Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VIPER06LS by STMicroelectronics is a current-mode switching regulator with 10 terminals, 66 kHz max frequency, and 14 V nominal input voltage. It is a small outline IC for buck configuration applications requiring PWM control technique and Gull Wing terminal form.
Median Price
$1.920
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.150
1k+ parts
$1.010
10k+ parts
$0.847
DigiKey
$1.145
$1.006
$0.950
Avnet
-
Nova Conductors
$0.480
Digiode
$0.808
IBS Electronics
$1.438
$1.389
$1.318
$1.523
TME
$1.530
$1.360
$1.180
$1.090
Chip Stock
Vyrian
Anansix
Micros
$0.605
Partservice
$0.816
$0.590
Micros sp.j. W. Kędra i J. Lic
$0.874
$0.632
Bristol Electronics
Continental Prestige Electronics
$0.476
$0.467
Argo Parts USA
$0.462
Corohmni
Semicontronic
$0.750
$0.731
$0.728
Ampacity Inc.
Corphita
$0.765
Microchip USA
$6.825
IDEA Electronic Components Group
$7.728
$6.955
Advanced Electronics
$10.830
$9.855
$8.881
MKK Technologies
$14.532
DigiPath Technology Company
Aztec Data Supply Inc.
$20.760
Lixinc
iodParts Technologies Inc.
A-Z Elektronik GmbH
Perfect Parts
Futuretech Components
RC Electronics
Parana Technologies
$9.240
Authorized Procurement Solutions
Kepictronics
Plastic/Epoxy material provides good insulation and protection for the internal components of the regulator, making it durable and long-lasting.
Surface mount design makes it easy to integrate the regulator onto a printed circuit board, saving space and making assembly more efficient.
Current-mode control allows for better transient response, improved stability, and enhanced load regulation in the switching regulator.
Low seated height makes this regulator suitable for applications where space is limited and height constraints are a concern.
High switching frequency enables efficient power conversion, reducing ripple and improving overall performance of the regulator.
Wide input voltage range allows for flexibility in power supply options and compatibility with a variety of voltage sources.
Switching Regulators & Controllers VIPER06LS attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
VIPER06LS Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - VIPER06 DataSheet Update 1/Mar/2017
PCN Assembly/Origin - Viperyyy 22/Mar/2021
PCN Packaging - Cover Tape 07/Sep/2019 Material Barrier Bag 17/Dec/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
4554
Jw Miller Magnetics
Other Semiconductors;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Fairchild Semiconductor
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TPS5430DDAG4
TPS5430DDAG4 by Texas Instruments is a switching regulator with 3A output current, 1.23V min output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and VOLTAGE-MODE control mode. Package style: SOIC-8, suitable for surface mount assembly.
LT1054CS8#PBF
Analog Devices
LT1054CS8#PBF by Analog Devices is a Switched Capacitor Regulator with -5V output voltage, 3.5-15V input range, and 40kHz max switching frequency. Ideal for commercial applications requiring small outline, dual terminal position, and surface mount package style in plastic/epoxy material.
LMR54410DBVR
LMR54410DBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It supports input voltages from 4-36V and outputs up to 1A at 28V. With a compact design and pulse frequency modulation control, it's ideal for applications requiring efficient power conversion in limited space.
TPS62130RGTT
TPS62130RGTT by Texas Instruments is a switching regulator with a 12V nominal input voltage and 3A max output current. It operates in voltage-mode control with a max switching frequency of 2500 kHz, making it suitable for industrial applications requiring efficient power conversion. The chip carrier package style with very thin profile and no-lead terminal form enhances space-saving design possibilities.
LT8609SEV#PBF
LT8609SEV#PBF by Analog Devices is a 16-terminal switching regulator with current-mode control, operating b/w -40 to 125°C. With a max output current of 5.7A and PWM control technique, it's ideal for automotive applications requiring a buck switcher with a wide input voltage range of 2.7-42V and high switching frequency up to 2200 kHz.
LT8641EUDC#TRPBF
Analog Devices' LT8641EUDC#TRPBF is a current-mode switching regulator with 18 terminals, operating at -40 to 125°C. It offers a max output current of 9.9A, supports PWM control technique, and has a BUCK switcher configuration. Ideal for applications requiring high efficiency power conversion in compact spaces.
TPS560430XDBVR
TPS560430XDBVR by Texas Instruments is a switching regulator with a max output current of 0.6A and a max output voltage of 24V. It operates in buck configuration, supports pulse frequency modulation control technique, and has a small outline package style suitable for automotive applications.
TPS560430X3FDBVT
TPS560430X3FDBVT by Texas Instruments is a switching regulator with 0.6A output current, 1V min output voltage, and 2100kHz max switching frequency. Ideal for automotive applications due to its low profile design and wide operating temperature range from -40°C to 125°C.
AP62200WU-7
Diodes Incorporated
AP62200WU-7 by Diodes Inc. is a switching regulator with 2A output current, 7V max output voltage, and 750kHz max switching frequency. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline package style and wide input voltage range of 4.2V to 18V.
TPS82130SILR
TPS82130SILR by Texas Instruments is a voltage-mode switching regulator with 3A output current, operating b/w -40 to 125°C. It features a buck-boost switcher configuration, PWM control technique, and supports input voltages from 3V to 17V. Ideal for automotive applications due to its compact size and high efficiency at a max frequency of 2200kHz.
TPS63900DSKT
TPS63900DSKT by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 85°C, and output voltage range from 1.8V to 5V. It is ideal for industrial applications requiring a compact design and low supply current of 0.00001mA. The device utilizes pulse width modulation control technique in a buck-boost configuration for efficient power management.
TPS62110RSAR
TPS62110RSAR by Texas Instruments is a 16-terminal switching regulator with a voltage-mode control technique. It operates b/w -40 to 85°C, offering an output range of 1.2V to 16V at a max current of 1.5A. Ideal for industrial applications requiring efficient buck conversion up to 1100kHz frequency in a compact chip carrier package.
LTC3646EDE#PBF
LTC3646EDE#PBF by Analog Devices is a current-mode switching regulator with a buck configuration. It operates in an industrial temperature range from -40°C to 85°C, suitable for various applications. With a max input voltage of 40V and nominal output voltage of 5V, it offers efficient power management in compact designs.
TPS61170DRVT
TPS61170DRVT by Texas Instruments is a switching regulator with a max output current of 1.44A and max output voltage of 38V. It operates in a temperature range from -40 to 85°C, making it suitable for industrial applications requiring precise current-mode control. With a compact square package style and pulse width modulation technique, it is ideal for space-constrained designs needing efficient power conversion.
LM22672MRE-ADJ/NOPB
LM22672MRE-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max output voltage of 37V. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications requiring efficient power management. With a compact package style and low profile design, this IC offers precise control through pulse width modulation technique at a high switching frequency of up to 1000 kHz.
LM2596SX-ADJ
LM2596SX-ADJ by Texas Instruments is a switching regulator with 5 terminals, offering a max output current of 3A and a wide input voltage range from 4.5V to 40V. Operating in voltage-mode control, it provides an adjustable output voltage ranging from 1.235V to 37V, making it suitable for automotive applications due to its high temperature grade of up to 125°C.
TPS63900DSKR
TPS63900DSKR by Texas Instruments is a small outline switching regulator with a max output current of 0.4A and a wide input voltage range from 1.8V to 5.5V, suitable for automotive applications. It operates at temperatures ranging from -40°C to 125°C, making it ideal for various electronic devices requiring efficient power management in harsh environments. With a compact package style and pulse width modulation control technique, this device offers high performance in a space-constrained design.
XTPS62933DRLR
XTPS62933DRLR by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 150°C. It offers a max output current of 3A, control via pulse width modulation, and supports buck configuration. Ideal for automotive applications due to its small size (2.1mm x 1.2mm) and high switching frequency of 2200kHz.
TPS62160DGKR
TPS62160DGKR by Texas Instruments is a switching regulator with a 1A output current and 2250 kHz max switching frequency. It operates b/w -40 to 85°C, suitable for industrial applications. With a compact design of 3x3mm, it supports input voltages from 3V to 17V, making it ideal for various power supply designs.
LM2675M-5.0
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VIPER013HS
STMicroelectronics
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Additional Features: PFM CONTROL TECHNIQUE ALSO AVAILABLE;
VIPER013LSTR
VIPER013LSTR by STMicroelectronics is a current-mode switching regulator with a buck-boost switcher config. It operates b/w -40 to 125°C, with input voltage ranging from 4.5V to 30V and a max switching frequency of 132 kHz. Ideal for applications requiring efficient power management in compact spaces.
VIPER06HSTR
VIPER06HSTR by STMicroelectronics is a switching regulator with a small outline, shrink pitch package. It operates in current-mode control and has a max switching frequency of 127 kHz. This IC is commonly used in applications requiring buck switcher configuration and a nominal input voltage of 14 V.
VIPER06LSTR
VIPER06LSTR by STMicroelectronics is a current-mode switching regulator with 1 function, operating at 66 kHz. It has a buck switcher configuration and supports PWM control technique. Ideal for applications requiring compact design and efficient power management in the voltage range of 11.5V to 23.5V.
VIPER12ASTR-E
VIPER12ASTR-E by STMicroelectronics is a switching regulator with 8 terminals, operating at a max output current of 0.48A and a switching frequency of 66kHz. It features pulse width modulation control technique and is suitable for applications requiring a nominal input voltage of 18V, such as power supplies in compact electronic devices.
VIPER06XN
STMicroelectronics' VIPER06XN is a 7-terminal switching regulator with current-mode control and PWM technique. It operates b/w 11.5-23.5V, with a max frequency of 33kHz in buck configuration. Ideal for applications requiring compact design and efficient power management in various electronic devices.
VIPER06HS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
VIPER16LDTR
VIPER16LDTR by STMicroelectronics is a 16-terminal switching regulator with current-mode control and pulse width modulation. It operates at a max switching frequency of 66 kHz, suitable for buck configuration applications. The small outline package makes it ideal for compact designs in various electronic devices.
VIPER22ADIP-E
STMicroelectronics' VIPER22ADIP-E is a switching controller with 8 terminals in an inline package. It operates at a max frequency of 66 kHz and supports a max output current of 0.84 A. Ideal for applications requiring pulse width modulation control technique and single switcher configuration within input voltage range of 9-38 V.
VIPER22ASTR-E
STMicroelectronics VIPER22ASTR-E is a switching controller with 8 terminals, 66 kHz max frequency, and 0.84 A output current. Ideal for applications requiring pulse width modulation control technique in compact designs. Features small outline package style and nickel/palladium/gold terminal finish for efficient performance.
VIPER06XSTR
VIPER06XSTR by STMicroelectronics is a switching regulator with a small outline, shrink pitch package style. It operates in current-mode control and has a max switching frequency of 33 kHz. With a nominal input voltage range of 11.5 V to 23.5 V, it is suitable for various applications requiring efficient power conversion.
VIPER12ADIP-E
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Qualification: Not Qualified;
VIPER12AS-E
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: .48 A;
VIPER265KDTR
VIPER265KDTR by STMicroelectronics is a switching regulator with 16 terminals, operating temperature range of -40 to 125°C, and max output current of 0.53A. It utilizes pulse width modulation control technique in a buck switcher configuration for applications requiring efficient power conversion in compact spaces.
VIPER011XS
VIPER011XS by STMicroelectronics is a switching regulator with a max operating temperature of 125°C and a min operating temperature of -40°C. It has a small outline, shrink pitch package style and can handle input voltages ranging from 4.5V to 30V. This regulator is commonly used in applications that require pulse width modulation control and buck-boost configuration.
VIPER06XS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 33 kHz;
VIPER22ADIP
VIPER22ADIP by STMicroelectronics is a switching regulator with 8 terminals in an in-line package. It operates at a max frequency of 66 kHz and can handle up to 0.84 A output current. Ideal for applications requiring pulse width modulation control, such as power supplies and voltage converters.
VIPER267KDTR
VIPER267KDTR by STMicroelectronics is a switching regulator with 16 terminals, operating b/w -40 to 125°C. It features a max output current of 0.74A and supports pulse width modulation control technique at a frequency of up to 66kHz. Ideal for applications requiring efficient power conversion in compact spaces.
VIPER22AS-E
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved