Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI53304-B-GM by Silicon Labs is a clock driver with 1ns propagation delay at 1.8V, suitable for differential input conditioning. With 32 terminals in a square package, it offers 6 true outputs and operates b/w -40 to 85°C. Ideal for applications requiring precise timing control in compact designs.
Median Price
$5.175
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$3.678
100+ parts
$3.106
1k+ parts
-
10k+ parts
DigiKey
$5.750
$3.693
$3.325
$3.216
RS (Exports)
$4.766
Chip1Stop
$5.320
$5.300
Richardson RFPD
$3.200
Verical
Digiode
$4.389
Vyrian
Semtec, LLC
TME
$4.800
Sensible Micro Corp
Nova Conductors
EPE Components Inc.
Bristol Electronics
Ampacity Inc.
$2.810
Corphita
$4.158
Component Stockers USA
$5.510
$4.100
Andel Nordic
$5.963
$5.724
Aztec Data Supply Inc.
$18.107
Microchip USA
$18.788
Corohmni
$24.424
Advanced Electronics
$39.880
$36.291
$32.702
Authorized Procurement Solutions
RC Electronics
$4.220
$3.850
$3.740
Bastille Electronics
Argo Parts USA
Continental Prestige Electronics
Perfect Parts
Low propagation delay ensures accurate and fast signal transmission, making this product suitable for high-speed applications.
Surface mount technology allows for easy and efficient soldering on PCBs, saving space and reducing assembly time.
Differential input conditioning helps in reducing noise and improving signal integrity, making it ideal for critical applications that require noise immunity.
Having multiple functions in a single device saves PCB space and simplifies overall circuit design.
Operating at a standard supply voltage of 1.8V makes integration with other components easier and more convenient.
High maximum operating temperature range ensures reliable performance even in harsh environmental conditions.
Wide temperature range allows this product to operate in extreme cold conditions, increasing its versatility.
Matte Tin finish provides good solderability and corrosion resistance, extending the product's lifespan and reliability.
Compact width allows for efficient space utilization on the PCB, especially in applications with limited board space.
Symmetrical length dimensions simplify PCB layout and placement, helping in achieving a neat and organized circuit design.
Capable of handling up to 100mA of power supply current, making it suitable for driving multiple output loads without overheating.
Clock Drivers & Buffers SI53304-B-GM attributes and parameters. Explore more Clock Drivers & Buffers devices from Silicon Labs
Additional Features:
Family:
Input Conditioning:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
No. of Functions:
No. of Inverted Outputs:
No. of Terminals:
No. of True Outputs:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Power Supply Current (ICC):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Maximum Same Edge Skew (tskwd):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI53304-B-GM Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Electronic Devices
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
MC100EP210SFATWG
MC100EP210SFATWG clock driver by Onsemi features 0.675ns propagation delay, 2.5V nominal voltage, and 32 terminals in a square package. Ideal for industrial applications requiring differential input conditioning and low profile flatpack style with gull wing terminals.
IDT74FCT3807SOGI
Integrated Device Technology
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
CY2308SXC-4
Infineon Technologies
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SY89218UHY-TR
Microchip Technology
SY89218UHY-TR clock driver by Microchip operates at 2.5V with 1.4ns propagation delay, suitable for industrial use. Features include 64 terminals, differential mux input conditioning, and a max frequency of 2000MHz. Ideal for applications requiring precise timing control in compact spaces.
LMK00306SQ/NOPB
Texas Instruments
LMK00306SQ/NOPB by Texas Instruments is a clock driver with 2.7 ns propagation delay, suitable for industrial applications. It features differential mux input conditioning, 36 terminals, and operates at a temperature range of -40 to 85°C. With a load capacitance of 5 pF and max fmax of 3100 MHz, it offers reliable performance in various electronic systems.
8P34S1208NBGI
Renesas Electronics
Renesas Electronics clock driver 8P34S1208NBGI has 0.4 ns propagation delay, operates at -40 to 85 °C, with 28 terminals in a square package. Ideal for applications requiring differential mux input conditioning and surface mount compatibility.
SI5330L-B00230-GM
Skyworks Solutions
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
CDC208DW
The Texas Instruments CDC208DW clock driver has a propagation delay of 11.7 ns, operates at a supply voltage of 5V, and offers 4 true outputs. It is used in industrial applications requiring precise timing control and low power consumption due to its CMOS technology and enable low control type.
MC100LVEL11DG
MC100LVEL11DG clock driver by Onsemi offers 0.405 ns propagation delay, 2 true outputs at 1000 MHz. Ideal for industrial applications with a temperature range of -40 to 85 °C, differential input conditioning, and small outline package style.
CY2302SXI-1T
Cypress Semiconductor
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
PI6C49CB02Q3WEX
Diodes Incorporated
LOW SKEW CLOCK DRIVER; Screening Level: AEC-Q100;
ICS8305AGLFT
Integrated Circuit Systems
LOW SKEW CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
5PB1102CMGI
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: VSSOP; Package Shape: SQUARE;
9DBV0941AKILF
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
524SCMGI
Renesas Electronics 524SCMGI clock driver has 4.5ns propagation delay, operates in industrial temperature range (-40 to 105 °C), and supports a supply voltage range of 1.71V to 3.465V. Ideal for applications requiring precise timing control in compact electronic devices.
SY89474UMG
SY89474UMG clock driver by Microchip has 0.47 ns propagation delay, 2.5V nominal voltage, and 4 true outputs. Ideal for industrial applications requiring differential mux input conditioning and operating temperatures from -40 to 85 °C.
542MILFT
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
8SLVD1204-33NLGI
Renesas Electronics' 8SLVD1204-33NLGI clock driver has a propagation delay of 0.31 ns, operates at 3.3V, and offers differential mux input conditioning. Ideal for industrial applications requiring precise timing synchronization in compact spaces due to its small form factor and low power consumption.
MC100LVEP11DG
MC100LVEP11DG clock driver by Onsemi features 0.36ns propagation delay, 2.5V nominal voltage, and ECL technology. Ideal for applications requiring high-speed signal transmission in industrial environments with differential input conditioning and small outline package style.
CY2304SXC-1T
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI53307-B-GMR
LOW SKEW CLOCK DRIVER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Width: 3 mm;
Silicon Labs
SI53307-B-GMR by Silicon Labs is a Clock Driver with 1.075 ns Propagation Delay, 16 Terminals, and 5 pF Load Capacitance. It is used in applications requiring precise timing control and signal synchronization, such as high-speed data communication systems or industrial automation equipment.
SI53306-B-GMR
SI53306-B-GMR clock driver by Silicon Labs features 1.05 ns propagation delay, 3.3V nominal voltage, and 5 pF load capacitance. Ideal for industrial applications requiring precise timing synchronization in a compact chip carrier package with standard input conditioning and low power consumption.
LOW SKEW CLOCK DRIVER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Maximum Supply Voltage (Vsup): 1.89 V;
SI53306-B-GM
LOW SKEW CLOCK DRIVER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; No. of True Outputs: 6;
SI53306-B-GM by Silicon Labs is a Clock Driver & Buffer with 16 terminals and 2.75 ns propagation delay. It operates in industrial temperature range (-40 to 85 °C) and supports differential input conditioning. Ideal for applications requiring precise clock distribution in compact spaces.
SI53307-B-GM
SI53307-B-GM clock driver by Silicon Labs features 16 terminals, 1.8V supply voltage, and 1.075ns propagation delay. Ideal for industrial applications requiring a differential mux input conditioning and 3-state output characteristics in a compact chip carrier package with a low profile design.
LOW SKEW CLOCK DRIVER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
SI53340-B-GM
SI53340-B-GM by Silicon Labs is a clock driver with 1000 ns propagation delay, suitable for industrial applications. It operates at 1.8/3.3V and has 16 terminals in a square package shape, making it ideal for differential mux input conditioning. With a max operating temperature of 85°C, this chip carrier features no-lead terminal form and very thin profile style.
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
SI53340-B-GMR
SI53340-B-GMR by Silicon Labs is a clock driver with 1000ns propagation delay, operating at 1.8/3.3V. It has 16 terminals in a square chip carrier package for industrial applications requiring -40 to 85°C temperature range and surface mount compatibility.
Clock Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE;
SI53322-B-GM
SI53301-B-GMR
LOW SKEW CLOCK DRIVER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Propagation Delay (tpd): 1 ns;
SI53301-B-GMR by Silicon Labs is a clock driver with 1 ns propagation delay, suitable for differential input conditioning. It features 32 terminals in a square package style and operates b/w -40 to 85 °C. Ideal for applications requiring precise timing control and low power consumption.
SI5330F-B00214-GMR
SI53322-B-GMR
SI53322-B-GMR by Silicon Labs is a clock driver & buffer with a propagation delay of 0.975 ns, operating temperature range of -40 to 85 °C, and power supplies of 2.5/3.3 V. It is commonly used in industrial applications requiring precise timing control.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved