Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Telecom ICs;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
AZTECH Wire
$5.228
Corohmni
$13.235
Aztec Data Supply Inc.
$15.796
Ampacity Inc.
$591.000
Semicontronic
$934.000
$910.650
$905.980
Argo Parts USA
Authorized Procurement Solutions
Corphita
Continental Prestige Electronics
Bastille Electronics
WT32I-E-AI61IAP Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Loras Industries
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
SPSGRF-915
STMicroelectronics
SPSGRF-915 by STMicroelectronics is a telecom IC with 11 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 1.27mm. This surface-mount IC is ideal for industrial telecom applications due to its compact rectangular package design.
ADF7012BRUZ-RL
Analog Devices
Analog Devices' ADF7012BRUZ-RL is a telecom IC with 24 terminals, operating at 2.5/3.3V. It has a temperature range of -40 to 85°C and uses CMOS technology. The package style is small outline, thin profile, shrink pitch, making it suitable for industrial telecom applications.
MAX2769CETI+T
Maxim Integrated
TELECOM CIRCUIT; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
MT9041AP
Mitel Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
RN4870-V/RM140
Microchip Technology
RN4870-V/RM140 by Microchip Tech is a TS 16949-compliant IC with 33 terminals, operating at -20 to 70°C. It's a telecom circuit type with 3.3V supply voltage, supporting data rates up to 0.01 Mbps. Ideal for applications requiring surface mount, compact design in commercial temperature range.
STKNX
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
AD9832BRUZ-REEL7
AD9832BRUZ-REEL7 by Analog Devices is a Telecom Interface IC with 16 terminals. It operates b/w -40 to 85°C, consuming 5mA at 3.3V. This CMOS technology-based IC is ideal for telecom circuits due to its small outline and dual terminal position.
LBEE5KL1DX-883
Murata Manufacturing
Murata Manufacturing's LBEE5KL1DX-883 is a RECTANGULAR MICROELECTRONIC ASSEMBLY with 46 terminals. Operating from -30 to 70°C, it has a seated height of 1.1mm and nominal voltage of 3.6V. Ideal for TELECOM CIRCUITS, this Telecom Interface IC is surface mountable and suited for various telecom applications.
BMD-300-A-R-10
U-blox Ag
The U-blox Ag BMD-300-A-R-10 is a surface mount telecom IC with 47 terminals. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of 3V. With a data rate of 2 Mbps, it's ideal for applications requiring high-speed telecommunications functionality.
AD73311ARS-REEL
AD73311ARS-REEL by Analog Devices is a 16-bit linear coding telecom IC with 20 terminals in a small outline package. Operating b/w -40 to 85°C, it has a supply voltage of 3V and max gain tolerance of 1dB. Ideal for telecom circuits, this CMOS technology IC features a filter and tin lead terminal finish.
XBP9X-DMRS-001
Digi International
XBP9X-DMRS-001 by Digi Int. is a telecom IC with 37 terminals, operating temp -40 to 85°C, and data rate of 0.25 Mbps. It's a surface-mount rectangular package suitable for telecom circuit applications at 3.3V supply voltage.
CY7B933-JXI
CY7B933-JXI by Infineon Technologies is a telecom interface IC with 1 function and a data rate of 400 Mbps. It operates at a nominal voltage of 5V and has a max seated height of 4.572mm. This IC is commonly used in telecom circuits for various applications.
CL4490-1000-PRO
Laird Technologies
RF AND BASEBAND CIRCUIT;
ANNA-B112-00B
ANNA-B112-00B by U-blox Ag is a telecom IC with 52 terminals, operating at -40 to 85°C. It has a data rate of 2 Mbps and nominal voltage of 3V. This square-shaped, surface-mount package is ideal for industrial applications requiring high-speed telecom circuit functionality.
SI32170-C-GM1R
Silicon Labs
TELECOM CIRCUIT;
WL1837MODGIMOCT
Texas Instruments
WL1837MODGIMOCT by Texas Instruments is a telecom interface IC with 100 terminals in a rectangular grid array package. It operates at temperatures from -40 to 85°C, with a supply voltage of 3.7V and data rate of 100 Mbps. Ideal for industrial applications requiring high-speed communication in compact spaces.
SIM800F
Simcom Wireless Solutions
SIM800F by Simcom Wireless Solutions is a telecom IC with 0.0856 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and has 68 terminals in a square package. Ideal for telecom applications requiring high-speed data transmission in harsh environments.
HT12D(20SOP)
Holtek Semiconductor
HT12D(20SOP) by Holtek Semiconductor is a CMOS telecom IC with 20 terminals. It operates at -20 to 70°C, powered by 2.4/12V supplies. This small outline package is surface mountable and commonly used in telecom circuits for various applications.
SA602AD,602
NXP Semiconductors
SA602AD,602 by NXP Semiconductors is an 8-terminal telecom IC with a supply voltage of 6V. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package style. Ideal for telecom circuits, it features gull wing terminals and is surface mountable.
HMC980LP4ETR
Analog Devices' HMC980LP4ETR is a 24-terminal telecom IC with matte tin finish, operating b/w -40 to 85°C. It comes in a square chip carrier package style, suitable for industrial applications requiring a nominal voltage of 12V. The IC is surface mountable and has a terminal pitch of 0.5mm, making it ideal for telecom circuit designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
WT32I-A-AI61
WT32I-A-AI61IAP
WT32I-A-AI6IAP
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 50; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
WT32I-A-AI6-APTX
WT32I-A-AI6-APTX by Silicon Labs is a surface mount telecom interface IC with 1 function and 50 terminals. It has a rectangular package shape, measuring 23.9mm in length, 15.9mm in width, and 2.55mm in max seated height. With an operating temperature range of -40 to 85°C, it is suitable for industrial applications requiring reliable telecom circuit performance.
WT32I-A-AI6
WT32I-E-AI6
WT32I-E-AI6 by Silicon Labs is a surface mount telecom interface IC with 1 function. It has a rectangular package shape, 50 terminals, and a max seated height of 2.55 mm. This industrial-grade IC is suitable for telecom circuit applications.
WT32I-E-AI6IAP
Silicon Labs' WT32I-E-AI6IAP is a telecom IC with 50 terminals, operating from -40 to 85°C. Its compact rectangular package measures 15.9mm x 23.9mm with a low profile of 2.55mm, suitable for industrial applications requiring surface mount technology.
WT32I-A-AI61-APTX
WT32I-E-AI6-APTX
Silicon Labs' WT32I-E-AI6-APTX is a telecom IC with 50 terminals, operating from -40 to 85°C. Its compact rectangular package measures 15.9mm x 23.9mm with a seated height of 2.55mm, suitable for industrial applications requiring high temperature tolerance and small form factor.
WT32I-E-AI61-APTX
WT32I-E-AI61
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved