Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VIPER267KDTR by STMicroelectronics is a switching regulator with 16 terminals, operating b/w -40 to 125°C. It features a max output current of 0.74A and supports pulse width modulation control technique at a frequency of up to 66kHz. Ideal for applications requiring efficient power conversion in compact spaces.
Median Price
$1.570
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.481
100+ parts
$1.179
1k+ parts
$0.924
10k+ parts
-
Farnell
$1.490
$1.100
$0.765
$0.732
Arrow
$1.650
$0.988
$0.816
$0.777
DigiKey
$1.850
$1.103
$0.997
Mouser Electronics
$1.110
$1.000
Verical
$0.967
$0.830
$0.805
Future Electronics
$0.715
Element14
$2.370
$1.620
$1.520
Nova Conductors
$1.334
Digiode
$1.407
Maritex
$1.597
$0.936
$0.774
Chip Stock
IBS Electronics
$0.933
RLX Solution Inc.
TME
$1.050
Vyrian
Anansix
Semicontronic
$0.730
$0.712
$0.708
Ampacity Inc.
Continental Prestige Electronics
$1.238
$1.213
Argo Parts USA
Advanced Electronics
$1.306
Corphita
$1.333
Netroflash
Microchip USA
$7.569
Aztec Data Supply Inc.
$10.760
IDEA Electronic Components Group
$17.542
$15.787
Corohmni
$18.354
MKK Technologies
$32.986
DigiPath Technology Company
iodParts Technologies Inc.
RC Electronics
Lixinc
Infinite Electronics LLP (Excess)
Futuretech Components
Authorized Procurement Solutions
Parana Technologies
$20.974
Perfect Parts
GreenTree Electronics
This material provides durability and good insulation, making the product reliable and safe to use.
Enables easy and efficient installation on a circuit board, saving space and simplifying assembly.
Allows for operation in a wide range of environments without risk of overheating or malfunction.
Provides precise control over the output current, ensuring stable performance and efficient power conversion.
Suitable for a range of applications that require a consistent input voltage, offering flexibility in design.
Capable of delivering a substantial amount of current to power connected devices or components.
Efficiently steps down the input voltage to provide a stable output voltage, ideal for powering sensitive electronics.
Switching Regulators & Controllers VIPER267KDTR attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Current (Isup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
VIPER267KDTR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev 11/Nov/2022
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Hitano Enterprise
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
LTC3646EDE#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5022MME/NOPB
LM5022MME/NOPB by Texas Instruments is a switching controller with a current-mode control mode, operating b/w -40 to 125°C. It offers a max output voltage of 300V and supports pulse width modulation as the control technique. Ideal for automotive applications due to its small outline package style and wide input voltage range from 6-60V.
LM2678SX-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: SINGLE;
TPS62410DRCR
TPS62410DRCR by Texas Instruments is a dual switching controller with a max output current of 0.8A and a max switching frequency of 2500kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring precise power regulation in compact spaces.
MC33063AD
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2676S-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS552882QRPMRQ1
TPS552882QRPMRQ1 by Texas Instruments is a switching regulator with a 12V nominal input voltage and a max output current of 6.35A. It is commonly used in automotive applications due to its AEC-Q100 screening level and temperature grade.
TPS54040ADGQR
TPS54040ADGQR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 42V, suitable for automotive applications. It operates in current-mode control with a min output voltage of 0.8V and supports pulse width modulation as the control technique, making it ideal for compact designs requiring efficient power management at temperatures ranging from -40 to 125°C.
LM5002MAX/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2576T-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS5450DDA
TPS5450DDA by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 5A. It is ideal for automotive applications due to its voltage-mode control technique, buck switcher configuration, and wide input voltage range of 5.5V to 36V.
LM2776DBVR
LM2776DBVR by Texas Instruments is a small outline, low profile switching regulator with a max output current of 0.2A and a max switching frequency of 2300kHz. It operates in industrial temperature grade range (-40 to 85°C) and is ideal for applications requiring an input voltage b/w 2.7V to 5.5V, such as switched capacitor converters.
PLMR36520ADDAR
Texas Instruments PLMR36520ADDAR is a switching regulator with 2A output current, 400kHz switching frequency, and -40 to 125°C operating temperature range. Ideal for automotive applications due to its small outline package style and pulse frequency modulation control technique.
LMR51420YFDDCR
LMR51420YFDDCR by Texas Instruments is a current-mode switching regulator with max output voltage of 34.2V and max output current of 2A. Ideal for applications requiring pulse width modulation control technique, such as small outline, thin profile designs in automotive electronics.
LM2596SX-5.0/NOPB
LM2596SX-5.0/NOPB by Texas Instruments is a 5-terminal switching regulator with VOLTAGE-MODE control, operating b/w -40 to 125 °C. It offers a max output voltage of 37 V and current of 3 A, suitable for automotive applications due to its compact size (10.16mm x 8.64mm) and high efficiency (173 kHz).
AP64501SP-13
AP64501SP-13 by Diodes Inc. is a switching regulator with max output voltage of 40V, min input voltage of 3.8V, and max operating temp of 85°C. Ideal for industrial applications requiring pulse frequency modulation control technique in a small outline package style.
LM46001PWPT
LM46001PWPT by Texas Instruments is a switching regulator with 1A output current, 28V max output voltage, and 2200kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
MC33063ADR2G
LM3481MMX/NOPB
LM3481MMX/NOPB by Texas Instruments is a switching controller with a max output current of 1A and a max output voltage of 500V. It operates in current-mode control technique, suitable for automotive applications due to its wide temperature range. The package style is small outline with thin profile, making it ideal for space-constrained designs.
LM5085MYE/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT8315HFE#TRPBF
Analog Devices
VIPER013HS
STMicroelectronics
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Additional Features: PFM CONTROL TECHNIQUE ALSO AVAILABLE;
VIPER013LSTR
VIPER013LSTR by STMicroelectronics is a current-mode switching regulator with a buck-boost switcher config. It operates b/w -40 to 125°C, with input voltage ranging from 4.5V to 30V and a max switching frequency of 132 kHz. Ideal for applications requiring efficient power management in compact spaces.
VIPER06HSTR
VIPER06HSTR by STMicroelectronics is a switching regulator with a small outline, shrink pitch package. It operates in current-mode control and has a max switching frequency of 127 kHz. This IC is commonly used in applications requiring buck switcher configuration and a nominal input voltage of 14 V.
VIPER06LSTR
VIPER06LSTR by STMicroelectronics is a current-mode switching regulator with 1 function, operating at 66 kHz. It has a buck switcher configuration and supports PWM control technique. Ideal for applications requiring compact design and efficient power management in the voltage range of 11.5V to 23.5V.
VIPER12ASTR-E
VIPER12ASTR-E by STMicroelectronics is a switching regulator with 8 terminals, operating at a max output current of 0.48A and a switching frequency of 66kHz. It features pulse width modulation control technique and is suitable for applications requiring a nominal input voltage of 18V, such as power supplies in compact electronic devices.
VIPER06XN
STMicroelectronics' VIPER06XN is a 7-terminal switching regulator with current-mode control and PWM technique. It operates b/w 11.5-23.5V, with a max frequency of 33kHz in buck configuration. Ideal for applications requiring compact design and efficient power management in various electronic devices.
VIPER06LS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G10;
VIPER06HS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
VIPER16LDTR
VIPER16LDTR by STMicroelectronics is a 16-terminal switching regulator with current-mode control and pulse width modulation. It operates at a max switching frequency of 66 kHz, suitable for buck configuration applications. The small outline package makes it ideal for compact designs in various electronic devices.
VIPER22ADIP-E
STMicroelectronics' VIPER22ADIP-E is a switching controller with 8 terminals in an inline package. It operates at a max frequency of 66 kHz and supports a max output current of 0.84 A. Ideal for applications requiring pulse width modulation control technique and single switcher configuration within input voltage range of 9-38 V.
VIPER22ASTR-E
STMicroelectronics VIPER22ASTR-E is a switching controller with 8 terminals, 66 kHz max frequency, and 0.84 A output current. Ideal for applications requiring pulse width modulation control technique in compact designs. Features small outline package style and nickel/palladium/gold terminal finish for efficient performance.
VIPER06XSTR
VIPER06XSTR by STMicroelectronics is a switching regulator with a small outline, shrink pitch package style. It operates in current-mode control and has a max switching frequency of 33 kHz. With a nominal input voltage range of 11.5 V to 23.5 V, it is suitable for various applications requiring efficient power conversion.
VIPER12ADIP-E
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Qualification: Not Qualified;
VIPER12AS-E
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: .48 A;
VIPER265KDTR
VIPER265KDTR by STMicroelectronics is a switching regulator with 16 terminals, operating temperature range of -40 to 125°C, and max output current of 0.53A. It utilizes pulse width modulation control technique in a buck switcher configuration for applications requiring efficient power conversion in compact spaces.
VIPER011XS
VIPER011XS by STMicroelectronics is a switching regulator with a max operating temperature of 125°C and a min operating temperature of -40°C. It has a small outline, shrink pitch package style and can handle input voltages ranging from 4.5V to 30V. This regulator is commonly used in applications that require pulse width modulation control and buck-boost configuration.
VIPER06XS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 33 kHz;
VIPER22ADIP
VIPER22ADIP by STMicroelectronics is a switching regulator with 8 terminals in an in-line package. It operates at a max frequency of 66 kHz and can handle up to 0.84 A output current. Ideal for applications requiring pulse width modulation control, such as power supplies and voltage converters.
VIPER22AS-E
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved