Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8931D-AS4 by Silicon Labs is an Isolation Amplifier with 5V supply, 8 terminals, and 125°C max temp. Ideal for applications requiring isolation amplification in compact designs due to its small outline package and surface-mount capability.
Median Price
$7.209
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$5.000
1k+ parts
$4.692
10k+ parts
-
Verical
DigiKey
$7.920
$5.250
$4.785
$4.683
Mouser Electronics
$5.050
$4.780
$4.670
Richardson RFPD
Nova Conductors
$6.083
Digiode
$7.534
Vyrian
Corohmni
$1.651
Aranea Global
$5.962
$5.723
Continental Prestige Electronics
Aztec Data Supply Inc.
$6.560
Ampacity Inc.
$6.740
Corphita
$7.137
AZTECH Wire
$16.860
QUARKTWIN TECHNOLOGY LTD
Futuretech Components
Microchip USA
Argo Parts USA
The use of plastic/epoxy material makes the product lightweight and durable, ideal for applications where weight and durability are important factors.
Being surface mountable, this product offers easy installation and saves space on the PCB.
With a nominal supply voltage of 5V, this product is compatible with a wide range of systems and applications.
The high maximum operating temperature of 125°C ensures reliable performance even in harsh environments with elevated temperatures.
Being an isolation amplifier, this product provides electrical isolation between input and output, making it suitable for applications requiring high levels of isolation and noise immunity.
Isolation Amplifiers SI8931D-AS4 attributes and parameters. Explore more Isolation Amplifiers devices from Silicon Labs
Amplifier Type:
Total Functions:
Maximum Common Mode Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Package Body Material:
Surface Mount:
JESD-30 Code:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
SI8931D-AS4 Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Components
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
C1206C104K5RACTU
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
AD293B
Analog Devices
AD293B by Analog Devices is an Isolation Amplifier with 20 terminals, operating temperature range of -40 to 100°C. It features BIPOLAR technology, TIN LEAD finish, and CERAMIC package suitable for INDUSTRIAL applications.
AMC1351DWVR
Texas Instruments
The Texas Instruments AMC1351DWVR is an isolation amplifier with 1500 uV max input offset voltage and 0.01% max non-linearity. It operates at -40 to 125 °C, has a 3.3 V nominal voltage, and offers 1500 V min isolation voltage. Ideal for applications requiring precise signal amplification in compact spaces.
TLP7820(D4ATP4,E
Toshiba
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Voltage Gain: 8.12;
ISO120G-BI
ISO120G-BI by Texas Instruments is an Isolation Amplifier with 60 MHz bandwidth, 1500 V isolation voltage, and +-15 V power supplies. It is ideal for applications requiring high common mode voltage tolerance and operates in temperatures ranging from -25 to 85 °C.
HCPL-7800A-E
Broadcom
ISOLATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
HCPL-788J-E
ISOLATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ADUM4195-1WBRIZ-R7
ISOLATION AMPLIFIER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
ADUM4190TRIZ-EP
ADUM4190TRIZ-EP by Analog Devices is an Isolation Amplifier with 16 terminals, Vsup of 5V, and bandwidth of 400MHz. Ideal for military applications due to its MILITARY grade and high common mode voltage limit of 1.5V.
HCPL-7850300
Hewlett Packard
HCPL-7850300 by Hewlett Packard is an Isolation Amplifier with 8 terminals, operating at -55 to 125 °C. It has a voltage gain range of 7.6 to 8.4 and bandwidth of 100 MHz, suitable for military-grade applications requiring hybrid technology in a rectangular plastic/epoxy package.
PS8352AL2-E3
Renesas Electronics
ISOLATION AMPLIFIER;
AD295C
AD295C by Analog Devices is an Isolation Amplifier with 15V supply, 1000 max voltage gain, and 0.6 MHz bandwidth. Ideal for industrial applications requiring high common mode voltage tolerance up to 1767.767 V and a temperature range of -40 to 100°C.
AMC1200BDUBR
The Texas Instruments AMC1200BDUBR is an Isolation Amplifier with 1500uV Max Input Offset Voltage, 0.075% Max Non Linearity, and 800V Min Isolation Voltage. Ideal for industrial applications requiring a small outline package with a bandwidth of 0.1MHz and dual terminal position.
SI8932B-AS
Skyworks Solutions
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Width: 3.9 mm;
HCPL-7800A#500
ISOLATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
HCPL-7800
HCPL-7800 by Broadcom is an Isolation Amplifier with 8 terminals, a voltage gain range of 7.76 to 8.24, and a bandwidth of 100 MHz. It is commonly used in industrial applications for isolating signals and maintaining accuracy in high-voltage environments up to 3750 V.
PS8352AL2-AX
5962-9755701HXX
ISOLATION AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
HCPL-7840-500E
Broadcom's HCPL-7840-500E is an Isolation Amplifier with a 100 MHz bandwidth, 3750 V isolation voltage, and 8.4 max voltage gain. Ideal for industrial applications requiring high common mode voltage tolerance and small outline package style.
HCPL-7800A-500E
Agilent Technologies
HCPL-7800-500E
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8920AC-IS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
Silicon Labs
SI8920AC-IS by Silicon Labs is a 16-terminal isolation amplifier with a nominal voltage of 5V. It features a max operating temperature of 125°C and common mode voltage of 1V, making it ideal for applications requiring precise signal isolation in compact spaces. With surface mount capability and small outline package style, this amplifier offers reliable performance in various electronic systems.
SI8920BC-IP
SI8920BC-IP by Silicon Labs is an Isolation Amplifier with 8 terminals, 5V supply voltage, and 125°C max operating temp. Ideal for applications requiring isolation amplification in compact designs due to its small form factor and surface-mount capability.
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8932D-IS4
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 7.49 mm;
SI8932D-IS4 by Silicon Labs is an isolation amplifier with a nominal voltage of 5V and max supply current of 5.7mA. It features a small outline package style, gull wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise signal isolation in compact electronic designs.
SI8920BC-IPR
SI8920BC-IPR by Silicon Labs is an isolation amplifier with a 5V nominal voltage, 8 terminals, and 125°C max operating temp. It is used for applications requiring isolation amplification in compact spaces due to its small form factor and surface-mount capability.
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
SI8920AC-IP
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Common Mode Voltage: 1 V;
SI8920BC-IS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Width: 7.5 mm;
SI8932B-IS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Voltage Limit: 6 V;
SI8931B-IS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 4.9 mm;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
SI8920BC-ISR
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
SI8931B-AS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved