A and max switching frequency of 200kHz. Ideal for applications requiring pulse width modulation control technique, such as power supplies in various electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
ACDS - Activité Composants Distribution Service
Goldney Electronics S.L.
IDEA Electronic Components Group
$17.131
$15.418
AZTECH Wire
$21.520
MKK Technologies
$32.214
DigiPath Technology Company
Microchip USA
Corphita
Parana Technologies
$20.483
The use of plastic/epoxy as the package body material makes the product lightweight and durable, ideal for portable or rugged applications.
The rectangular package shape allows for easy mounting and integration into various electronic circuits and designs.
Having 5 terminals provides flexibility in connecting the regulator to other components in the circuit, allowing for customization and versatility.
The flange mount package style makes installation and mounting of the regulator convenient and secure, ensuring stability in the application.
Current-mode control provides precise regulation and stability, leading to efficient power conversion and better performance of the regulator.
The zig-zag terminal position helps in efficient routing of connections, reducing signal interference and improving overall circuit layout.
Being a switching regulator IC ensures high efficiency, fast response times, and low power dissipation, making it an energy-efficient choice for various applications.
With a nominal input voltage of 13 V, the regulator is suitable for applications requiring stable and regulated power within this voltage range.
The high maximum switching frequency of 200 kHz allows for fast and efficient power conversion, reducing ripple and improving transient response in the output.
A maximum output current of 2.7 A provides sufficient power delivery capability for driving various loads in the circuit, making it a versatile choice for different applications.
Using MOS technology ensures high switching speeds, low on-resistance, and excellent thermal performance, making the regulator efficient and reliable in operation.
The through-hole terminal form allows for easy soldering and secure connections, ensuring reliable operation and robust mechanical strength in the circuit.
Pulse width modulation control provides precise regulation of the output voltage, enabling efficient power conversion, reduced noise, and improved efficiency in the regulator.
Having a single switcher configuration simplifies the design, reduces component count, and improves reliability, making the regulator a cost-effective and easy-to-use solution.
With a terminal pitch of 2.54 mm, the regulator is compatible with standard breadboards and PCB layouts, allowing for easy prototyping and integration into electronic projects.
The minimum input voltage of 9 V ensures operation within a wide input voltage range, making the regulator versatile and suitable for various power supply applications.
The maximum input voltage of 15 V provides protection against overvoltage conditions, ensuring the safety and reliability of the regulator in demanding applications.
Switching Regulators & Controllers VIPER50A(022Y) attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
VIPER50A(022Y) Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
LT1933ES6#TRMPBF
Analog Devices
Analog Devices' LT1933ES6#TRMPBF is a small outline, low profile switching regulator with 1.05A output current and 600kHz max switching frequency. Ideal for applications requiring efficient power conversion in compact spaces, such as portable electronics or IoT devices. Operating temperature range from 0 to 70°C ensures reliable performance in various environments.
TPS61070DDCRG4
TPS61070DDCRG4 by Texas Instruments is a voltage-mode boost switching regulator with a max output current of 0.7A and a max switching frequency of 1440kHz. It operates in industrial temperature grade range (-40 to 85°C) and is ideal for battery charge controller applications due to its small outline, very thin profile package style.
LM5118MH/NOPB
National Semiconductor
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
L5972D013TR
STMicroelectronics
STMicroelectronics L5972D013TR is a MOS switching regulator with 3A output current, 280kHz max switching frequency, and voltage-mode control. Ideal for automotive applications, it operates b/w -40 to 125°C with input voltage range of 4.4-36V in a small outline package.
LM2672M-5.0/NOPB
LM2672M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 5V nominal output voltage, and 400kHz max switching frequency. It is ideal for automotive applications due to its small outline package style and wide operating temperature range (-40°C to 125°C).
TPS61170DRVTG4
TPS61170DRVTG4 by Texas Instruments is a switching regulator with a max output current of 1.44A and max output voltage of 38V, ideal for industrial applications. Operating b/w -40 to 85°C, it features pulse width modulation control technique and buck-boost switcher configuration, making it suitable for various power management needs in compact designs. With a small outline package style and surface-mount capability, this regulator offers efficient performance in limited space setups.
LM2671M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS62410DRCRG4
TPS62410DRCRG4 by Texas Instruments is a dual switching controller with a max output current of 0.8A and a max switching frequency of 2500kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring precise power regulation in compact spaces.
LM2594M-ADJ/NOPB
LM2594M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V. It operates in the automotive temperature grade range (-40 to 125°C) and is ideal for applications requiring pulse width modulation control, such as buck converter circuits.
LMZM23601V3SILT
LMZM23601V3SILT by Texas Instruments is a switching regulator with a max output current of 1A and a control mode of current-mode PWM. Operating at temperatures from -40 to 125°C, it is ideal for automotive applications due to its compact rectangular package style and buck-boost switcher configuration. With a wide input voltage range of 4-36V, this device offers precise regulation with a min output voltage of 1.2V and nominal output voltage of 3.3V.
LM5008MM
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
TPS61222DCKR
TPS61222DCKR by Texas Instruments is a switching regulator with max output current of 0.4A and max operating temp of 85°C. Ideal for battery charge control applications, it operates in boost configuration with min input voltage of 0.7V and nominal output voltage of 5V.
LM5118Q1MHX/NOPB
LTC3646EDE-1#PBF
LTC3646EDE-1#PBF by Analog Devices is a current-mode switching regulator with 14 terminals, operating b/w -40 to 85°C. It has a buck switcher configuration, supporting input voltages from 4V to 40V and output voltage of 5V. Ideal for industrial applications requiring efficient power management in compact spaces.
LM5145RGYR
LM5145RGYR by Texas Instruments is a voltage-mode switching controller with a max output voltage of 60V and max output current of 30A. With a control technique of pulse width modulation, it operates in automotive applications at temperatures ranging from -40 to 125°C. This chip carrier package with matte tin finish is ideal for buck converter configurations in various electronic systems.
TPS60403DBVR
TPS60403DBVR by Texas Instruments is a small outline, low profile switching regulator with 5 terminals. It operates at -40 to 85°C and has a max output current of 0.06A. Ideal for industrial applications requiring a switched capacitor converter with input voltage range of 1.8-5.25V.
EN6347QI
Intel
EN6347QI by Intel is a VOLTAGE-MODE SWITCHING REGULATOR with 4A output current, ideal for BUCK applications. Operating b/w -40 to 85 °C, it supports input voltage from 2.5V to 6.6V and offers a max switching frequency of 3000 kHz. With a compact design (7mm x 4mm), it's suitable for industrial use in various electronic devices.
TPS560200DBVR
TPS560200DBVR by Texas Instruments is a switching regulator with a voltage-mode control technique. It has a max output current of 0.775A and operates at a max switching frequency of 600kHz. Ideal for automotive applications due to its small outline, low profile package style, and wide operating temperature range from -40°C to 125°C.
MC34063AD
Fairchild Semiconductor
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2596S-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VIPER013HS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Additional Features: PFM CONTROL TECHNIQUE ALSO AVAILABLE;
VIPER013LSTR
VIPER013LSTR by STMicroelectronics is a current-mode switching regulator with a buck-boost switcher config. It operates b/w -40 to 125°C, with input voltage ranging from 4.5V to 30V and a max switching frequency of 132 kHz. Ideal for applications requiring efficient power management in compact spaces.
VIPER06HSTR
VIPER06HSTR by STMicroelectronics is a switching regulator with a small outline, shrink pitch package. It operates in current-mode control and has a max switching frequency of 127 kHz. This IC is commonly used in applications requiring buck switcher configuration and a nominal input voltage of 14 V.
VIPER06LSTR
VIPER06LSTR by STMicroelectronics is a current-mode switching regulator with 1 function, operating at 66 kHz. It has a buck switcher configuration and supports PWM control technique. Ideal for applications requiring compact design and efficient power management in the voltage range of 11.5V to 23.5V.
VIPER12ASTR-E
VIPER12ASTR-E by STMicroelectronics is a switching regulator with 8 terminals, operating at a max output current of 0.48A and a switching frequency of 66kHz. It features pulse width modulation control technique and is suitable for applications requiring a nominal input voltage of 18V, such as power supplies in compact electronic devices.
VIPER06XN
STMicroelectronics' VIPER06XN is a 7-terminal switching regulator with current-mode control and PWM technique. It operates b/w 11.5-23.5V, with a max frequency of 33kHz in buck configuration. Ideal for applications requiring compact design and efficient power management in various electronic devices.
VIPER06LS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G10;
VIPER06HS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
VIPER16LDTR
VIPER16LDTR by STMicroelectronics is a 16-terminal switching regulator with current-mode control and pulse width modulation. It operates at a max switching frequency of 66 kHz, suitable for buck configuration applications. The small outline package makes it ideal for compact designs in various electronic devices.
VIPER22ADIP-E
STMicroelectronics' VIPER22ADIP-E is a switching controller with 8 terminals in an inline package. It operates at a max frequency of 66 kHz and supports a max output current of 0.84 A. Ideal for applications requiring pulse width modulation control technique and single switcher configuration within input voltage range of 9-38 V.
VIPER22ASTR-E
STMicroelectronics VIPER22ASTR-E is a switching controller with 8 terminals, 66 kHz max frequency, and 0.84 A output current. Ideal for applications requiring pulse width modulation control technique in compact designs. Features small outline package style and nickel/palladium/gold terminal finish for efficient performance.
VIPER06XSTR
VIPER06XSTR by STMicroelectronics is a switching regulator with a small outline, shrink pitch package style. It operates in current-mode control and has a max switching frequency of 33 kHz. With a nominal input voltage range of 11.5 V to 23.5 V, it is suitable for various applications requiring efficient power conversion.
VIPER12ADIP-E
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Qualification: Not Qualified;
VIPER12AS-E
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: .48 A;
VIPER265KDTR
VIPER265KDTR by STMicroelectronics is a switching regulator with 16 terminals, operating temperature range of -40 to 125°C, and max output current of 0.53A. It utilizes pulse width modulation control technique in a buck switcher configuration for applications requiring efficient power conversion in compact spaces.
VIPER011XS
VIPER011XS by STMicroelectronics is a switching regulator with a max operating temperature of 125°C and a min operating temperature of -40°C. It has a small outline, shrink pitch package style and can handle input voltages ranging from 4.5V to 30V. This regulator is commonly used in applications that require pulse width modulation control and buck-boost configuration.
VIPER06XS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 33 kHz;
VIPER22ADIP
VIPER22ADIP by STMicroelectronics is a switching regulator with 8 terminals in an in-line package. It operates at a max frequency of 66 kHz and can handle up to 0.84 A output current. Ideal for applications requiring pulse width modulation control, such as power supplies and voltage converters.
VIPER267KDTR
VIPER267KDTR by STMicroelectronics is a switching regulator with 16 terminals, operating b/w -40 to 125°C. It features a max output current of 0.74A and supports pulse width modulation control technique at a frequency of up to 66kHz. Ideal for applications requiring efficient power conversion in compact spaces.
VIPER22AS-E
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved