Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$1.952
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$1.404
100+ parts
$1.160
1k+ parts
$0.627
10k+ parts
-
Newark
$2.500
$1.520
$1.370
$1.320
Mouser Electronics
$2.570
$1.550
$1.390
$1.280
Arrow
$1.242
Nova Conductors
$0.964
Digiode
$1.334
TME
$2.460
$1.530
$1.460
Vyrian
Chip Stock
Anansix
Cyclops Electronics Ltd
ComSIT Distribution GmbH
ComSIT USA
Avant Electronics Limited
Semicontronic
$0.690
$0.673
$0.669
Ampacity Inc.
Continental Prestige Electronics
$0.944
Argo Parts USA
Bastille Electronics
$0.916
$0.870
$0.858
Corphita
$1.264
Component Stockers USA
$1.830
Parana Technologies
$9.101
$9.754
DigiPath Technology Company
$10.021
$9.220
ChromeModa Solutions
$10.226
$8.385
IDEA Electronic Components Group
$9.715
$9.203
Modulus Dynamics
$11.257
Corohmni
$20.726
Advanced Electronics
$25.736
$24.449
Perfect Parts
iodParts Technologies Inc.
Lixinc
Authorized Procurement Solutions
Kepictronics
Futuretech Components
Lucentia Tech
$5.021
Robosynatics
$1.082
Switching Regulators & Controllers LM3578AMX/NOPB attributes and parameters. Explore more Switching Regulators & Controllers devices from National Semiconductor
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LM3578AMX/NOPB Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Cu Wire 17/Jun/2016 Mold Compound 24/Mar/2016
PCN Assembly/Origin - Mult Devices 21/Aug/2017
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NXP Semiconductors
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1554216002
Molex
WIRE AND CABLE;
LM51561QDSSRQ1
Texas Instruments' LM51561QDSSRQ1 is an AEC-Q100 rated switching controller with a 12V nominal input voltage. It operates in automotive applications, offering a max output voltage of 300V and a control mode of current-mode PWM. With a compact rectangular package and dual terminal position, it supports a wide temperature range from -40°C to 150°C.
LM2576HVS-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2672M-12/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS23753APWR
TPS23753APWR by Texas Instruments is a switching controller with a 48V nominal input voltage and 273 kHz max switching frequency. It operates in automotive-grade temperatures from -40 to 125 °C, making it suitable for various power management applications. With a small outline and thin profile package style, it offers efficient current-mode control using pulse width modulation technique.
LM2678S-3.3/NOPB
LM2678S-3.3/NOPB by Texas Instruments is a switching regulator with a max output current of 5A, operating temp range of -40 to 125°C, and control mode as voltage-mode. It is ideal for automotive applications due to its compact size, PWM control technique, and wide input voltage range from 8V to 40V.
LM2842XMK-ADJL/NOPB
LM2842XMK-ADJL/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a control mode of current-mode PWM. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various applications such as power management in automotive electronics.
LM2674M-ADJ/NOPB
LM2674M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with max output of 37V, 0.5A current, and 260kHz frequency. Ideal for automotive applications due to its DMOS technology, it operates b/w -40°C to 125°C range and supports input voltages from 6.5V to 40V.
LM2596T-5.0/NOPB
LM2596T-5.0/NOPB by Texas Instruments is a 3A BUCK switching regulator with an input voltage range of 4.5V to 40V and output voltage of 5V. It operates in voltage-mode control with a max frequency of 173kHz, making it suitable for automotive applications due to its temperature grade up to 125°C.
LM2594MX-3.3/NOPB
LM2594MX-3.3/NOPB by Texas Instruments is a voltage-mode switching regulator with a 3.3V output, suitable for automotive applications. It operates b/w -40 to 125°C, handles up to 0.5A output current, and supports input voltages from 4.5V to 40V. This small outline IC uses pulse width modulation control technique at a max frequency of 173kHz for efficient buck conversion.
171032401
Wuerth Elektronik & Kg
171032401 by Wurth Elektronik is a BUCK switching regulator with a nominal input voltage of 24V and nominal output voltage of 12V. It operates in automotive-grade temperatures (-40 to 125°C) with a max switching frequency of 800 kHz. This MICROELECTRONIC ASSEMBLY is surface mountable and suitable for various applications requiring efficient power regulation.
TPS62903RPJR
TPS62903RPJR by Texas Instruments is a switching regulator with 3A output current, 1.2V nominal output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact chip carrier package style. Suitable for various power management needs in automotive electronics systems.
LM22680MRX-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 600 kHz;
MC34063ADRJRG4
MC34063ADRJRG4 by Texas Instruments is a switching regulator with 1.5A max output current and 100kHz max switching frequency. It is commonly used in applications requiring voltage-mode control, such as buck-boost configurations for power supply systems.
MAX17502FATB+T
Analog Devices
Analog Devices' MAX17502FATB+T is a current-mode switching regulator with a max output current of 1.9A and a buck switcher configuration. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications. With a wide input voltage range of 4.5V to 60V, it is ideal for various power management needs in compact designs.
LM2671M-ADJ/NOPB
LM2671M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V. It operates in the temperature range of -40 to 125°C, making it suitable for automotive applications. This small outline package has 8 terminals and uses pulse width modulation control technique at a max switching frequency of 400kHz.
LM5575MHX/NOPB
Switching Regulator or Controllers; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: TSSOP16,.25;
LMZM23601V5SILR
LMZM23601V5SILR by Texas Instruments is a switching regulator with 1A output current, 1100kHz max switching frequency, and 5V nominal output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact rectangular package style. Suitable for various power management needs in automotive electronics.
TPS63001DRCRG4
TPS63001DRCRG4 by Texas Instruments is a switching regulator with a max output current of 2A and max operating temp of 85°C. Ideal for industrial applications, it operates in buck-boost configuration with a control mode of current-mode PWM. With a small outline package style, it offers a min output voltage of 3.3V.
LM5017SD/NOPB
LM5017SD/NOPB by Texas Instruments is a switching regulator with a max output voltage of 90V and max output current of 0.6A. Ideal for automotive applications, it operates b/w -40 to 125°C, with a switching frequency up to 1MHz.
LM25011MYX/NOPB
LM25011MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and dual terminal position, it offers high efficiency at up to 2000 kHz switching frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM3578AMX/NOPB
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM3578AN/NOPB
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM3578AM/NOPB
LM3578AM/NOPB by Texas Instruments is a small outline switching regulator with 8 terminals. It operates b/w 0-125°C, with a min input voltage of 2V and max of 40V. This current-mode control PWM technology supports buck-boost configuration at a max frequency of 100kHz, making it ideal for various power management applications.
LM3524DM/NOPB
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM3578AMX
LM3578AMX by Texas Instruments is a switching regulator with 8 terminals, operating b/w 0-125°C. It has a min output voltage of 1V and supports current-mode control. Ideal for applications requiring a compact design and efficient power management up to 40V input voltage and 0.75A output current at a max frequency of 100kHz.
LM3524DMX/NOPB
LM3578AM
LM3561TMX/NOPB
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: FBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
LM3561TME/NOPB
LM3524DN
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM3578AMDC
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; Package Code: DIE; Package Shape: UNSPECIFIED; Surface Mount: YES; Maximum Operating Temperature: 70 Cel;
LM3524DN/NOPB
LM3524DM
LM3578AN
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved