Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Steward's LI0603G221R-10 is a chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering 220 OHM output impedance at 100 MHz frequency. Ideal for surface mount applications, it measures L1.6xB0.8xH0.8 mm and has a max DC resistance of 0.3 ohm.
Median Price
$0.050
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.130
100+ parts
$0.065
1k+ parts
$0.044
10k+ parts
$0.029
Mouser Electronics
$0.062
$0.054
-
PSC Electronics
$0.163
Sager
Element14
$0.046
$0.041
Heilind Electronics
$0.021
TTI
Farnell
$0.033
$0.030
Newark
$0.070
Interstate Connecting
$0.023
Verical
$0.053
Prism Electronics
SPM Sales
Q Components
LIBRA Elektronik GmbH
Semtec, LLC
Connector Distribution Corp
Right Parts Inc.
Inventory MP
Bristol Electronics
EMSNET
Sensible Micro Corp
Rebound Electronics
Metaverse IC Inc.
Kepictronics
Perfect Parts
Glotronic Ltd.
A-Z Elektronik GmbH
Alle Elektronik GmbH
Chip beads provide excellent filtering capabilities and are ideal for noise suppression in electronic circuits.
Having 2 terminals allows for easy connection to the circuit, making installation straightforward.
0603 case code ensures compatibility with a wide range of surface mount applications.
Ferrite chip filters offer high impedance at high frequencies, effectively reducing electromagnetic interference.
With a high maximum operating temperature, this filter is suitable for various environments and applications.
The low minimum operating temperature ensures reliability in extreme cold conditions.
Matte tin finish with nickel barrier provides corrosion resistance and ensures reliable electrical connections.
Compact width allows for space-saving installation in tight PCB layouts.
Effective filtering at 100 MHz and higher frequencies helps prevent signal distortion.
Low DC resistance minimizes power loss and heat generation in the filter.
Optimal length for efficient noise filtering and interference suppression.
Capable of filtering out noise and interference up to 100 MHz for clean signal transmission.
Output impedance of 220 ohms helps match impedance levels and reduce signal reflections.
Tape and reel packaging ensures convenient handling and protection during shipping and storage.
Surface mount design facilitates easy and secure installation on PCBs.
Compact dimensions make this filter suitable for miniaturized electronic devices and tight spaces.
With a rated current of 0.7 A, this filter can effectively handle moderate current loads.
Low profile height allows for easy integration into slim electronic designs.
Ferrite material provides high magnetic permeability, making it an excellent choice for noise suppression filters.
Data Line Filters LI0603G221R-10 attributes and parameters. Explore more Data Line Filters devices from Steward
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
LI0603G221R-10 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
Frontier Electronics
Boca Semiconductor
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358D-T
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
W2F15C4738AT1F
KYOCERA AVX
W2F15C4738AT1F by KYOCERA AVX is a data line filter with 3 terminals, rated for 50V and 0.3A current. Featuring a feed through capacitor design, it offers high insulation resistance of 1000 Mohm and capacitance of 47000 uF. Ideal for applications requiring surface mount filters in temperature range -55 to 125 °C.
CM1624-08DE
CM1624-08DE by Onsemi is a 4-function data line filter with a rated voltage of 2.5V, inductance of 0.02uH, and max DC resistance of 46 ohm. It operates b/w -40 to 85 °C and has dimensions of L3.4XB1.45XH0.55 (mm). Ideal for applications requiring efficient data line filtering in compact spaces.
ACM7060-701-2PL-TL
TDK
ACM7060-701-2PL-TL by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has 4 terminals, insulation resistance of 10 Mohm, and DC resistance of 0.015 ohm. Ideal for applications requiring noise suppression in data lines.
BLM18PG471SN1J
Murata Manufacturing
Murata Manufacturing's BLM18PG471SN1J is a chip bead data line filter with 2 terminals, 0603 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.2 ohm, and output impedance of 470 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies up to 100 MHz.
ACM1211-102-2PL
ACM1211-102-2PL by TDK is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 85°C. Ideal for applications requiring high insulation resistance, low DC resistance, and surface mounting type.
HI1206T161R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .018 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
BLM18PG121SN1J
Murata Manufacturing's BLM18PG121SN1J is a chip bead data line filter with 2 terminals, dimensions of 1.6x0.8x0.8mm, and output impedance of 120Ω. It operates b/w -55°C to 125°C, has a DC resistance of 0.05 ohm, and is suitable for surface mount applications in filtering frequencies from 100 MHz with a rated current of 2A.
FBMH3216HM221NT
Taiyo Yuden
FBMH3216HM221NT by Taiyo Yuden is a chip bead data line filter with dimensions of 3.2x1.6x1.6mm, suitable for surface mount applications. It offers an output impedance of 220Ω, rated current of 4A, and operates b/w -40°C to 125°C. Ideal for noise suppression in circuits with frequencies ranging from 100MHz and DC resistance of 0.02Ω.
ECMF02-4CMX8
STMicroelectronics ECMF02-4CMX8 is a DATA LINE FILTER with 2 functions and 8 terminals. It has a max operating temp of 125°C, DC resistance of 4 ohm, and output impedance of 50 OHM. Ideal for applications requiring data line filtering in compact spaces due to its small dimensions (2.55mm x 1.25mm x 0.6mm).
LFBKP2125HS221-T
LFBKP2125HS221-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 85°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for applications requiring an output impedance of 220 OHM, rated current of 2A, and surface mounting type.
BLM21PG221SN1J
Murata Manufacturing's BLM21PG221SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125 °C. With a width of 1.25mm and length of 2mm, it offers an output impedance of 220 ohm for data line filtering applications at frequencies ranging from 100 MHz.
BNX028-01L
Murata Manufacturing's BNX028-01L is a data line filter with 2 functions, rated at 16V and 20A. It operates b/w -40°C to 105°C, offering high insulation resistance of 1100 Mohm. Ideal for surface mount applications in various electronic devices.
FLTR75V05Z
Abb
FLTR75V05Z by Abb is a 2-function data line filter module with UL, CAN, CSA, VDE, EN approvals. It operates at 75V and 5A with max DC resistance of 0.02 ohm. Ideal for applications requiring filtering in data lines due to its compact dimensions and wide temperature range (-40°C to 100°C).
744822120
Wuerth Elektronik & Kg
The Wurth Elektronik 744822120 Data Line Filter has a rated voltage of 250V, inductance of 20000uH, and max operating temperature of 125°C. It is UL approved with 2 functions and suitable for applications requiring noise suppression in data lines.
4400-099LF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; Capacitance: 50000 uF; Rated Voltage: 50 V; Terminal Finish: Silver (Ag); Maximum Insertion Loss: 70 dB;
744212510
The Wurth Elektronik 744212510 is a data line filter with a rated voltage of 80V and inductance of 51uH. It has a max operating temperature of 105°C and is suitable for surface mount applications.
MPZ1608S601A
TDK's MPZ1608S601A is a FERRITE CHIP filter with 2 terminals, rated for 1A current. It offers low DC resistance of 0.15 ohm and output impedance of 600 ohm. Ideal for data line filtering in applications requiring compact surface mount components.
BLM18PG471SN1B
Murata Manufacturing's BLM18PG471SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.2 ohm, output impedance of 470 OHM, and rated current of 1 A. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
PA4339.101NLT
Pulse Electronics
PA4339.101NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 1.8uH and can handle up to 9A current. Ideal for applications requiring noise filtering in automotive electronics due to its compact size and high impedance output.
MMZ2012Y202B
The TDK MMZ2012Y202B is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, matte tin finish, and dimensions of L2.0xB1.25xH0.85 (mm). With a max operating temperature of 125°C and rated current of 0.4A, it is ideal for surface mount applications requiring an output impedance of 2000 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved