Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
Median Price
$1.634
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.280
100+ parts
$0.823
1k+ parts
$0.739
10k+ parts
$0.670
Arrow
$1.437
$0.795
$0.723
$0.618
Element14
$1.830
-
DigiKey
$1.860
$1.115
$0.860
$0.697
Digiode
$1.365
Vyrian
Corphita
$1.293
Magnetic Field Sensors SI7212-B-00-IV attributes and parameters. Explore more Magnetic Field Sensors devices from Silicon Labs
JESD-609 Code:
Sensors or Transducers Type:
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Eic Semiconductor
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1552200253
Molex
WIRE AND CABLE;
Nexperia
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Hy Electronic
HAL1002UT-A
TDK
HAL1002UT-A by TDK is a magnetic field sensor with 4.5-8.5V supply voltage range, -40 to 150°C operating temperature, and 1.2A max output current. Ideal for applications requiring precise current output in a compact rectangular package with through-hole mounting feature.
SS460S-T3
Honeywell Sensing And Control
MAGNETIC FIELD SENSOR,HALL EFFECT;
DRV5032AJDBZR
DRV5032AJDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range of -40 to 85°C, and output current up to 5A. Ideal for applications requiring precise digital current output in a compact rectangular package for surface mount installations.
ACS70311LKTATN-010B5-C
Allegro MicroSystems
Allegro MicroSystems' ACS70311LKTATN-010B5-C is a magnetic field sensor with 4 terminals, operating voltage range of 4.5V to 5.5V, and sensitivity of 10 mV/G. It outputs analog voltage in the range of 0.50-4.50V, suitable for automotive applications due to AEC-Q100 screening and BICMOS technology, with an operating temperature range from -40°C to 150°C.
AH49ENTR-G1
Diodes Incorporated
AH49ENTR-G1 by Diodes Inc. is a magnetic field sensor with 3 terminals, operating voltage range of 3-6.5V, and sensitivity of 1.6mV/G. Ideal for applications requiring single-ended analog voltage output in temperature range -40 to 85°C, such as automotive and industrial systems.
DRV5032FCDBZR
DRV5032FCDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range from -40 to 85 °C, and output type of digital current. It is used for detecting magnetic fields in applications requiring precise measurements such as automotive sensors and industrial automation systems.
TMAG5170A2QDGKT
TMAG5170A2QDGKT by Texas Instruments is a magnetic field sensor with 8 terminals, voltage output range of 0.4-4.6V, and max supply voltage of 5.5V. It operates in temperatures from -40 to 150°C, making it ideal for automotive applications like position sensing and motor control in compact designs.
OHS3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
A1250LLHLT-T
Allegro MicroSystems' A1250LLHLT-T is a magnetic field sensor with 3 terminals, offering a current output range of 30-60mA. It operates b/w -40 to 150°C, with a max supply voltage of 24V. Ideal for automotive applications due to AEC-Q100 and ISO-26262 screening levels.
DRV5032ZEDBZR
Texas Instruments' DRV5032ZEDBZR is a magnetic field sensor with 5.5V max supply voltage, 8.5mT hysteresis, and -40 to 85°C operating temp range. Ideal for applications requiring digital current output in unipolar input mode, such as automotive sensors and industrial automation systems.
SS496A-T2
SS496A-T2 by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 1.57" body width, and 2.5 mV/G sensitivity. Ideal for applications requiring precise magnetic field detection in environments ranging from -40°C to 150°C. Features include a transistor output circuit type and through-hole mounting option for easy installation.
DRV5033FAQDBZR
DRV5033FAQDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range from -40 to 125°C, and output voltage range of 0-38V. Ideal for applications requiring precise detection of magnetic fields in a compact rectangular package.
SS441A
SS441A by Honeywell Sensing And Control is a magnetic field sensor with a plastic/epoxy package. It has a max supply voltage of 30V and hysteresis of 2mT. This sensor is commonly used for measuring magnetic fields in various applications.
TLE4998S8XUMA1
Infineon Technologies
TLE4998S8XUMA1 by Infineon is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 125°C operating temperature, and 0-5mA digital current output. It is used for detecting magnetic fields up to 200mT in applications requiring surface mount installation and solder termination.
EQ-733L
Asahi Kasei Microdevices
EQ-733L by Asahi Kasei Microdevices is a magnetic field sensor with a supply voltage range of 3-5.5V, outputting -1.0-1.0mA analog current. With dimensions of 4.1mm x 1.15 inch x 3mm, it operates b/w -40 to 100°C and is ideal for applications requiring precise Hall effect sensing in various industries.
55505-00-02-A
Hamlin Electronics Europe
MAGNETIC FIELD SENSOR,HALL EFFECT; Output Type: DIGITAL CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 20mA; Maximum Operating Current: 10.5 mA; Termination Type: CABLE;
ALS31313KLEATR-2000
ALS31313KLEATR-2000 by Allegro MicroSystems is a 3-axis magnetic field sensor with a supply voltage range of 2.65V to 3.5V and operating temperature from -40°C to 125°C. It features an open-drain digital voltage output interface, suitable for automotive applications due to AEC-Q100 screening level and surface mounting feature.
TLE49612MXTSA1
TLE49612MXTSA1 by Infineon is a magnetic field sensor with 3-32V supply, 10mT hysteresis, and 0-25mA current output. Ideal for Hall effect applications, it offers -7.3 to 7.3mT magnetic field range detection in a compact rectangular package for surface mount assembly.
A1125LLHLT-T
Allegro MicroSystems' A1125LLHLT-T is a magnetic field sensor with 3 terminals, operating voltage range of 3-24V, and hysteresis of 1mT. Ideal for automotive applications due to AEC-Q100 screening, it offers a current output range of 30-60mA and operates in temperatures from -40 to 150°C.
S-5712ACDL1-M3T1U
Ablic
Ablic's S-5712ACDL1-M3T1U is a magnetic field sensor with 3.5V max supply voltage, 0.8mT hysteresis, and 1.6 inch body width. Ideal for applications requiring voltage output in a compact rectangular package, operating b/w -40 to 85°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved