Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAGNETIC FIELD SENSOR,HALL EFFECT;
Median Price
$0.740
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
$0.703
Vyrian
Corphita
$0.666
Perfect Parts
Magnetic Field Sensors SI7216-B-00-IVR attributes and parameters. Explore more Magnetic Field Sensors devices from Silicon Labs
Sensors or Transducers Type:
PCN Obsolescence/ EOL - Si72xx 24/Mar/2020
PCN Design/Specification - SI72yy Datasheet Rev 26/Mar/2019 Si721y Datasheet Rev 30/Oct/2018
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
Hy Electronic
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Yangzhou Yangjie Electronics
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
KYOCERA AVX
A1469LK-T
Allegro MicroSystems
Allegro MicroSystems' A1469LK-T is a Hall effect magnetic field sensor with 4-26.5V supply voltage range, -40 to 150°C operating temperature, and 30-85mA current output. Ideal for applications requiring precise magnetic field detection in a compact rectangular package with through-hole mounting.
A1325LLHLT-T
Allegro MicroSystems' A1325LLHLT-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 9mA max current. Ideal for applications requiring Hall effect sensors like automotive systems, industrial controls, and consumer electronics due to its compact rectangular design and analog voltage output.
TLI49632MXTSA1
Infineon Technologies
TLI49632MXTSA1 by Infineon is a magnetic field sensor with 5.5V max supply voltage, 10mT hysteresis, and -40 to 125°C operating temp range. Ideal for current output applications like automotive, industrial control systems, and robotics due to its compact size and high sensitivity.
A1193LUA-T
Allegro MicroSystems A1193LUA-T is a magnetic field sensor with 3mT hysteresis, 24V max supply voltage, and 1mT min magnetic field range. Ideal for applications requiring precise analog current output in temperature ranges from -40 to 150°C.
SS495A
Honeywell Sensing And Control
SS495A by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 1.57" body width, and 3mm body height. It features a transistor output circuit type and operates in temperatures from -40°C to 150°C. Ideal for applications requiring precise sensing of magnetic fields with high linearity and sensitivity of 3.125mV/G.
DRV5032FBDBZT
Texas Instruments
DRV5032FBDBZT by Texas Instruments is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range of -40 to 85°C, and output current up to 5A. Ideal for applications requiring precise detection of magnetic fields in a compact rectangular package.
APS11700LLHALT-0SL
APS11700LLHALT-0SL by Allegro MicroSystems is a magnetic field sensor with 3.3V to 24V supply voltage range, hysteresis of 1.75mT, and -40°C to 150°C operating temperature. Ideal for applications requiring precise voltage output based on magnetic field strength in compact surface-mount designs.
SS495A2-SP
SS495A2-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring precise sensing of magnetic fields in the range of -67mT to 67mT, such as automotive systems and industrial automation due to its compact rectangular design and high sensitivity of 3.125 mV/G.
TMAG5170A2EDGKRQ1
TMAG5170A2EDGKRQ1 by Texas Instruments is a magnetic field sensor with 8 terminals, operating voltage range of 2.3V to 5.5V, and output range of -2-2mA. It is ideal for automotive applications due to AEC-Q100 screening level, SPI interface, and surface mounting feature.
AH1902-Z-7
Diodes Incorporated
AH1902-Z-7 by Diodes Inc. is a Hall effect magnetic field sensor with 1mT hysteresis, 0.2-1.6V output range, and operates b/w -40 to 85°C. Ideal for applications requiring precise magnetic field detection in compact spaces like automotive sensors and industrial automation systems.
A1102ELHLT-T
Allegro MicroSystems' A1102ELHLT-T is a magnetic field sensor with 24V max supply voltage, -40 to 85°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and compact rectangular package design.
BU52025G-TR
ROHM
ROHM's BU52025G-TR is a magnetic field sensor with 3-3.6V supply, 0.8mT hysteresis, and 0.40-2.60V output range. Ideal for hall effect sensing in applications requiring precise magnetic field detection within -40 to 85°C temperature range.
BIM-UNTK-AP7X-0.3M-PSG3M
Hans Turck & Kg
BIM-UNTK-AP7X-0.3M-PSG3M by Hans Turck & KG is a MAGNETIC FIELD SENSOR with PNP output, suitable for applications requiring magnetic field detection. It operates b/w -25°C to 70°C, with a supply voltage range of 10V to 30V and max current of 100mA. The sensor has a rectangular shape, measuring 22.7mm x 5 inch x 6 mm, housed in plastic with a connector termination type.
DRV5023BIQLPGMQ1
DRV5023BIQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 8.5 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. It is ideal for automotive applications requiring precise digital current output in a compact rectangular package.
TLE49611MXTSA1
TLE49611MXTSA1 by Infineon is a magnetic field sensor with 3-32V supply, 4mT hysteresis, and -3.5 to 3.5mT magnetic field range. It has an open-drain current output of up to 25mA, suitable for AEC-Q100 automotive applications requiring latched bipolar input mode in a surface-mount package.
DRV5053PAQDBZR
DRV5053PAQDBZR by Texas Instruments is a magnetic field sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 2.5-38V and max output current of 2.3A. Ideal for applications requiring precise Hall effect sensing in compact designs.
SS360NT
SS360NT by Honeywell is a magnetic field sensor with 24V max supply voltage, 6mT hysteresis, and -40 to 150°C operating temperature range. Ideal for detecting magnetic fields in various applications like automotive, industrial automation, and robotics due to its digital current output type and compact rectangular design.
S-5712ACDH2-I4T1U
Seiko Instruments Usa
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.45V; Maximum Supply Voltage: 3.5 V;
DRV5053VAQDBZRQ1
DRV5053VAQDBZRQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.7V to 38V and operating temperatures from -40°C to 125°C. It offers an analog output voltage range of 0-2V, making it suitable for automotive applications requiring precise magnetic field detection in harsh environments compliant with AEC-Q100 standards.
TLE4966V1KHTSA1
Infineon's TLE4966V1KHTSA1 is a Hall effect magnetic field sensor with 3.5-32V supply range, 5mT hysteresis, and 0-10mA current output. Ideal for applications requiring precise magnetic field detection in compact spaces like automotive sensors and industrial automation systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved