Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VIPER35HE by STMicroelectronics is a versatile switching controller with a max output current of 1.05 A and operates at a nominal voltage of 14 V. It features a compact design with a max temp of 125 °C and supports pulse width modulation for efficient power management. Ideal for various applications, it ensures reliable performance in demanding environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
AZTECH Wire
$7.270
$6.980
$6.840
$6.710
IDEA Electronic Components Group
$12.055
$10.849
Microchip USA
$17.635
Advanced Electronics
$19.695
$17.922
$16.150
MKK Technologies
$22.668
DigiPath Technology Company
Corphita
Parana Technologies
$14.413
The robust plastic/epoxy body ensures durability and resistance to environmental factors, making this switching regulator ideal for various applications.
The rectangular shape allows for efficient PCB layout, contributing to space-saving designs in compact electronic devices.
A nominal supply voltage of 14 V makes it suitable for a wide range of applications, ensuring compatibility with typical power supplies.
The 10 terminals provide flexibility for multiple connections and configurations, enhancing versatility in circuit design.
The in-line package style with shrink pitch facilitates easy integration into space-constrained environments.
With a maximum operating temperature of 125 °C, this regulator can perform reliably in high-temperature environments.
Current-mode control improves response times and stability, providing better performance in dynamic load conditions.
An operational range down to -40 °C ensures reliability in harsh environments, suitable for automotive and industrial applications.
Dual terminal positions allow for better handling during assembly and improved circuit flexibility.
The compact seated height allows for low-profile designs, making this component perfect for portable electronic devices.
A width of 7.62 mm makes it suitable for high-density PCB layouts without compromising performance.
Being a switching controller enhances efficiency and reduces heat compared to linear regulators, making it a smart choice for power management.
The length of 9.59 mm contributes to a compact design, allowing integration in various electronic applications.
The ability to switch at 250 kHz enables smaller output capacitors and inductors, improving overall circuit efficiency.
A low supply current of 3 mA minimizes power consumption, making it suitable for battery-operated devices.
With a maximum output current of 1.05 A, this regulator is capable of driving various loads effectively.
Through-hole terminal form provides strong mechanical attachment and ease of soldering, enhancing reliability in assembly.
Using pulse width modulation allows for precise control of output voltage, improving efficiency and performance in power conversion.
A terminal pitch of 1.77 mm ensures compatibility with a wide range of PCB layouts and simplifies the manufacturing process.
Switching Regulators & Controllers VIPER35HE attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Additional Features:
Other IC type:
Control Mode:
Control Technique:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switching Frequency:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
VIPER35HE Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev Moulding Chg 28/Jan/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Eic Semiconductor
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
TPS61170DRVT
TPS61170DRVT by Texas Instruments is a switching regulator with a max output current of 1.44A and max output voltage of 38V. It operates in a temperature range from -40 to 85°C, making it suitable for industrial applications requiring precise current-mode control. With a compact square package style and pulse width modulation technique, it is ideal for space-constrained designs needing efficient power conversion.
UCC28070PWR
UCC28070PWR by Texas Instruments is a current-mode power factor controller with a boost switcher configuration. It operates at a max switching frequency of 300 kHz and has a max output current of 0.75 A. Ideal for automotive applications due to its wide temperature range and small outline package style.
UCC25600DRG4
UCC25600DRG4 by Texas Instruments is a voltage-mode switching controller with BICMOS technology. It operates in automotive-grade temperatures (-40 to 125°C) and supports input voltages from 11V to 18V. With a max switching frequency of 400 kHz, it's ideal for applications requiring resonant control in compact designs.
LMZ14202HTZE/NOPB
LMZ14202HTZE/NOPB by Texas Instruments is a switching regulator with 2A output current, 5-24V output voltage range, and VOLTAGE-MODE control mode. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Features include small outline package, single terminal position, and buck-boost switcher configuration.
LM25011MY/NOPB
LM25011MY/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage, 2A max output current, and 2000 kHz max switching frequency. It is ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
TPS63031DSKR
TPS63031DSKR by Texas Instruments is a switching regulator with a max output current of 0.4A and a max operating temperature of 125°C. It operates in buck-boost configuration, suitable for automotive applications due to its wide input voltage range from 1.8V to 5.5V. With a compact package style and high switching frequency of 2600kHz, it is ideal for space-constrained designs requiring efficient power management.
LM2672M-12/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2594M-3.3/NOPB
LM2594M-3.3/NOPB by Texas Instruments is a voltage-mode switching regulator with a min output voltage of 3.3V and max output current of 0.5A, suitable for automotive applications. It operates b/w -40°C to 125°C, has a max input voltage of 40V, and utilizes pulse width modulation control technique at a max switching frequency of 173kHz.
LM5118MH/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR54410FDBVR
LMR54410FDBVR by Texas Instruments is a switching regulator with a 1A output current and 1100 kHz max switching frequency. It operates b/w -40 to 125°C, suitable for various applications requiring a compact design and efficient power management in the voltage range of 4-36V.
TPS54260DGQR
TPS54260DGQR by Texas Instruments is a switching regulator with a max output current of 2.5A and a max output voltage of 58V, suitable for automotive applications. It operates in pulse width modulation control mode, with a min operating temperature of -40°C and a max operating temperature of 125°C. The package style is small outline, heat sink/slug, thin profile, shrink pitch, making it ideal for space-constrained designs.
MC34063ADG
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT8641EUDC#TRPBF
Analog Devices
Analog Devices' LT8641EUDC#TRPBF is a current-mode switching regulator with 18 terminals, operating at -40 to 125°C. It offers a max output current of 9.9A, supports PWM control technique, and has a BUCK switcher configuration. Ideal for applications requiring high efficiency power conversion in compact spaces.
LM5164QDDARQ1
LM5164QDDARQ1 by Texas Instruments is a switching regulator with 1A output current, 90V max output voltage, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and small outline package style.
LMZ23605TZX/NOPB
LMZ23605TZX/NOPB by Texas Instruments is a switching regulator with 5A output current, 950 kHz max frequency, and 3.3V nominal output voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and supports input voltages from 6V to 36V in a small outline package.
TPSM84209RKHT
TPSM84209RKHT by Texas Instruments is a switching regulator with 9 terminals, operating temperature range of -40 to 85°C, and output current up to 2.5A. Ideal for industrial applications requiring a compact chip carrier package with pulse width modulation control and buck-boost configuration.
LM3578AMX/NOPB
SG3525AN
Microchip Technology
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM5008ASDX/NOPB
LM5008ASDX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 75V and max output current of 0.35A. Operating in temperatures from -40 to 125°C, it's ideal for automotive applications due to its small outline package and wide input voltage range of 6-95V. With a max switching frequency of 600kHz, this device is suitable for various power management needs.
CHL8316CRT
Infineon Technologies
Switching Regulator or Controllers;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VIPER013HS
STMicroelectronics
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Additional Features: PFM CONTROL TECHNIQUE ALSO AVAILABLE;
VIPER013LSTR
VIPER013LSTR by STMicroelectronics is a current-mode switching regulator with a buck-boost switcher config. It operates b/w -40 to 125°C, with input voltage ranging from 4.5V to 30V and a max switching frequency of 132 kHz. Ideal for applications requiring efficient power management in compact spaces.
VIPER06HSTR
VIPER06HSTR by STMicroelectronics is a switching regulator with a small outline, shrink pitch package. It operates in current-mode control and has a max switching frequency of 127 kHz. This IC is commonly used in applications requiring buck switcher configuration and a nominal input voltage of 14 V.
VIPER06LSTR
VIPER06LSTR by STMicroelectronics is a current-mode switching regulator with 1 function, operating at 66 kHz. It has a buck switcher configuration and supports PWM control technique. Ideal for applications requiring compact design and efficient power management in the voltage range of 11.5V to 23.5V.
VIPER12ASTR-E
VIPER12ASTR-E by STMicroelectronics is a switching regulator with 8 terminals, operating at a max output current of 0.48A and a switching frequency of 66kHz. It features pulse width modulation control technique and is suitable for applications requiring a nominal input voltage of 18V, such as power supplies in compact electronic devices.
VIPER06XN
STMicroelectronics' VIPER06XN is a 7-terminal switching regulator with current-mode control and PWM technique. It operates b/w 11.5-23.5V, with a max frequency of 33kHz in buck configuration. Ideal for applications requiring compact design and efficient power management in various electronic devices.
VIPER06LS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G10;
VIPER06HS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
VIPER16LDTR
VIPER16LDTR by STMicroelectronics is a 16-terminal switching regulator with current-mode control and pulse width modulation. It operates at a max switching frequency of 66 kHz, suitable for buck configuration applications. The small outline package makes it ideal for compact designs in various electronic devices.
VIPER22ADIP-E
STMicroelectronics' VIPER22ADIP-E is a switching controller with 8 terminals in an inline package. It operates at a max frequency of 66 kHz and supports a max output current of 0.84 A. Ideal for applications requiring pulse width modulation control technique and single switcher configuration within input voltage range of 9-38 V.
VIPER22ASTR-E
STMicroelectronics VIPER22ASTR-E is a switching controller with 8 terminals, 66 kHz max frequency, and 0.84 A output current. Ideal for applications requiring pulse width modulation control technique in compact designs. Features small outline package style and nickel/palladium/gold terminal finish for efficient performance.
VIPER06XSTR
VIPER06XSTR by STMicroelectronics is a switching regulator with a small outline, shrink pitch package style. It operates in current-mode control and has a max switching frequency of 33 kHz. With a nominal input voltage range of 11.5 V to 23.5 V, it is suitable for various applications requiring efficient power conversion.
VIPER12ADIP-E
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Qualification: Not Qualified;
VIPER12AS-E
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: .48 A;
VIPER265KDTR
VIPER265KDTR by STMicroelectronics is a switching regulator with 16 terminals, operating temperature range of -40 to 125°C, and max output current of 0.53A. It utilizes pulse width modulation control technique in a buck switcher configuration for applications requiring efficient power conversion in compact spaces.
VIPER011XS
VIPER011XS by STMicroelectronics is a switching regulator with a max operating temperature of 125°C and a min operating temperature of -40°C. It has a small outline, shrink pitch package style and can handle input voltages ranging from 4.5V to 30V. This regulator is commonly used in applications that require pulse width modulation control and buck-boost configuration.
VIPER06XS
SWITCHING REGULATOR; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 33 kHz;
VIPER22ADIP
VIPER22ADIP by STMicroelectronics is a switching regulator with 8 terminals in an in-line package. It operates at a max frequency of 66 kHz and can handle up to 0.84 A output current. Ideal for applications requiring pulse width modulation control, such as power supplies and voltage converters.
VIPER267KDTR
VIPER267KDTR by STMicroelectronics is a switching regulator with 16 terminals, operating b/w -40 to 125°C. It features a max output current of 0.74A and supports pulse width modulation control technique at a frequency of up to 66kHz. Ideal for applications requiring efficient power conversion in compact spaces.
VIPER22AS-E
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved