Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata's BLM18RK601SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and DC resistance of 0.6 ohm. With dimensions of 1.6x0.8x0.8mm, this filter is suitable for maintaining an output impedance of 600 ohm at frequencies ranging from 100 MHz to TAPE AND REEL packaging method.
Median Price
$0.020
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.100
100+ parts
$0.044
1k+ parts
$0.030
10k+ parts
Mouser Electronics
$0.045
TTI Europe
-
$0.012
RS (Exports)
$0.010
Arrow
$0.019
Verical
Chip1Stop
$0.032
$0.021
TTI
Future Electronics
$0.022
Ozdisan Elektronik
Nova Conductors
$0.024
TME
$0.130
$0.058
$0.039
$0.031
Rutronik
$0.011
NAC Semi
$0.036
Vyrian
Bristol Electronics
$0.110
$0.033
Chip Stock
IBS Electronics
Rebound Electronics
Dan-Mar Components
Prism Electronics
ACDS - Activité Composants Distribution Service
Euro-Tech
PC Components Company LLC
ComSIT Distribution GmbH
Florida Circuit
Elcom Components
Legend Electronics Inc.
Connector Distribution Corp
Right Parts Inc.
LWI Electronics Inc
Semi Source
VNN
Semicontronic
$0.009
Bastille Electronics
$0.023
Argo Parts USA
Continental Prestige Electronics
Advanced Electronics
Aztec Data Supply Inc.
$2.820
Corohmni
$3.061
Eastek
Perfect Parts
Authorized Procurement Solutions
GreenTree Electronics
RC Electronics
Kepictronics
Cyclops Electronics Ltd (Excess)
The chip bead construction provides excellent filtering capabilities.
Having 2 terminals allows for easy connectivity in circuit designs.
The 0603 case code ensures compatibility with standard design layouts.
The ferrite chip filter type offers effective noise reduction.
With a high maximum temperature, this filter is durable and reliable.
The low minimum temperature ensures usability in various environments.
The tin terminal finish provides corrosion resistance for longevity.
The slim 0.8mm width allows for space-saving installation.
The filter's minimum frequency ensures effective noise suppression.
A low maximum resistance level ensures efficient signal transmission.
The compact 1.6mm length makes this filter suitable for small spaces.
The high maximum frequency enables effective signal filtering.
The output impedance of 600 ohms is ideal for noise reduction.
The tape and reel packaging simplifies handling and storage.
The surface mount design facilitates easy installation on PCBs.
The compact dimensions offer versatility in installation options.
A rated current of 0.2 A ensures compatibility with various circuit requirements.
The low height profile allows for placement in tight spaces.
Made of ferrite, this filter provides excellent magnetic properties for noise suppression.
Data Line Filters BLM18RK601SN1D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BLM18RK601SN1D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Baneasa S A
Onsemi
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
Vishay Intertechnology
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Sangdest Microelectronics (Nanjing)
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
Surge Components
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
MPZ2012S601AT000
TDK
TDK's MPZ2012S601AT000 is an 0805 chip bead filter with a ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for data line filtering applications due to its compact size and high rated current of 2 A.
BLM18KG601SH1D
Murata Manufacturing
Murata's BLM18KG601SH1D is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and operates b/w -55°C to 125°C. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
BLM21BD601SN1D
Murata's BLM21BD601SN1D is an 0805 chip bead filter with 2 terminals, ideal for data line filtering. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.35 ohm at 100 MHz frequency. This ferrite chip has dimensions L2.0xB1.25xH0.85 mm and rated current of 0.2 A, suitable for surface mount applications in various electronic devices.
ACF451832-153-TD01
ACF451832-153-TD01 by TDK is a data line filter with 1000 Mohm insulation resistance, 25 dB attenuation at 70 MHz, and rated voltage of 50 V. It is ideal for applications requiring surface mount filters with dimensions L4.5XB1.8XH3.2 (mm) in tape and reel packaging.
BKP1608HS121-T
Taiyo Yuden
BKP1608HS121-T by Taiyo Yuden is a 0603 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 85°C and min freq of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 120 ohm.
HZ0805E601R-10
Laird Technologies
Laird Technologies' HZ0805E601R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 600 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.3 ohm and can handle up to 0.5 A rated current.
MI0603L221R-10
MI0603L221R-10 by Laird Technologies is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min frequency of 25 MHz. This filter is used for surface mount applications to reduce noise in data lines.
MPZ2012S101A
The TDK MPZ2012S101A is an 0805 chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.02 ohm and output impedance of 100 ohm at 100 MHz. Ideal for surface mount applications, it provides effective filtering in electronic circuits requiring noise suppression.
BMB2A0300LN2
TE Connectivity
TE Connectivity's BMB2A0300LN2 is a 0805 case FERRITE CHIP filter with 300 OHM output impedance, 0.15 ohm DC resistance, and 0.6 A rated current. Ideal for data line filtering applications, this multilayer chip operates b/w -55 to 125 °C at frequencies ranging from 100 MHz.
SRF0504-152Y
Bourns
Bourns SRF0504-152Y is a 2-function data line filter with inductance of 3.6uH and rated current of 1A. It operates b/w -40 to 125°C, has a max DC resistance of 100 ohm, and output impedance of 1500 ohm. Ideal for applications requiring surface mount filters in compact spaces.
BLM15AG601SN1D
Murata Manufacturing's BLM15AG601SN1D is a 0402 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.52 ohm, and output impedance of 600 ohm. Ideal for data line filtering applications due to its compact size (L1.0xB0.5xH0.5 mm) and rated current of 0.3 A.
MPZ1608S601ATA00
TDK's MPZ1608S601ATA00 is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.15 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
HZ0603B102R-10
Laird Technologies' HZ0603B102R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.6 ohm and output impedance of 1000 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
NFM31PC276B0J3L
Murata Manufacturing's NFM31PC276B0J3L is a 6.3V feed-through capacitor with 27,000,000uF capacitance and 6A rated current. It operates b/w -40°C to 85°C, ideal for data line filtering applications requiring high insulation resistance of 20 Mohm. This surface mount filter has three terminals and comes in tape and reel packaging.
BLM18PG471SZ1D
Murata Manufacturing's BLM18PG471SZ1D is a FERRITE CHIP filter with 470 OHM output impedance, suitable for data line filtering applications. With AEC-Q200 screening and 1A rated current, it operates b/w -55 to 125 °C, making it ideal for automotive electronics. This surface mount chip has 2 terminals, measures 1.6mm in length and 0.8mm in width, with a max DC resistance of 0.2 ohm.
HZ0603B112R-10
HZ0603B112R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With a max frequency of 1000 MHz and DC resistance of 0.8 ohm, it is ideal for applications requiring noise suppression in high-frequency circuits. This surface mount filter measures L1.6XB.8XH.8 mm and has an output impedance of 1100 OHM, making it suitable for compact electronic devices.
NUF6400MNTBG
NUF6400MNTBG by Onsemi is a 6-function data line filter with 30 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring noise filtering in data transmission systems.
BLM15AX121SN1D
Murata Manufacturing's BLM15AX121SN1D is a chip bead data line filter with 2 terminals, rated for 0.7A current and 120 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L1.0xB0.5xH0.5 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.
LI0805H151R-10
LI0805H151R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a max frequency of 1000 MHz and output impedance of 150 OHM. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.8 A and is designed for frequencies ranging from 25 MHz to 1000 MHz.
BLM41PG102SN1L
Murata Manufacturing's BLM41PG102SN1L is a chip bead data line filter with 2 terminals, rated for 1.5A current and 1000 ohm output impedance. With dimensions of L4.5XB1.6XH1.6 (mm), it operates b/w -55 to 125 °C, ideal for surface mount applications in filtering frequencies from 100 MHz with max DC resistance of 0.09 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM18PG121SN1D
Murata's BLM18PG121SN1D is a chip bead data line filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, offering 120 ohm impedance at 100MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
BLM18AG102SN1D
Murata Manufacturing's BLM18AG102SN1D is a chip bead data line filter with 2 terminals, rated for 0.4A current. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C and offers an output impedance of 1000Ω at frequencies up to 100MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM18PG471SN1D
BLM18PG471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
BLM15AG121SN1D
Murata Manufacturing's BLM15AG121SN1D is a 0402 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.19 ohm, it offers an output impedance of 120 OHM at a frequency range of 100 MHz. Ideal for data line filtering applications due to its compact size and surface mounting type.
BLM18HE152SN1D
BLM18HE152SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. It offers a DC resistance of 0.5 ohm, output impedance of 1500 ohm, and rated current of 0.4 A. Ideal for applications requiring surface mount filters in the frequency range of 100-1000 MHz.
BLM18AG601SN1D
Murata's BLM18AG601SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
BLM18AG121SN1D
Murata Manufacturing's BLM18AG121SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -55°C to 125°C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
BLM18EG221SN1D
Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.
BLM18PG600SN1D
Murata Manufacturing's BLM18PG600SN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.1 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for surface mount applications, this ferrite chip filter is designed to handle up to 0.5A rated current in various electronic circuits.
BLM18PG300SN1D
BLM18PG300SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1A, and output impedance of 30 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6xB0.8xH0.8 mm. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM15AG100SN1D
Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.
BLM18SG121TN1D
Murata Manufacturing's BLM18SG121TN1D is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, offering 120 ohm output impedance at 100MHz frequency. Ideal for surface mount applications requiring effective filtering in compact spaces.
BLM15AG221SN1D
Murata's BLM15AG221SN1D is a 0402 chip bead filter with 220 ohm output impedance, 0.29 ohm DC resistance, and 0.45 A rated current. It operates b/w -55 to 125 °C and is ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM18PG181SN1D
Murata Manufacturing's BLM18PG181SN1D is a chip bead data line filter with 2 terminals, rated for 1.5A current and 180 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
BLM18EG601SN1D
Murata's BLM18EG601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.35 ohm, output impedance of 700 OHM, and rated current of 0.5 A. Ideal for surface mount applications in filtering frequencies from 100 MHz to 1000 MHz.
BLM18KG601SN1D
Murata Manufacturing's BLM18KG601SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 0.8mm width. Operating b/w -55 to 125 °C, it has a DC resistance of 0.15 ohm and output impedance of 600 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz.
BLM15AG102SN1D
Murata Manufacturing's BLM15AG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.65 ohm, suitable for surface mount applications in electronics for impedance matching and noise suppression.
BLM18HE102SN1D
BLM18HE102SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.35 ohm. Ideal for surface mount applications in electronics requiring impedance matching up to 1000 OHM at frequencies ranging from 100 MHz to 1000 MHz.
BLM15HG102SN1D
Murata Manufacturing's BLM15HG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 1.1 ohm and an output impedance of 1000 ohm for frequencies ranging from 100MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved