Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bus Controllers; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 25; Package Code: FBGA; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Cyclops Electronics Ltd
1+ parts
100+ parts
1k+ parts
10k+ parts
A-Z Elektronik GmbH
Kepictronics
Perfect Parts
Cyclops Electronics Ltd (Excess)
Bus Controllers ISP1302UKTS attributes and parameters. Explore more Bus Controllers devices from St-ericsson
JESD-30 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current:
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
ISP1302UKTS Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
ST-Ericsson was a multinational manufacturer of wireless products and semiconductors, supplying to mobile device manufacturers. ST-Ericsson was a 50/50 joint venture of Ericsson and STMicroelectronics established on 3 February 2009 and dissolved 2 August 2013.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Fairchild Semiconductor
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
Vicor
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
USB5534B-5000JZX
Microchip Technology
Microchip Technology's USB5534B-5000JZX is a BUS CONTROLLER IC with 64 terminals, operating at 25 MHz clock frequency. It supports I2C, SMBUS, SPI, and USB buses with a data transfer rate of 625 MBps. Ideal for applications requiring high-speed data communication in commercial temperature range.
CYUSB3064-BZXC
Cypress Semiconductor
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Terminal Form: BALL; No. of Terminals: 121; Package Code: LFBGA; Package Shape: SQUARE; Maximum Seated Height: 1.7 mm;
TUSB2046BIRHBRG4
TUSB2046BIRHBRG4 by Texas Instruments is a USB bus controller with 32 terminals, operating at 3.3V and supporting data transfer rates up to 12 MBps. It has a max clock frequency of 6 MHz, suitable for industrial applications requiring USB compatibility and a temperature range from -40 to 85°C.
PCI2250PGF
PCI2250PGF by Texas Instruments is a PCI bus controller with 32-bit address and external data bus width. Operating at 3.3/5V, it supports a max clock frequency of 33.33MHz. Ideal for commercial applications requiring PCI bus compatibility in compact spaces with its low profile flatpack package style.
FUSB307BVMPX
Onsemi
FUSB307BVMPX by Onsemi is a BUS CONTROLLER IC with 16 terminals, operating voltage range of 2.8V to 5.5V, and industrial temperature grade (-40°C to 105°C). It is designed for UNIVERSAL SERIAL BUS applications, featuring a compact square chip carrier package suitable for surface mount assembly.
USB2513B-AEZG
Microchip Technology's USB2513B-AEZG is a 36-terminal bus controller with a max clock frequency of 24 MHz. It operates b/w 0-70°C, compatible with I2C, SMBUS, and USB buses. This CMOS technology chip has a nominal voltage of 3.3V and is ideal for various commercial applications requiring high-speed data transfer.
PI7C9X2G303ELZXEX
Diodes Incorporated
Diodes Inc. PI7C9X2G303ELZXEX is a 136-terminal bus controller with max supply voltage of 1.1V and data transfer rate of 625MBps. Ideal for industrial applications, it supports I2C, ISA, SMBUS, and VGA bus compatibility at an operating temperature range of -40 to 85°C.
USB5537B-6070AKZE
Microchip Technology's USB5537B-6070AKZE is a BUS CONTROLLER IC with 72 terminals, operating at 25 MHz clock frequency. It supports I2C, SMBUS, SPI, and USB buses with a data transfer rate of 625 MBps. Ideal for applications requiring high-speed data communication in commercial temperature environments.
PCI9054-AC50PIF
Plx Technology
BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 176; Package Code: FQFP; Package Shape: SQUARE;
USB2512BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
PI7C9X2G612GPDNJEX
PI7C9X2G612GPDNJEX by Diodes Inc. is a bus controller with 196 terminals, operating at 100 MHz clock frequency and supporting data rates up to 625 MBps. It is designed for applications requiring PCI bus compatibility, such as I2C and SMBus communication protocols. The package style is a low-profile grid array in a square shape, suitable for surface mount assembly with a max seated height of 1.5 mm.
PM40028B1-F3EI
PM40028B1-F3EI by Microchip Technology is a bus controller IC with 753 terminals in a square plastic/epoxy package. It supports I2C, SMBUS, and UART buses, making it ideal for PCI applications requiring CMOS technology and surface mount installation.
UPD720201K8-711-BAC-A
Renesas Electronics
Renesas Electronics UPD720201K8-711-BAC-A is a Bus Controller with 68 terminals, operating at 3.3V. It features a temperature range of -40 to 85°C and is surface mountable. Ideal for industrial applications requiring high-speed data transfer in compact form factor.
VNC2-48L1C
The FTDI VNC2-48L1C is a 48-terminal bus controller with a supply voltage range of 1.62V to 1.98V, suitable for automotive applications. It supports SPI, UART, and USB buses with RS232, RS422, and RS485 drive interfaces. Operating temperature ranges from -40°C to 125°C in a low-profile flatpack package style.
USB5742B/2GX01
Microchip Technology's USB5742B/2GX01 is a BUS CONTROLLER with 56 terminals, operating at 1.08-1.32 V, supporting I2C, SMBUS, SPI, and USB buses. It offers a data transfer rate of 625 MBps at a clock frequency of 25 MHz. Ideal for applications requiring high-speed data transfer in compact spaces with its square shape and low seated height of 1 mm.
USB3343-CP
Microchip Technology's USB3343-CP is a CMOS BUS CONTROLLER with 24 terminals in a SQUARE CHIP CARRIER package. It operates at 1.6-2V, supports USB and VBUS, and has an 8-bit external data bus width. Ideal for applications requiring a max clock frequency of 60MHz and operating temperatures b/w -40 to 85°C.
TUSB3210PM
TUSB3210PM by Texas Instruments is a 64-terminal bus controller with 3.3V power supply, operating at temperatures from 0 to 70°C. It features a max clock frequency of 12MHz and supports USB peripheral ICs. Ideal for applications requiring low-profile, fine-pitch package styles in commercial-grade environments.
USB4604-1080HN-TR
The Microchip Technology USB4604-1080HN-TR is a BUS CONTROLLER IC with 48 terminals, operating at 1.6-2V. It supports I2C, SMBUS, SPI, UART, and USB buses with a data transfer rate of 60MBps. Ideal for applications requiring high-speed data communication in commercial temperature environments.
PCA9542APW-T
NXP Semiconductors
PCA9542APW-T by NXP Semiconductors is a bus controller with 14 terminals, operating at -40 to 85°C. It has dual terminal positions and supports power supplies of 2.5/5V. Ideal for industrial applications requiring precise temperature control and low supply current of 0.1mA.
CY7C65642-28LTXC
CY7C65642-28LTXC by Infineon: 3.6V max supply, 12MHz clock freq, I2C bus compatibility. Ideal for commercial applications requiring a BUS CONTROLLER with 105.4mA max supply current and operating temp range of 0-70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
St-ericsson
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved