Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WT41-A-AI4 by Silicon Labs is a telecom IC with 59 terminals, operating temperature range of -40 to 85°C. It has a rectangular shape, no-lead terminal form, and nominal voltage of 3.3V. Ideal for industrial applications requiring telecom circuit interfaces in compact microelectronic assemblies.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Bristol Electronics
Nova Conductors
ComSIT Distribution GmbH
AZTECH Wire
$1.920
$1.840
$1.810
$1.770
Corohmni
$13.241
Advanced Electronics
$17.249
Ampacity Inc.
$781.000
Continental Prestige Electronics
Aranea Global
Perfect Parts
Argo Parts USA
Corphita
This product can be easily mounted on a PCB, reducing assembly time and simplifying the manufacturing process.
The rectangular shape allows for efficient use of board space and easy placement in the circuit design.
With a high number of terminals, this product offers a wide range of connectivity options for complex telecom systems.
The microelectronic assembly package style ensures reliability and durability for long-term use in telecom applications.
This product can operate effectively in high-temperature environments, making it suitable for industrial applications.
The 3.3 V supply voltage is a common standard in telecom systems, ensuring compatibility with existing setups.
Other Function Telecom Interface ICs WT41-A-AI4 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
WT41-A-AI4 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 23/Dec/2015
PCN Packaging - Multi Devices 15/Jan/2019
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bkc Semiconductors
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CC1200RHBT
Texas Instruments
The Texas Instruments CC1200RHBT is a telecom IC with 32 terminals, operating at 3V. It offers a data rate of 1.25 Mbps and can withstand temperatures from -40 to 85°C. Ideal for telecom circuits, this chip carrier package has a very thin profile and is surface mountable.
CLRC66302HN,157
NXP Semiconductors
The NXP Semiconductors CLRC66302HN,157 is a telecom interface IC with 32 terminals in a square chip carrier package. It operates b/w -40 to 105°C and has a data rate of 1 Mbps at 5V supply voltage. Ideal for industrial applications requiring high-speed communication in compact spaces.
MRF24WB0MA/RM
Microchip Technology
MRF24WB0MA/RM by Microchip: 3.3V supply, 36 terminals, telecom IC for commercial use. Rectangular package, surface mountable. Ideal for telecom circuit applications in temperatures from 0 to 70°C.
DA14531-00000FX2
Dialog Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: BCC; Package Shape: RECTANGULAR;
TRF7970ARHBR
TRF7970ARHBR by Texas Instruments is a telecom IC with 32 terminals, operating at 5V. It has a data rate of 0.848 Mbps and can withstand temperatures from -40 to 110°C. Ideal for telecom circuits, it comes in a square chip carrier package suitable for surface mounting applications.
CY7B933-JXI
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
CC2500RGP
CC2500RGP by Texas Instruments is a telecom IC with 20 terminals in a square chip carrier package. It operates at temperatures from -40 to 85°C, with a supply voltage of 1.8/3.6V and data rate of 0.25 Mbps. Ideal for industrial applications requiring low power consumption and compact design.
TCA8418RTWR
TCA8418RTWR by Texas Instruments is a 24-terminal telecom IC with a nominal voltage of 1.8V. It operates in industrial temperature range (-40 to 85°C) and features nickel palladium gold terminal finish. This square-shaped chip carrier is suitable for telecom circuit applications requiring very thin profile and surface mount compatibility.
TLV320AIC3104IRHBT
TLV320AIC3104IRHBT by Texas Instruments is a telecom interface IC with 2 channels and a nominal voltage of 1.8V. It has a package style of chip carrier, heat sink/slug, very thin profile and can operate in industrial temperature range (-40 to 85°C). This IC is commonly used in telecom circuits.
NEO-M8J-0
U-blox Ag
TELECOM CIRCUIT;
ZOE-M8Q-0
ZOE-M8Q-0 by U-blox Ag is a telecom IC with 51 terminals, operating at -40 to 85°C. It features a thin profile grid array package, 0.5mm terminal pitch, and 3V supply voltage. Ideal for industrial applications requiring precise positioning and reliable connectivity in compact spaces.
CY7B933-JXC
Infineon Technologies
Infineon Technologies' CY7B933-JXC is a BICMOS technology telecom IC with 28 terminals in a square chip carrier package. Operating at 5V, it supports data rates up to 400 Mbps and draws a max supply current of 155mA. Ideal for telecom circuits, this IC has a temperature range of 0-70°C and is surface mountable.
BQ51013ARHLR
BQ51013ARHLR by Texas Instruments is a telecom interface IC with 20 terminals in a chip carrier package. It operates b/w 0-125°C, has a supply voltage of 5V, and data rate of 0.002 Mbps. Ideal for telecom circuits, it features nickel/palladium/gold terminal finish and very thin profile package style.
PN7160B1HN/C100E
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
HMC244AG16
Analog Devices
HMC244AG16 by Analog Devices is a telecom IC with 16 terminals in a low profile flatpack package. It operates b/w -40 to 85°C, with gold over nickel terminal finish. Ideal for telecom circuits, it has a nominal voltage of 3V and gull wing terminal form.
CC2640F128RHBR
CC2640F128RHBR by Texas Instruments is a telecom IC with 32 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a nominal voltage of 3V. Ideal for telecom circuits, it features a terminal pitch of 0.5mm and no-lead terminal form.
MAX2769CETI+T
Maxim Integrated
TELECOM CIRCUIT; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
XB3-24Z8PS-J
Digi International
The Digi International XB3-24Z8PS-J is a telecom IC with 37 terminals, suitable for industrial applications. It operates b/w -40°C to 85°C and comes in a surface-mount rectangular package. This IC is designed for telecom circuits, offering reliable performance in various communication systems.
AP22814AW5-7
Diodes Incorporated AP22814AW5-7 is a 5-terminal, telecom interface IC in small outline package with matte tin finish. Operating temp range -40 to 85°C, suitable for industrial use. Telecom circuit type with nominal voltage of 5V, ideal for telecommunications applications.
EC25EFA-512-STD
Quectel Wireless Solutions
Quectel Wireless Solutions' EC25EFA-512-STD is a telecom IC with 150 Mbps data rate, operating at -40 to 85°C. With 144 terminals in a rectangular package, it's ideal for industrial applications requiring high-speed connectivity in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
WT41-E-AI4
Silicon Labs
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 57; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
WT41-A-AI5
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; Width: 14 mm;
WT41-E-AI3
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 57; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
WT41-E-AI
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 57; Package Shape: RECTANGULAR; Nominal Supply Voltage: 3.3 V;
WT41-E-HCI21
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 57; Package Shape: RECTANGULAR; Terminal Position: QUAD;
WT41-E-HCI
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 57; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
WT41-A-AI3
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; Nominal Supply Voltage: 3.3 V;
WT41-A-AI
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
WT41-A-HCI21
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; No. of Functions: 1;
WT41-A-HCI
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; Length: 35.55 mm;
WT41-N-AI3
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; Width: 14.5 mm;
WT41-N-AI4
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; JESD-30 Code: R-XQMA-N59;
WT41-N-AI
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; Package Style (Meter): MICROELECTRONIC ASSEMBLY;
WT41-N-HCI21
WT41-N-HCI
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; Surface Mount: YES;
WT41-A-HCI30
WT41-N-AI5
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; Length: 35.3 mm;
WT41-N-HCI30
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
WT41-A-C
WT41-N-C
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 59; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved