Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8932B-IS by Silicon Labs is an isolation amplifier with a supply voltage of 5V, operating temperature range from -40 to 125°C, and max supply current of 5.7mA. It is used in applications requiring small outline packages, surface mount capability, and dual terminal positions for precise signal isolation.
Median Price
$4.948
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$5.972
100+ parts
$4.356
1k+ parts
$3.720
10k+ parts
$3.597
Chip1Stop
$5.062
-
Verical
$3.925
$3.513
$3.300
Rochester
$3.140
$2.810
$2.640
Digiode
$5.673
Nova Conductors
$7.351
Vyrian
GLYN GmbH & Co. KG
Ampacity Inc.
$5.080
Corphita
$5.375
Continental Prestige Electronics
$7.204
Argo Parts USA
Netroflash
$6.983
$6.836
The use of plastic/epoxy material makes the product lightweight and durable, suitable for various applications.
Being surface mountable allows for easy integration onto PCBs, saving space and simplifying assembly processes.
Operating at a nominal supply voltage of 5V makes this product efficient and compatible with many common power sources.
With a maximum supply voltage limit of 6V, the product offers protection against potential power surges, ensuring reliable performance.
The high maximum operating temperature of 125°C allows this product to function effectively in a wide range of environmental conditions.
The low minimum operating temperature of -40°C ensures reliable operation even in extreme cold environments.
The isolation amplifier design provides electrical isolation between input and output, preventing noise interference and ensuring accurate signal transmission.
Isolation Amplifiers SI8932B-IS attributes and parameters. Explore more Isolation Amplifiers devices from Silicon Labs
Amplifier Type:
Total Functions:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Package Body Material:
Surface Mount:
JESD-30 Code:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
SI8932B-IS Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Changzhou Starsea Electronics
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
ISO122JUE4
ISO122JUE4 by Texas Instruments is an isolation amplifier with 50 MHz bandwidth, 1500V isolation voltage, and 0.02% non-linearity. Ideal for applications requiring high precision signal amplification in compact spaces due to its small outline package and dual terminal position.
AMC1211AQDWVRQ1
AMC1211AQDWVRQ1 by Texas Instruments is an Isolation Amplifier with a 1500uV Max Input Offset Voltage, 275MHz Nominal Bandwidth, and 1414V Min Isolation Voltage. Ideal for automotive applications due to AEC-Q100 Screening Level, it features a small outline package style and operates in temperatures ranging from -40°C to 125°C.
HCPL-7800-500E
Agilent Technologies
ISOLATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ACNT-H79B-000E
Broadcom
ACNT-H79B-000E by Broadcom is an Isolation Amplifier with 8 terminals, Vsup of 5V, and max voltage gain of 8.24. Ideal for industrial applications, it operates b/w -40 to 105 °C, in a small outline package measuring 13.6mm x 6.248mm x 4.034mm, suitable for surface mount assembly.
AMC1211AQDWVQ1
The Texas Instruments AMC1211AQDWVQ1 is an Isolation Amplifier with a 1500 uV Max Input Offset Voltage and 275 MHz Nominal Bandwidth. Ideal for automotive applications, it offers a 3.3 V Nominal Voltage and operates in temperatures ranging from -40 to 125 °C.
ACPL-790B-000E
Broadcom's ACPL-790B-000E is an Isolation Amplifier with 5V nominal voltage, 200MHz bandwidth, and 18.5mA max supply current. It is ideal for industrial applications requiring high voltage gain and temperature resilience up to 105°C.
ISO122JP
ISO122JP by Texas Instruments is an isolation amplifier with 50 MHz bandwidth, 0.02% non-linearity, and 1500V isolation voltage. Ideal for applications requiring high precision signal amplification in environments with potential differences b/w input and output circuits.
AMC1300DWV
The Texas Instruments AMC1300DWV is an isolation amplifier with a 3.3V supply voltage, 230MHz bandwidth, and 1500V isolation voltage. Ideal for industrial applications requiring high precision measurements in harsh environments. With a compact rectangular package and surface-mount capability, it offers reliable performance in temperature ranges from -40 to 105°C.
ISO121G-BI
Burr-Brown Corporation
ISO121G-BI by Burr-Brown Corp is an Isolation Amplifier with 15V supply, 60MHz bandwidth, and 3500V isolation voltage. Ideal for military applications due to its MIL grade, -55 to 125 °C operating temp range, and ceramic-metal package body.
5962-9755701EYA
ISOLATION AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ISO120G
ISOLATION AMPLIFIER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
AMC1350DWV
AMC1350DWV by Texas Instruments is an isolation amplifier with a max input offset voltage of 1500 uV. It has a nominal voltage of 3.3 V and a max operating temperature of 125 °C. This amplifier is commonly used in applications requiring high isolation and accurate signal amplification.
PS8551L4-E3-AX
Renesas Electronics
SI8920BC-IPR
Silicon Labs
SI8920BC-IPR by Silicon Labs is an isolation amplifier with a 5V nominal voltage, 8 terminals, and 125°C max operating temp. It is used for applications requiring isolation amplification in compact spaces due to its small form factor and surface-mount capability.
HCPL-7851#300
ISOLATION AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AMC3330DWER
The Texas Instruments AMC3330DWER is an isolation amplifier with a 200uV max input offset voltage and 0.075% max non-linearity. Ideal for automotive applications, it operates at -40 to 125 °C with a 3.3V nominal voltage. With a min isolation voltage of 1200V, it features a small outline package style and Gull Wing terminal form.
PAMC3302DWER
PAMC3302DWER by Texas Instruments is an Isolation Amplifier with a supply voltage of 3.3V, non-linearity of 0.03%, and isolation voltage of 4250V. Ideal for automotive applications due to its small outline package style and wide operating temperature range from -40°C to 125°C.
ACPL-C78A-000E
ACPL-C78A-000E by Broadcom is an Isolation Amplifier with 100 MHz bandwidth, 8 terminals, and 5V nominal voltage. Widely used in industrial applications for signal isolation and amplification due to its small outline package and high common mode voltage limit of 2.8V.
AMC1311BQDWVRQ1
AMC1311BQDWVRQ1 by Texas Instruments is an Isolation Amplifier with a 3.3V supply voltage, 275 MHz bandwidth, and 0.04% max non-linearity. Ideal for automotive applications due to its AEC-Q100 screening level and high isolation voltage of 2121V. Package style is small outline with dual terminals in a rectangular shape, suitable for surface mount assembly.
HCPL-7825OPTION300
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8920AC-IS
Skyworks Solutions
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8920AC-IS by Silicon Labs is a 16-terminal isolation amplifier with a nominal voltage of 5V. It features a max operating temperature of 125°C and common mode voltage of 1V, making it ideal for applications requiring precise signal isolation in compact spaces. With surface mount capability and small outline package style, this amplifier offers reliable performance in various electronic systems.
SI8920BC-IP
SI8920BC-IP by Silicon Labs is an Isolation Amplifier with 8 terminals, 5V supply voltage, and 125°C max operating temp. Ideal for applications requiring isolation amplification in compact designs due to its small form factor and surface-mount capability.
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8932D-IS4
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 7.49 mm;
SI8932D-IS4 by Silicon Labs is an isolation amplifier with a nominal voltage of 5V and max supply current of 5.7mA. It features a small outline package style, gull wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise signal isolation in compact electronic designs.
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
SI8920AC-IP
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Common Mode Voltage: 1 V;
SI8920BC-IS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Width: 7.5 mm;
SI8932B-IS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
SI8931B-IS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 4.9 mm;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
SI8920BC-ISR
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
SI8931B-AS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8921AD-IS4
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved