Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
Median Price
$10.654
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$11.660
100+ parts
$8.880
1k+ parts
$8.220
10k+ parts
$7.830
Verical
-
$9.647
Digiode
$10.574
Vyrian
$11.130
Nova Conductors
Ampacity Inc.
$9.460
Corphita
$10.017
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Other Function Telecom Interface ICs WFM200SS22XNA3R attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Telecom IC Type:
Maximum Time At Peak Reflow Temperature (s):
WFM200SS22XNA3R Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Alpha & Omega Semiconductor
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Bkc Semiconductors
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Surge Components
BGM11S22F256GA-V2
Silicon Labs
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4; Terminal Finish: NICKEL GOLD;
SIM900D
Simcom Wireless Solutions
SIM900D by Simcom Wireless Solutions is a telecom IC with 0.0856 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and has 48 terminals in a square package shape. Ideal for telecom applications requiring high-speed data transmission.
CYW43439KUBGT
Infineon Technologies
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 1;
WL1835MODGBMOCT
Texas Instruments' WL1835MODGBMOCT is a telecom IC with 100 terminals, operating at 3.7V and supporting data rates up to 100 Mbps. It features a rectangular package style, surface mount capability, and operates within -20 to 70°C temperature range. Ideal for telecom interface applications requiring high-speed data transmission in commercial-grade environments.
ESP32-WROVER(8MB)
Espressif Systems (shanghai)
ESP32-WROVER(8MB) by Espressif Systems is a telecom IC with 150 Mbps data rate, operating at -40 to 85°C. It has 38 terminals, measures 31.4x18mm, and requires 3.3V supply voltage. Ideal for industrial applications requiring high-speed data transmission in compact spaces.
AT86RF215IQ-ZU
Atmel
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: VQCCN; Package Shape: SQUARE;
RN4871-I/RM128
Microchip Technology
RN4871-I/RM128 by Microchip Technology is a telecom IC with 16 terminals, operating at -40 to 85 °C. It has a data rate of 0.01 Mbps and nominal voltage of 3.3 V. Ideal for industrial applications requiring reliable telecom circuit interfaces in compact spaces.
MGM240PA32VNA3
TELECOM CIRCUIT;
LMH0384SQX/NOPB
National Semiconductor
Other Telecom ICs; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE;
CC2541F256TRHATQ1
CC2541F256TRHATQ1 by Texas Instruments is a telecom IC with 40 terminals in a square chip carrier package. It operates b/w -40 to 105°C, supporting a data rate of 2 Mbps at 3V supply voltage. Ideal for telecom circuits, it has a compact size of 6x6mm and terminal pitch of 0.5mm for industrial applications.
TDK5110FHTMA1
Infineon's TDK5110FHTMA1 is a telecom IC with 10 terminals, operating at -40 to 125°C. It has a supply voltage of 3V and consumes 0.021mA current. This small outline IC in plastic package is ideal for automotive telecom applications.
CC2640R2FYFVT
CC2640R2FYFVT by Texas Instruments is a telecom IC with 34 terminals in a square grid array package. It operates b/w -40 to 85°C, with a supply voltage of 3V. With a very thin profile and fine pitch, it is ideal for industrial telecom applications requiring compact design and reliable performance.
TLE8457BSJXUMA1
TLE8457BSJXUMA1 by Infineon is a BICMOS technology telecom IC with 8 terminals in a small outline package. It operates at a nominal voltage of 8V and has a terminal pitch of 1.27mm. This AEC-Q100 screened IC is ideal for telecom circuit applications due to its compact size and gull wing terminal form.
RN4678-V/RM113
RN4678-V/RM113 by Microchip Tech is a surface mount telecom IC with 33 terminals in a rectangular package. Operating temp range from -20 to 70°C, nominal voltage of 1.9V. Ideal for telecom circuits due to its compact size and gold over nickel terminal finish.
CYBLE-416045-02
CYBLE-416045-02 by Infineon Technologies is a telecom IC with 43 terminals, operating at -40 to 85°C. It has a data rate of 8000 Mbps and operates at a nominal voltage of 3V. This surface-mount IC is ideal for industrial applications requiring high-speed telecommunications interfaces.
ATWILC1000-MR110UB
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Shape: RECTANGULAR; JESD-30 Code: R-XXMA-N28;
SN65DSI83ZQET
SN65DSI83ZQET by Texas Instruments is a telecom interface IC with 64 terminals in a square grid array package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It has a nominal voltage of 1.8V and terminal pitch of 0.5mm, ideal for telecom circuit applications.
NRF52840-QIAA
Nordic Semiconductor Asa
NRF52840-QIAA by Nordic Semiconductor Asa is a 73-terminal IC with 3V supply voltage, operating from -40 to 85°C. It features a grid array package style, suitable for industrial telecom circuits. With a 0.5mm terminal pitch and 0.85mm seated height, it offers high performance in compact applications.
CC2564MODACMOG
CC2564MODACMOG by Texas Instruments is a telecom IC with 35 terminals, operating at -30 to 85°C. It has a data rate of 4 Mbps and nominal voltage of 3.6V. This surface-mount IC in rectangular package shape is ideal for telecom applications requiring high-speed data transmission.
ODIN-W260-06B
U-blox Ag
Other Telecom ICs;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
WFM200S022XNA3R
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
WFM200S022XNA3
WFM200S022XNN3R
WFM200SS22XNA2
TELECOM CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 52; Package Code: LGA; Package Shape: SQUARE; Package Body Material: UNSPECIFIED;
WFM200S022XNN3
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
WFM200SS22XNN3
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
WFM200SS22XNA3
TELECOM CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40;
WFM200SS22XNN3R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved