Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
L6926D013TR by STMicroelectronics is a compact buck switching regulator with a max output current of 1.4 A and operates at up to 600 kHz. It features a dual terminal position in a thin profile package, ideal for space-constrained applications. This CMOS device supports input voltages from 2 V to 5.5 V, making it versatile for various electronic designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
IDEA Electronic Components Group
$19.050
$17.145
MKK Technologies
$35.823
DigiPath Technology Company
Authorized Procurement Solutions
Corphita
Parana Technologies
$22.778
The use of plastic/epoxy as the body material ensures durability and protects against environmental factors, making it suitable for a wide range of applications.
Surface mount technology allows for compact designs and efficient use of space on PCBs, enhancing overall production efficiency.
The square package shape helps in easy integration into circuit layouts while maintaining a small footprint.
With eight terminals, this regulator offers flexible connectivity options for various applications.
This package style accommodates dense circuit designs and allows for better thermal performance due to its thin profile.
Current-mode control enhances stability and transient response, making this regulator suitable for dynamic load conditions.
Dual terminal positioning enables versatile layout designs and simplifies PCB routing.
A low maximum seated height aids in space-saving designs, making it ideal for compact electronic devices.
The 3 mm width allows for compatibility with various application designs, especially in compact PCBs.
As a switching regulator, it provides high efficiency and adaptability for different voltage conversion needs.
This nominal input voltage is suitable for many battery-operated devices, ensuring optimal performance.
The compact length contributes to space efficiency on PCBs, allowing for more functionality in smaller devices.
A high switching frequency allows for smaller inductors and capacitors, reducing overall circuit size while improving efficiency.
With a maximum output current of 1.4 A, this regulator can power various loads effectively, making it versatile for different applications.
CMOS technology provides low power consumption and high integration, making it suitable for portable applications.
Gull wing terminals simplify the soldering process and enhance mechanical stability in PCB assemblies.
As a buck switcher, it is efficient for stepping down voltage with minimal energy loss, optimal for battery-powered devices.
A terminal pitch of 0.65 mm allows for high-density designs, accommodating more components in tight spaces.
The minimum input voltage of 2 V enables this regulator to function effectively in low-voltage applications.
Supporting a maximum input voltage of 5.5 V, this regulator can handle a variety of power sources, enhancing its versatility.
Switching Regulators & Controllers L6926D013TR attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Other IC type:
Control Mode:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
L6926D013TR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
General Instrument
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TPS62933PDRLR
TPS62933PDRLR by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 150°C. It offers a max output voltage of 22V and current up to 3A, using pulse width modulation for control. Ideal for applications requiring efficient power conversion in compact spaces.
SG3525AP013TR
SG3525AP013TR by STMicroelectronics is a 16-terminal switching controller with PWM control mode, operating b/w 0-70°C. It has a max output current of 0.5A and supports a max switching frequency of 500kHz. Ideal for applications requiring voltage-mode control in small outline packages.
EMC2305-1-AP-TR
Standard Microsystems
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
TPS54332DDAR
TPS54332DDAR by Texas Instruments is a switching regulator with 3.5A output current, 1000kHz max switching frequency, and -40 to 150°C operating temperature range. Ideal for automotive applications due to its low profile design and pulse width modulation control technique.
LM2672M-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2576T-ADJ
Semtech
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
LM2675MX-12/NOPB
LM2675MX-12/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 12V nominal output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its DMOS technology and wide temperature range (-40 to 125°C).
LM51561HPWPR
LM51561HPWPR by Texas Instruments is a switching controller with a 12V nominal input voltage, operating b/w -40 to 150°C. It features a buck-boost switcher configuration, current-mode control mode, and pulse width modulation technique. Ideal for automotive applications due to AEC-Q100 screening level and moisture sensitivity level of 3.
MC34063AP
MC34063AP by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and BUCK-BOOST switcher config. It operates b/w 0 to 70 °C with input voltage range of 3-40 V. Ideal for applications requiring a max output current of 1.5 A at up to 100 kHz switching frequency.
SG3525ANG
Onsemi
SG3525ANG by Onsemi is a VOLTAGE-MODE switching controller with 16 terminals. It operates b/w 0-70°C, handles up to 400 kHz switching frequency, and supports push-pull switcher config. Ideal for applications requiring PWM control of power converters in the commercial temperature range.
LM5156HQPWPRQ1
LM5156HQPWPRQ1 by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. It operates in automotive-grade temperatures from -40°C to 150°C, making it suitable for various automotive applications. With a compact package style and high switching frequency of 2200 kHz, it offers efficient power management solutions.
LT1616ES6#TRMPBF
Analog Devices
LT1616ES6#TRMPBF by Analog Devices is a small outline switching regulator with 6 terminals. It operates b/w 0-70°C, supporting input voltages from 3.6V to 25V and output currents up to 0.85A. Ideal for applications requiring pulse width modulation control at a max frequency of 1800 kHz.
MC33063ADRG4
MC33063ADRG4 by Texas Instruments is a voltage-mode switching regulator with 5V nominal input and output voltages up to 40V. It operates in industrial temperature range (-40 to 85°C) with PWM control technique at a max frequency of 100 kHz. Ideal for applications requiring compact design, high efficiency, and low power consumption.
MCP16301T-E/CH
Microchip Technology
MCP16301T-E/CH by Microchip: 0.6A output, 2-15V range, 550kHz frequency. Ideal for automotive applications due to -40 to 125°C temp range and compact design with small outline and low profile package style.
TPS54821RHLR
TPS54821RHLR by Texas Instruments is a switching regulator with 8A output current, 1600kHz max switching frequency, and 125°C max operating temp. Ideal for automotive applications due to its -40 to 125°C temp range, BUCK switcher config, and 12V nominal input voltage.
LM2674MX-5.0/NOPB
LM2674MX-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 0.5A, nominal output voltage of 5V, and supports buck configuration. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and DMOS technology with PWM control technique at a max frequency of 260kHz.
LMZM23600V5SILT
LMZM23600V5SILT by Texas Instruments is a switching regulator with a max output current of 0.5A and a control technique of pulse width modulation. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications requiring stable power supply solutions. With a compact rectangular package style and surface-mount design, this IC offers efficient buck-boost switching configurations for voltage regulation in tight spaces.
LTC3892EUH-2#PBF
Linear Technology
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LM5008ASDX/NOPB
LM5008ASDX/NOPB by Texas Instruments is a switching regulator with a max output voltage of 75V and max output current of 0.35A. Operating in temperatures from -40 to 125°C, it's ideal for automotive applications due to its small outline package and wide input voltage range of 6-95V. With a max switching frequency of 600kHz, this device is suitable for various power management needs.
UCC28C45DR
UCC28C45DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications requiring precise control and efficiency. The package style is small outline with dual terminals, ideal for compact designs where space is limited.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L6920DBTR
STMicroelectronics L6920DBTR is a switching regulator with 8 terminals, operating temperature range of -40 to 85°C. It features voltage-mode control, boost configuration, and pulse frequency modulation technique. Ideal for industrial applications requiring a compact design and high switching frequency up to 1000 kHz.
L6928D013TR
L6928D013TR by STMicroelectronics is a small outline switching regulator with a max output current of 1.65A and a max switching frequency of 1400kHz. It operates in buck configuration, suitable for applications requiring efficient power conversion in compact spaces like portable electronics.
L6920DTR
L6920DTR by STMicroelectronics is a switching regulator with a max output current of 1.2A and a max switching frequency of 143kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring boost switcher configuration. The IC has a small outline package style, making it ideal for space-constrained designs.
L6920DCTR
L6920DCTR by STMicroelectronics is a switching regulator with 10 terminals, VOLTAGE-MODE control mode, and PULSE FREQUENCY MODULATION technique. It operates at a max frequency of 1000 kHz, supports boost configuration, and has a max output current of 0.9 A. Ideal for applications requiring efficient voltage regulation in compact spaces.
L6920DB
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
L6920D
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
L6920DC
L6920DC by STMicroelectronics is a switching regulator with a max output current of 0.9A and a max switching frequency of 1000kHz. It operates in voltage-mode control technique, suitable for boost switcher configuration applications. The package style is small outline, thin profile, shrink pitch, making it ideal for compact electronic devices.
L6926013TR
L6926013TR by STMicroelectronics is a switching regulator with 1.65A output current, 800kHz max switching frequency, and -40 to 125°C operating temperature range. Ideal for automotive applications, it features a small outline package with matte tin finish and pulse width modulation control technique.
L6926Q1
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
L6925D
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE, THIN PROFILE, SHRINK PITCH;
L6928D
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES; Minimum Input Voltage: 2 V;
L6925D013TR
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES; Nominal Input Voltage: 3.6 V;
L6926
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
L6926D1013TR
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
L6925013TR
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES; Control Mode: CURRENT-MODE;
L6926Q1TR
L6926D
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
L6920
L6926D1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved