Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .4 A; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e3;
Median Price
$0.106
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.210
100+ parts
$0.104
1k+ parts
$0.069
10k+ parts
-
Mouser Electronics
$0.056
TTI
$0.047
Farnell
$0.031
$0.030
Newark
$0.149
Element14
$0.064
$0.055
DF Sales Co.
$0.020
Nova Conductors
$0.044
Bristol Electronics
$0.113
$0.022
$0.014
Component Electronics Inc.
$0.460
$0.350
$0.300
Vyrian
SPM Sales
Prism Electronics
Chip Stock
Inventory MP
NPI Materials, Inc.
EMSNET
Connector Distribution Corp
Right Parts Inc.
ComSIT Distribution GmbH
Semi Source
Lantek
Sensible Micro Corp
A2Z Electronics, Inc.
Goldney Electronics S.L.
Argo Parts USA
$0.043
Advanced Electronics
$0.045
Corohmni
$0.046
Aztec Data Supply Inc.
$2.303
Metaverse IC Inc.
Eastek
Perfect Parts
Kepictronics
Continental Prestige Electronics
$0.040
$0.032
GreenTree Electronics
Netroflash
$0.042
$0.041
Data Line Filters LI0603D301R-10 attributes and parameters. Explore more Data Line Filters devices from Steward
Maximum DC Resistance:
Filter Type:
JESD-609 Code:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Rated Current:
Terminal Finish:
LI0603D301R-10 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Diodes Incorporated
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crystalonics
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
Fairchild Semiconductor
M39029/56-351
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Electronic Transistors
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bytesonic Electronics
SRF0905-102Y
Bourns
Bourns SRF0905-102Y is a data line filter with 2 functions, rated voltage of 50V, and inductance of 1000uH. It operates b/w -40 to 105°C and has a max DC resistance of 0.31 ohm. Ideal for applications requiring filtering in data lines with dimensions L9.2XB6.0XH5.0mm.
742792096
Wuerth Elektronik & Kg
742792096 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with 2 terminals, suitable for surface mount applications. It has dimensions of L2.0xB1.2xH0.9 (mm) and operates b/w -55 to 125 °C, offering a max DC resistance of 0.3 ohm at 100 MHz frequency. Ideal for maintaining signal integrity in electronic circuits with an output impedance of 1000 OHM and rated current of 1 A.
BLM21PG331SN1
Murata Manufacturing
Murata Manufacturing's BLM21PG331SN1 is a Ferrite Chip Data Line Filter with 330 Ohm Output Impedance, 1.5A Rated Current, and -55 to 125°C Operating Temperature range. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
742792035
Wurth Elektronik 742792035 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.3 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it is designed for surface mount installation in electronic devices up to 220 MHz frequency range.
BLM21PG331SN1D
BLM21PG331SN1D by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.07 ohm and output impedance of 330 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
4300-025LF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 5 A; Terminal Finish: Gold (Au); Mounting Type: THROUGH HOLE MOUNT; Maximum Insertion Loss: 60 dB; Minimum Insulation Resistance: 10000 Mohm;
742792716
Wurth Elektronik 742792716 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C. With dimensions of L1.0xB0.5xH0.5 (mm), it's ideal for surface mount applications requiring output impedance of 60 ohm and rated current of 0.3A.
DR331-513AE
Bourns DR331-513AE is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. With dimensions of L7.3xB5.4xH4.7 (mm), it's ideal for surface mount applications in temperature range -40 to 135°C, offering max DC resistance of 0.3 ohm and rated current of 0.5A.
BLM15PX330SN1D
Murata Manufacturing's BLM15PX330SN1D is a FERRITE CHIP data line filter with 33 OHM output impedance, 1.7A rated current, and -55 to 125 °C operating temperature range. Ideal for surface mount applications in electronics to suppress electromagnetic interference.
EMI9408MUTAG
EMI9408MUTAG by Onsemi is a data line filter with 8 functions and 16 terminals. It offers an inductance of 0.07uH, capacitance of 24uF, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a temperature range from -40 to 85°C.
HI1206T161R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .018 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
PA4339.701NLT
Pulse Electronics
PA4339.701NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 5uH and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with 4A rated current and output impedance of 700 ohm.
4400-076LF
FEED THROUGH CAPACITOR; Rated Current: 10 A; JESD-609 Code: e4; Maximum Operating Temperature: 125 Cel; Mounting Type: PANEL MOUNT; Maximum Insertion Loss: 28 dB;
MPZ2012S601A
TDK
The TDK MPZ2012S601A is an 0805 chip bead data line filter with a ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.1 ohm, and output impedance of 600 ohm. Ideal for applications requiring noise suppression in data lines at frequencies up to 100 MHz.
LI0805H151R-10
FERRITE CHIP; Construction: Chip; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
SRF0905-100Y
Bourns SRF0905-100Y is a Data Line Filter with 2 functions, rated voltage of 50V, and inductance of 10uH. It operates b/w -40°C to 105°C, has a max DC resistance of 0.08 ohm, and output impedance of 200 ohm. Ideal for surface mount applications requiring filtering in data lines with a current rating of 1.6A.
BLM18EG391TN1D
Murata Manufacturing's BLM18EG391TN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers a frequency range of 100-1000 MHz and DC resistance of 0.3 ohm. Ideal for surface mount applications, providing an output impedance of 520 ohm at a rated current of 0.5A.
NFL21SP506X1C3D
Murata Manufacturing's NFL21SP506X1C3D is a 16V data line filter with 1000 Mohm insulation resistance. Featuring 0.305uH inductance, it operates b/w -55 to 125 °C and has a rated current of 0.15A. Ideal for applications requiring noise suppression in data lines with three terminals, this surface mount filter measures L2.0xB1.25xH0.85mm and uses TIN terminal finish.
ACM2520-801-3P-T002
ACM2520-801-3P-T002 by TDK is a FERRITE CHIP data line filter with 3 functions. It has a rated voltage of 20V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications and has dimensions of L2.5XB2.0XH1.2 (mm).
BLM15EG221SN1D
BLM15EG221SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 0.5A, and output impedance of 220 ohm. It operates b/w -55 to 125 °C, suitable for applications requiring filtering in the frequency range of 100-1000 MHz. This surface mount ferrite chip is compact at L1.0xB0.5xH0.5 mm and ideal for noise suppression in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LI0603D301R-10
Laird Technologies
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .35 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .4 A;
LI0603G800R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .7 A;
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .7 A; Length: 1.6 mm; Width (mm): 0.8; Dimensions: L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch);
LI0603D301R-00
DATA LINE FILTER; Construction: Chip Bead; Maximum DC Resistance: .35 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .4 A;
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .4 A; JESD-609 Code: e0; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 300 OHM;
LI0603E151R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .25 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .5 A;
LI0603E470R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .5 A;
LI0603G121R-10
LI0603G221R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .7 A;
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .7 A;
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .7 A;
LI0603B201R-10
FERRITE CHIP; Maximum DC Resistance: .4 ohm; Rated Current: .2 A; Packing Method: TAPE AND REEL; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2;
FERRITE CHIP; Maximum DC Resistance: .25 ohm; Rated Current: .5 A; Dimensions: L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch); No. of Functions: 1; JESD-609 Code: e3;
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: .5 A; No. of Functions: 1; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved