Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8920BC-IP by Silicon Labs is an Isolation Amplifier with 8 terminals, 5V supply voltage, and 125°C max operating temp. Ideal for applications requiring isolation amplification in compact designs due to its small form factor and surface-mount capability.
Median Price
$4.540
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$4.900
$3.000
$2.990
DigiKey
$5.940
$3.819
$3.436
$3.341
Arrow
$4.082
Verical
RS (Exports)
$6.100
$5.958
Richardson RFPD
$3.630
Nova Conductors
$3.525
Digiode
$4.313
TME
$6.230
$5.270
Semtec, LLC
Vyrian
Goldney Electronics S.L.
Ampacity Inc.
$2.930
Semicontronic
$2.857
$2.842
Netroflash
$3.455
Corphita
$4.086
Aztec Data Supply Inc.
$4.921
Corohmni
$6.473
Advanced Electronics
$15.974
$15.176
Microchip USA
$30.300
$30.120
$30.020
$29.930
QUARKTWIN TECHNOLOGY LTD
Lixinc
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
The use of plastic/epoxy material makes the product lightweight and durable, ensuring longevity and easy handling.
Being surface mountable allows for easy installation on PCBs, saving space and simplifying assembly.
Suitable for a wide range of applications requiring a 5V supply, making it versatile.
Can operate effectively in high-temperature environments, ensuring performance stability.
Provides effective noise rejection and isolation from unwanted signals.
Can withstand very low temperatures, making it suitable for a variety of industrial settings.
Low profile design allows for easy integration into compact spaces.
Designed specifically for isolation applications, ensuring accurate and reliable signal transmission.
Isolation Amplifiers SI8920BC-IP attributes and parameters. Explore more Isolation Amplifiers devices from Silicon Labs
Amplifier Type:
Total Functions:
Maximum Common Mode Voltage:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Package Body Material:
Surface Mount:
JESD-30 Code:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
SI8920BC-IP Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
Transistor & Electronic
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104K5RACTU
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
HCPL-7800#300
Broadcom
Broadcom's HCPL-7800#300 is an Isolation Amplifier with 5V nominal voltage, 100MHz bandwidth, and 3750V min isolation voltage. It is used in industrial applications for signal amplification and isolation in a compact rectangular package suitable for surface mount assembly.
HCPL-7840-560E
Agilent Technologies
ISOLATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ISO122U/1K
Texas Instruments
ISO122U/1K by Texas Instruments is a 28-terminal isolation amplifier with 50 MHz bandwidth, 1500V isolation voltage, and 0.02% non-linearity. Ideal for applications requiring high precision signal amplification in harsh environments.
ACPL-782T-000E
Broadcom's ACPL-782T-000E is an Isolation Amplifier with 5V supply, 100MHz bandwidth, and 3750V isolation voltage. Ideal for automotive applications due to AEC-Q100 screening and -40 to 125 °C operating temperature range. Package: PLASTIC/EPOXY, RECTANGULAR shape, 8 terminals in IN-LINE style.
ADUM3190WSRQZ-RL7
Analog Devices
ADUM3190WSRQZ-RL7 by Analog Devices is an Isolation Amplifier with 16 terminals, operating at -40 to 125 °C. It has a voltage gain range of 0.83 to 1.17 and bandwidth of 200 MHz, suitable for automotive applications due to AEC-Q100 screening level.
AMC3301QDWERQ1
AMC3301QDWERQ1 by Texas Instruments is an Isolation Amplifier with 150uV Max Input Offset Voltage, 0.04% Max Non Linearity, and 1200V Min Isolation Voltage. Ideal for automotive applications due to AEC-Q100 screening level, it operates at -40 to 125 °C with a Vsup of 3.3V.
5962-9755701EPX
ISOLATION AMPLIFIER; Qualification: Qualified;
AD204JN
AD204JN by Analog Devices is an Isolation Amplifier with 15V supply, 10 terminals, and 5MHz bandwidth. Ideal for industrial applications requiring a max common mode voltage of 707.1135V and min isolation voltage of 750V. Operates in temperatures ranging from -40 to 85 °C.
ISO113BH
ISO113BH by Texas Instruments is an Isolation Amplifier with 15V supply voltage, 20MHz bandwidth, and 1500V isolation voltage. It is used in applications requiring high common mode voltage tolerance up to 1500V, such as industrial automation and power systems.
HCPL-7800B#300
HCPL7825#500
HCPL-7800A
Hewlett Packard
ISOLATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AD204KY
AD204KY by Analog Devices is an Isolation Amplifier with 15V supply, 5MHz bandwidth, and 1500V isolation voltage. Ideal for industrial applications requiring high common mode voltage tolerance and wide temperature range. Features include a rectangular package shape, zig-zag terminal position, and through-hole technology.
ADUM3190WSRQZ
ADUM3190WSRQZ by Analog Devices is an Isolation Amplifier with 16 terminals, 5V nominal voltage, and 200MHz bandwidth. Ideal for automotive applications due to AEC-Q100 screening level, -40 to 125 °C operating temperature range, and small outline package style.
ACPL-782T
ISOLATION AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ISO106B
ISO106B by Texas Instruments is an Isolation Amplifier with 70 MHz bandwidth, 15V nominal voltage, and 3500V isolation voltage. Ideal for military applications due to its MILITARY temperature grade and high common mode voltage of 3500V. Package style is IN-LINE with a rectangular shape and through-hole terminal form.
PS8352AL2-AX
Renesas Electronics
ISO122JP
Burr-Brown Corporation
ISOLATION AMPLIFIER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
AMC1200STDUBRQ1
AMC1200STDUBRQ1 by Texas Instruments is an Isolation Amplifier with 1500uV Max Input Offset Voltage, 0.075% Max Non Linearity, and 800V Min Isolation Voltage. Ideal for industrial applications requiring a small outline package, it operates b/w -40 to 105°C with a bandwidth of 0.1MHz.
ISO107
ISO107 by Texas Instruments is an Isolation Amplifier with 16 terminals, 20 MHz bandwidth, and 2500V isolation voltage. It has a rectangular package shape made of ceramic and metal-sealed cofired material. Ideal for applications requiring high common mode voltage tolerance and reliable signal isolation in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8920AC-IS
Skyworks Solutions
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
Silicon Labs
SI8920AC-IS by Silicon Labs is a 16-terminal isolation amplifier with a nominal voltage of 5V. It features a max operating temperature of 125°C and common mode voltage of 1V, making it ideal for applications requiring precise signal isolation in compact spaces. With surface mount capability and small outline package style, this amplifier offers reliable performance in various electronic systems.
SI8920BC-IP
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8932D-IS4
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 7.49 mm;
SI8932D-IS4 by Silicon Labs is an isolation amplifier with a nominal voltage of 5V and max supply current of 5.7mA. It features a small outline package style, gull wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise signal isolation in compact electronic designs.
SI8920BC-IPR
SI8920BC-IPR by Silicon Labs is an isolation amplifier with a 5V nominal voltage, 8 terminals, and 125°C max operating temp. It is used for applications requiring isolation amplification in compact spaces due to its small form factor and surface-mount capability.
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
SI8920AC-IP
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Common Mode Voltage: 1 V;
SI8920BC-IS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Width: 7.5 mm;
SI8932B-IS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Supply Voltage Limit: 6 V;
SI8931B-IS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 4.9 mm;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
SI8920BC-ISR
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
SI8931B-AS
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8920BC-AP
ISOLATION AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Package Style (Meter): IN-LINE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved