Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STP11NM80 by STMicroelectronics is a N-CHANNEL Power FET with 800V DS Breakdown Voltage, ideal for SWITCHING applications. It features 44A IDM, 400mJ EAS, and 0.4 ohm RDS(on). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 205W at 150°C.
Median Price
$5.570
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Arrow
1+ parts
$3.078
100+ parts
$1.549
1k+ parts
-
10k+ parts
Chip1Stop
$4.449
$2.970
Mouser Electronics
$3.220
$3.210
Farnell
$5.920
$3.500
$2.670
Newark
$6.130
$3.780
$3.130
DigiKey
$6.870
$3.368
$2.801
Element14
$9.960
$5.890
$4.490
Verical
$2.390
$2.171
Avnet
RS (Exports)
$1.350
EBV Elektronik
DF Sales Co.
Digiode
$3.727
TME
$4.030
$2.260
IBS Electronics
$3.801
$1.795
Vyrian
Chip Stock
Cyclops Electronics Ltd
Anansix
Micros sp.j. W. Kędra i J. Lic
$2.536
$2.469
Nova Conductors
Goldney Electronics S.L.
Sunrise Surplus Inc.
IDEA Electronic Components Group
$1.530
$1.377
Ampacity Inc.
$2.280
MKK Technologies
$2.877
DigiPath Technology Company
Corphita
$3.531
Continental Prestige Electronics
$6.070
$4.130
Microchip USA
$17.780
Kepictronics
Lixinc
iodParts Technologies Inc.
Perfect Parts
RC Electronics
Authorized Procurement Solutions
Alle Elektronik GmbH
Argo Parts USA
Epart123
$4.810
$4.380
Parana Technologies
$1.829
Formix International (Excess)
Aranea Global
EMSNET (Excess)
Plastic/Epoxy package body material provides good insulation properties and high durability, making the transistor suitable for a wide range of operating conditions.
The built-in diode allows for easier circuit design and protection against reverse voltage transients, enhancing the reliability of the transistor in switching applications.
The high breakdown voltage ensures the transistor can handle high voltages without breakdown, making it suitable for high-power applications.
With a high power dissipation rating, this transistor can handle high power levels without overheating, making it ideal for applications where power dissipation is a concern.
The high maximum operating temperature allows the transistor to operate reliably in high-temperature environments, increasing its versatility in various applications.
Power Field Effect Transistors (FET) STP11NM80 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from STMicroelectronics
Additional Features:
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
STP11NM80 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Mult Dev Adv Material Notice 8/Apr/2019
PCN Assembly/Origin - Mult Dev Site Closure 13/Feb/2020
PCN Packaging - Traceability 06/Mar/2017
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
General Semiconductor
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
IRFP460LC
Vishay Intertechnology's IRFP460LC is a N-CHANNEL Power FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 80A IDM, 960mJ EAS, and 0.27 ohm RDS(on). Operating from -55 to 150 °C, it has a max power dissipation of 280W in a RECTANGULAR package with THROUGH-HOLE terminals.
IRFP460
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Maximum Drain Current (ID): 20 A; No. of Terminals: 3;
IRFR6215TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; Transistor Element Material: SILICON; Case Connection: DRAIN;
JANTX2N6796
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Transistor Application: SWITCHING; Operating Mode: ENHANCEMENT MODE;
NDT3055
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Drain-Source On Resistance: .1 ohm; Package Body Material: PLASTIC/EPOXY;
IRF9530PBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JEDEC-95 Code: TO-220AB; Transistor Application: SWITCHING; Terminal Position: SINGLE;
SQ2318AES-T1_GE3
Vishay Intertechnology's SQ2318AES-T1_GE3 is a N-CHANNEL Power FET with 40V DS Breakdown Voltage and 32A IDM. Ideal for applications requiring high current handling capabilities, such as power supplies and motor control systems. Features include 8A ID, 0.031ohm RDS(on), and 46pF Crss for efficient performance in various electronic devices.
BSZ067N06LS3GATMA1
Infineon Technologies
Infineon BSZ067N06LS3GATMA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 80A IDM, 118mJ EAS, and 0.0121 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max temp of 150°C and DUAL terminal position for efficient power management.
IRLR024NTRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Additional Features: LOGIC LEVEL COMPATIBLE, AVALANCHE RATED; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
STD12NF06LT4
STMicroelectronics
STD12NF06LT4 by STMicroelectronics is an N-channel power FET with a 60V DS breakdown voltage and 48A max pulsed drain current. It is used for switching applications, operates in enhancement mode, and has a built-in diode. The transistor features a 0.12 ohm max drain-source resistance and can handle up to 30W of power dissipation.
IRF7103TRPBF-1
Power Field-Effect Transistors;
NVMFD5C650NLWFT1G
Onsemi
NVMFD5C650NLWFT1G by Onsemi is a Power FET with 60V DS Breakdown Voltage, 502A IDM, and 0.0058 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance. Enhances performance in power management systems with its high current handling capabilities.
NDT452AP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Pulsed Drain Current (IDM): 15 A; Package Body Material: PLASTIC/EPOXY;
IXTK3N250L
Littelfuse
IXTK3N250L by Littelfuse is a N-CHANNEL FET with 2500V DS Breakdown Voltage, ideal for AMPLIFIER applications. It features 8A IDM, 417W Abs Power Dissipation, and operates in ENHANCEMENT MODE. With a max operating temperature of 150°C and -55°C min, it offers reliable performance in various environments.
SI7469ADP-T1-RE3
Vishay Intertechnology's SI7469ADP-T1-RE3 is a P-channel FET with 80V DS breakdown voltage and 125A IDM. Ideal for switching applications, it features a built-in diode, 0.027 ohm RDS(on), and operates in enhancement mode. Suitable for surface mount with 5 terminals, this MOSFET has a max power dissipation of 73.5W and can withstand temperatures from -55 to 150°C.
IRF9530
Samsung
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Qualification: Not Qualified; Transistor Application: SWITCHING;
IRF540SPBF
Vishay Intertechnology's IRF540SPBF is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 110A IDM, 230mJ EAS, and 0.077 ohm RDS(on). With a max power dissipation of 150W and operating temperature up to 175°C, it is suitable for high-power circuits requiring efficient switching capabilities.
SUD50P04-09L-E3
Vishay Intertechnology's SUD50P04-09L-E3 is a P-channel Power FET with 40V DS breakdown voltage and 100A IDM. Ideal for applications requiring high power dissipation, such as automotive systems or industrial equipment due to its 136W max power dissipation and -55 to 175°C operating temperature range.
IRF7309TRPBF
IRF7309TRPBF by Infineon is a Power FET with N-Channel and P-Channel types, suitable for switching applications. It features 2 elements with built-in diode, a max drain current of 4A, and a min DS breakdown voltage of 30V. With a package style of small outline and operating temperature up to 150°C, it's ideal for compact electronic devices requiring efficient power management.
BSC098N10NS5ATMA1
BSC098N10NS5ATMA1 by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for switching applications. Features include 240A pulsed drain current, 0.0098 ohm max on resistance, and 30mJ avalanche energy rating. Package style is small outline with 8 terminals in plastic/epoxy material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STP11NK50ZFP
STP11NK50ZFP by STMicroelectronics is a N-CHANNEL FET with 500V DS Breakdown Voltage, 40A IDM, and 0.52 ohm RDS(on). Ideal for SWITCHING applications due to its 30W power dissipation, 190mJ EAS rating, and ENHANCEMENT MODE operation at up to 150°C.
STP11NK50Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JESD-609 Code: e3;
STP10NK60ZFP
STP10NK60ZFP by STMicroelectronics is a N-CHANNEL power FET with 600V DS breakdown voltage. It is used for switching applications, offering a max pulsed drain current of 36A and an avalanche energy rating of 300mJ.
STP12NK80Z
STP12NK80Z by STMicroelectronics is a N-CHANNEL FET with 800V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 42A IDM, 400mJ EAS, and 0.75 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 190W at 150°C.
New Jersey Semiconductor Products
N-CHANNEL; Configuration: SINGLE; Transistor Element Material: SILICON; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): 10.5 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
STP15NK50ZFP
STP15NK50ZFP by STMicroelectronics is a N-CHANNEL FET with 500V DS breakdown voltage and 56A pulsed drain current. Ideal for switching applications, it operates in enhancement mode with 40W power dissipation and -50 to 150°C temperature range.
STP12NM50
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 110 W; No. of Elements: 1; Maximum Operating Temperature: 150 Cel;
STP12NM50FP
STP12NM50FP by STMicroelectronics is a N-CHANNEL FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 48A IDM, 400mJ EAS, and 0.35 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max temp of 150°C and 35W power dissipation.
STP10NK70ZFP
STP10NK70ZFP by STMicroelectronics is a N-CHANNEL power FET with 700V DS breakdown voltage. It is used for switching applications, offering a max pulsed drain current of 34A and an avalanche energy rating of 350mJ.
STP12NM50FD
STP12NM50FD by STMicroelectronics is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. It's ideal for SWITCHING applications, featuring 48A IDM and 0.4 ohm RDS(on). Operating at up to 150°C, it offers a max power dissipation of 160W in a RECTANGULAR package.
STP12NM50FDFP
STP12NM50FDFP by STMicroelectronics is a power FET with N-channel configuration and built-in diode. It has a min DS breakdown voltage of 500V, making it suitable for switching applications. With a max pulsed drain current of 48A and an avalanche energy rating of 400mJ, it offers high performance in power dissipation and temperature resistance.
STP12NM50N
STP12NM50N by STMicroelectronics is a N-CHANNEL FET with 500V DS Breakdown Voltage, 44A IDM, and 0.38 ohm RDS(on). Ideal for SWITCHING applications due to its 100W power dissipation and ENHANCEMENT MODE operation. Package style is FLANGE MOUNT with Matte Tin finish, suitable for high-temp environments up to 150°C.
STP13NK60Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 135 W; Package Style (Meter): FLANGE MOUNT; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
STP120N4F6
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 110 W; Package Shape: RECTANGULAR; Qualification: Not Qualified;
STP150N10F7AG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 250 W; Transistor Element Material: SILICON; Transistor Application: SWITCHING;
STP150N10F7
STP150N10F7 by STMicroelectronics is a power FET with N-channel configuration and built-in diode. It has a min DS breakdown voltage of 100V, max pulsed drain current of 440A, and avalanche energy rating of 495mJ. This transistor is commonly used for switching applications.
STP11NM60ND
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Form: THROUGH-HOLE;
STP16NF06L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 45 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Qualification: Not Qualified;
STP105N3LL
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 140 W; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Elements: 1;
STP15N80K5
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 190 W; Transistor Element Material: SILICON; JESD-30 Code: R-PSFM-T3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved