Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAGNETIC FIELD SENSOR,HALL EFFECT;
Median Price
$1.445
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$1.040
100+ parts
$0.789
1k+ parts
$0.767
10k+ parts
-
Mouser Electronics
$1.530
$0.961
$0.857
$0.784
Chip1Stop
$1.720
Farnell
$2.180
$1.030
$0.741
$0.726
Element14
$3.490
$1.660
$1.190
$1.090
DigiKey
$0.990
Newark
$1.360
$1.230
$1.180
RS (Exports)
$0.499
Verical
Digiode
$0.988
Vyrian
VRG Components
Nova Conductors
Ampacity Inc.
$0.880
Semicontronic
$0.858
$0.854
Advanced Electronics
$0.893
Corohmni
Corphita
$0.936
Continental Prestige Electronics
$1.830
$0.909
$0.702
RC Electronics
Authorized Procurement Solutions
Argo Parts USA
Aranea Global
Magnetic Field Sensors SI7211-B-00-IVR attributes and parameters. Explore more Magnetic Field Sensors devices from Silicon Labs
Sensors or Transducers Type:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
General Diode
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
DRV5032FDLPGM
Texas Instruments
DRV5032FDLPGM by Texas Instruments is a magnetic field sensor with 5.5V max supply voltage, 1.5mT hysteresis, and -40 to 85°C operating temperature range. Ideal for applications requiring digital current output in a compact rectangular package, such as proximity sensing and position detection in various electronic devices.
TLE4953CBAMA1
Infineon Technologies
Infineon's TLE4953CBAMA1 is a magnetic field sensor with 4.5-20V supply voltage range, -500mT to 500mT magnetic field range, and 16.8mA max operating current. It features a digital current output interface, through-hole mounting, and is ideal for Hall effect applications in automotive and industrial sectors.
RR121-1B93-312
Coto Technology
RR121-1B93-312 by Coto Technology is a magnetic field sensor with 3.6V max supply voltage, 1mT hysteresis, and 0.30-2.70V digital output range. Ideal for applications requiring precise magnetic field detection in compact spaces with temperatures ranging from -40 to 125°C.
HMC1021S
Honeywell
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.899 inch; Body Length/Diameter: 4.8895 mm;
ACS718KMATR-20B-T
Allegro MicroSystems
Allegro MicroSystems' ACS718KMATR-20B-T is a magnetic field sensor with 16 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. Ideal for applications requiring precise Hall effect sensing in temperatures ranging from -40°C to 125°C.
HMC1021Z
Honeywell Sensing And Control
Honeywell Sensing And Control's HMC1021Z is a magnetic field sensor with 8 terminals, operating b/w -40 to 125°C. It has a supply voltage range of 2-12V and can detect magnetic fields from -0.6mT to 0.6mT. Ideal for applications requiring precise magnetoresistive sensing in a compact rectangular package.
DRV5032FCDBZT
Texas Instruments' DRV5032FCDBZT is a magnetic field sensor with 1.5 mT hysteresis, operating from -40 to 85 °C. It features a digital current output range of -5.0-5.0mA and UNIPOLAR input mode, suitable for applications requiring precise magnetic field detection in compact designs.
DRV5056A2QDBZR
Texas Instruments' DRV5056A2QDBZR is a Hall effect magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and 39mT min magnetic field range. Ideal for applications requiring analog voltage output, such as automotive sensors and industrial automation systems.
ACS70310LKTATN-001B5-C
Allegro MicroSystems' ACS70310LKTATN-001B5-C is a magnetic field sensor with 4.5-5.5V supply voltage range, AEC-Q100 screening level, and 1mV/G sensitivity. Ideal for automotive applications due to its -40 to 150°C operating temperature range and push-pull analog voltage output interface.
DRV5053VAQLPGMQ1
DRV5053VAQLPGMQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.7V to 38V and operating temperatures from -40°C to 125°C. It offers a current output range of 0-2.3mA, making it ideal for automotive applications requiring precise magnetic field sensing in harsh environments compliant with AEC-Q100 standards.
A1308LLHLT-2-T
Allegro MicroSystems' A1308LLHLT-2-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 11.5mA max current. Ideal for applications requiring analog voltage output in compact surface-mount design.
SS94A2
SS94A2 by Honeywell is a magnetic field sensor with a max supply voltage of 12.6V and output range of 3.96-4.04V, ideal for applications requiring sensitivity to magnetic fields such as automotive or industrial systems. With a body width of 1.8 inch and height of 15.2 mm, it offers single-ended analog voltage output and operates in temperatures ranging from -40 to 125 °C.
SS413A
SS413A by Honeywell is a magnetic field sensor with 1.5 mT hysteresis, 30 V max supply voltage, and -55 to 160°C operating temperature range. It's used for detecting bipolar magnetic fields in various applications like automotive, industrial control systems, and robotics due to its through-hole mounting feature and open-collector output type.
BD7411G-TR
ROHM
ROHM's BD7411G-TR is a Hall effect magnetic field sensor with 5V supply, 0.4mT hysteresis, and 1A output current. It operates b/w -40 to 85°C, suitable for applications requiring precise voltage output in a compact rectangular package ideal for surface mount installations.
VF360NT
The Honeywell Sensing And Control VF360NT is a magnetic field sensor with a supply voltage range of 3-24V. It operates in temperatures from -40 to 150°C, with a max output current of 20A. Ideal for applications requiring digital current output and detection of magnetic fields up to ±4.5mT.
BU52097GWZ-E2
ROHM's BU52097GWZ-E2 is a magnetic field sensor with 4 terminals, digital output, and hysteresis of 0.9 mT. Operating b/w -40 to 85°C, it has a max supply voltage of 3.6V and min of 1.65V. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small square package shape and surface mounting feature.
TLE49613MXTSA1
TLE49613MXTSA1 by Infineon is a magnetic field sensor with 3-32V supply, 15mT hysteresis, and AEC-Q100 screening. It features a current output of 0-25mA, latched bipolar input mode, and -10.4 to +10.4 mT magnetic field range. Ideal for automotive applications requiring precise magnetic field detection in compact designs.
55075-00-05-A
Hamlin Electronics Europe
MAGNETIC FIELD SENSOR,HALL EFFECT; Output Type: DIGITAL CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 20mA; Maximum Supply Voltage: 25.2 V; Minimum Operating Temperature: -40 Cel;
TLE493DA2B6HTSA1
MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: TIN; JESD-609 Code: e3;
HMC5883L-T
Honeywell's HMC5883L-T is a magnetic field sensor with 0.1% linearity, operating b/w -30°C to 85°C. It has a max supply voltage of 3.6V and measures magnetic fields from -0.8mT to 0.8mT. Ideal for surface mount applications requiring precise magnetoresistive sensing using I2C interface.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI7212-B-00-IVR
Silicon Labs
MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
SI7211-B-00-IV
SI7211-B-00-IB
SI7217-B-01-IV
SI7217-B-01-IVR
MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
SI7212-B-00-IV
SI7213-B-00-IVR
SI7213-B-00-IV
SI7214-B-00-IVR
SI7214-B-00-IV
SI7215-B-00-IVR
SI7215-B-00-IV
SI7216-B-00-IVR
SI7216-B-00-IV
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved