Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8640BC-B-IS1 by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375-5.5V, and temp range of -40 to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
Median Price
$2.950
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Symmetry
1+ parts
$2.790
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
Newark
$3.280
$2.820
Mouser Electronics
$3.940
$2.410
$2.260
$2.150
DigiKey
$2.599
$2.264
$2.139
Arrow
$2.248
$2.121
$1.969
Verical
Rochester
$1.960
$1.750
$1.650
RS (Exports)
$3.666
Digiode
$2.384
Nova Conductors
$2.934
Vyrian
LWI Electronics Inc
Kiltronic GmbH
Semicontronic
$1.880
$1.833
$1.824
Ampacity Inc.
$2.130
Corphita
$2.259
Argo Parts USA
Netroflash
$2.875
Corohmni
$3.318
Continental Prestige Electronics
$3.540
Aztec Data Supply Inc.
$6.137
Advanced Electronics
$7.327
$6.961
QUARKTWIN TECHNOLOGY LTD
Lixinc
Metaverse IC Inc.
Perfect Parts
Authorized Procurement Solutions
S.R.D Solutions
The use of plastic/epoxy material ensures durability and resistance to external factors, making this product suitable for various applications and environments.
Being surface mountable makes installation easier and saves space on the PCB, allowing for efficient design layouts.
The high maximum supply voltage tolerance provides flexibility in power supply options and prevents damage from voltage spikes.
With multiple functions in one IC, this product offers cost-effectiveness and space-saving benefits in circuit design.
The rectangular package shape allows for efficient use of board space and easy placement in the circuit layout.
Having 16 terminals provides connectivity options and compatibility with various circuit configurations.
The small outline package style saves space and allows for compact designs without compromising on functionality.
The low minimum supply voltage requirement makes this product suitable for low-power applications and helps in maximizing energy efficiency.
With a high maximum operating temperature, this product can withstand harsh environments and maintain stable performance under varying temperature conditions.
The wide temperature range ensures reliable operation in extreme temperature conditions, making this product suitable for a range of industrial applications.
The dual terminal position provides flexibility in PCB layout and allows for easy routing of connections for efficient circuit design.
The low maximum seated height enables low-profile designs and compact assemblies in space-constrained applications.
The compact width of 3.9 mm allows for efficient use of board space and easy integration into various circuit layouts.
With a high peak reflow temperature, this product can withstand reflow soldering processes without damage, ensuring reliable solder joints.
The length of 9.9 mm provides a compact form factor, making this product suitable for applications where space is limited.
The CMOS technology offers low power consumption, high speed, and compatibility with various digital systems, making this product efficient and versatile.
The gull wing terminal form allows for easy assembly and soldering, ensuring reliable connections and ease of installation.
The nominal supply voltage of 5V provides compatibility with standard power sources, making integration into existing systems easier.
The small terminal pitch of 1.27 mm allows for high-density mounting and efficient use of board space in compact designs.
As a digital isolator, this product offers electrical isolation between input and output, preventing signal interference and ensuring reliable communication in noisy environments.
Other Function Interface ICs SI8640BC-B-IS1 attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Additional Features:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI8640BC-B-IS1 Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
SI8661BB-B-IS1
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
MAX3646ETG+
Analog Devices
MAX3646ETG+ by Analog Devices is a 24-terminal interface IC with a supply voltage range of 2.97V to 3.63V, operating temperature from -40°C to 85°C, and peak reflow temperature of 260°C. It features a square package style and is suitable for industrial applications requiring very thin profile chips with no-lead terminal form.
ADUM3210TRZ-RL7
ADUM3210TRZ-RL7 by Analog Devices is a digital isolator with 8 terminals, operating voltage range of 3V to 5.5V, and temperature range from -40°C to 125°C. It is used in applications requiring high-speed data isolation in compact designs due to its small outline package style and CMOS technology.
PCA9306AMUTCG
PCA9306AMUTCG by Onsemi is an 8-terminal interface IC in a square chip carrier package. It operates b/w -55 to 125°C, with peak reflow temperature of 260°C for military-grade applications. With nickel gold palladium finish, it's ideal for various function interface circuits.
ADUM6402CRWZ-RL
ADUM6402CRWZ-RL by Analog Devices is a digital isolator with 16 terminals, operating at -40 to 105°C. It has a supply voltage range of 3-5.5V and comes in a small outline package suitable for industrial applications. The IC features dual terminal position, matte tin finish, and gull wing form factor for surface mount assembly.
SI8660BB-B-IS1R
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 1;
MAX3869EHJ+
Maxim Integrated
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: HTFQFP; Package Shape: SQUARE;
CY8CMBR3108-LQXIT
Infineon Technologies
CY8CMBR3108-LQXIT by Infineon operates at 1.8-5.5V with a temp range of -40 to 85°C. It's a CMOS interface IC with 16 terminals in a square package, suitable for industrial applications requiring precise touch sensing capabilities. The chip carrier design ensures a low profile and easy surface mounting, making it ideal for compact electronic devices.
ISOUSB211DPR
ISOUSB211DPR by Texas Instruments is a small outline interface IC with 28 terminals. It operates b/w -40 to 125°C and has a supply voltage range of 1.71-1.94V. Ideal for applications requiring dual terminal positions and surface mount compatibility.
ADUM1100ARZ-RL7
ADUM1100ARZ-RL7 by Analog Devices is an 8-terminal IC with a supply voltage range of 3V to 5.5V, operating from -40°C to 105°C. It features a small outline package suitable for industrial applications requiring interface circuitry in compact spaces.
ISO7240MDWR
ISO7240MDWR by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and 3.3V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has a small outline package style for surface mount applications. With nickel palladium gold terminal finish, it's ideal for various function interface IC applications.
PCA9517DP,118
NXP Semiconductors
PCA9517DP,118 by NXP Semiconductors is a voltage level translator IC with 8 terminals and supply voltages of 3/3.3V. It operates b/w -40 to 85°C, suitable for industrial applications. The small outline package has a max seated height of 1.1mm, making it ideal for space-constrained designs.
TXS0104ERGYR
TXS0104ERGYR by Texas Instruments is a 4-bit interface IC with max supply voltage of 3.6V and operating temp range of -40 to 85 °C. It's used in industrial applications, featuring surface mount package style and quad terminal position for versatile integration.
ISO7742FQDBQRQ1
ISO7742FQDBQRQ1 by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -40 to 125 °C. It has a CMOS technology and is AEC-Q100 compliant for automotive applications. The package style is small outline, shrink pitch, with nickel/palladium/gold terminal finish.
ISO7240CDWRG4
ISO7240CDWRG4 by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and 3.3V nominal voltage. It operates in automotive temperature grade range (-40 to 125 °C) and has a small outline package style for surface mount applications. The IC features dual terminal position with nickel/palladium/gold finish, making it suitable for various interface functions.
ISO1640QDWRQ1
Texas Instruments' ISO1640QDWRQ1 is an AEC-Q100 compliant interface IC with 2 functions, suitable for automotive applications. It operates b/w -40 to 125 °C with a supply voltage range of 2.25-5.5 V, featuring a small outline package style and dual terminal position.
PCA9306DCTRG4
PCA9306DCTRG4 by Texas Instruments is a 2-function interface IC with max supply voltage of 5.5V and min operating temp of -40°C. Ideal for industrial applications, it features a small outline package style and nickel/palladium/gold terminal finish, making it suitable for various electronic devices.
ISO7762DBQR
ISO7762DBQR by Texas Instruments is a 16-terminal IC with 6 functions, operating b/w -55 to 125 °C. It features a supply voltage range of 2.25-5.5 V and uses CMOS technology for military-grade applications requiring interface circuitry in compact spaces.
ADUM5403CRWZ
ADUM5403CRWZ by Analog Devices is a small outline interface IC with 16 terminals. It operates at a supply voltage range of 3V to 5.5V and has an industrial temperature grade of -40°C to +105°C. This IC is commonly used in various applications requiring reliable signal isolation.
ADUM6403CRWZ
ADUM6403CRWZ by Analog Devices is a 16-terminal digital isolator with a supply voltage range of 3V to 5.5V and operating temperature from -40°C to 105°C. It features a small outline package style, matte tin terminal finish, and gull wing terminal form. Ideal for industrial applications requiring high temperature tolerance and electrical isolation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8641BB-B-IS1R
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
Silicon Labs
SI8641BB-B-IS1R by Silicon Labs is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125°C, with supply voltage ranging from 2.375V to 5.5V. Ideal for applications requiring small outline packages and surface mount technology.
SI8641BB-B-IS1
SI8641BB-B-IS1 by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
SI8642ED-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
SI8621BB-B-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
SI8621BB-B-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8621AB-B-ISR
SI8621AB-B-ISR by Silicon Labs is a digital isolator with 8 terminals, operating voltage range of 2.5V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, GULL WING terminal form, and small outline package style suitable for surface mount assembly in various electronic systems. With an extended temperature range from -40°C to 125°C, it offers reliable isolation in harsh environments.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 2.5 V;
SI8620BB-B-ISR
SI8641BD-B-ISR
SI8641BD-B-ISR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and dual terminal position. It is used in applications requiring small outline package style, CMOS technology, and temperature range from -40°C to 125°C.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 4;
SI8631BD-B-IS
SI8631BD-B-IS by Silicon Labs is a 16-terminal digital isolator with 2.5-5.5V supply voltage range, AEC-Q100 screening for automotive applications, and -40 to 125°C operating temperature. It features a small outline package style, CMOS technology, and gull wing terminal form suitable for various interface applications.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8641BA-B-IUR
SI8641BA-B-IUR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for various applications requiring interface isolation and signal transmission in electronic systems.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
SI8641BA-B-IU
SI8641BA-B-IU by Silicon Labs is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package suitable for surface mount applications. Ideal for systems requiring high-speed signal isolation in compact spaces.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Package Equivalence Code: SSOP16,.25;
Silicon Labs SI8661BB-B-IS1 is a 16-terminal digital isolator with 2.375V to 5.5V supply range, AEC-Q100 screening for automotive applications, and -40°C to 125°C operating temperature. It features CMOS technology, GULL WING terminals, and small outline package ideal for various function interface ICs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved