Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AUDIO SINGLE CHIP RECEIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
Median Price
$4.410
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
Vyrian
Continental Prestige Electronics
$4.322
Argo Parts USA
AZTECH Wire
$10.379
Ampacity Inc.
$20.800
Authorized Procurement Solutions
Kepictronics
Corphita
Netroflash
$4.189
$4.101
Perfect Parts
Receiver ICs SI4844-A10-GU attributes and parameters. Explore more Receiver ICs devices from Silicon Labs
General IC Type:
Peak Reflow Temperature (C):
Maximum Time At Peak Reflow Temperature (s):
SI4844-A10-GU General Purpose ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
Transistor & Electronic
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
American Power Devices
Sensitron Semiconductor
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vicor
Rochester Electronics
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
TBA120S-III
Infineon Technologies
Receiver ICs; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb);
TDA9812N
NXP Semiconductors
AUDIO/VIDEO DEMODULATOR; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 32; Package Code: SDIP; Package Shape: RECTANGULAR;
935275283118
AUDIO SINGLE CHIP RECEIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
MAX13335EGEE/V+T
AUDIO DEMODULATOR; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
TDA3845
AUDIO DEMODULATOR; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
TUA4307
AUDIO SINGLE CHIP RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: QFP; Package Shape: SQUARE;
TDA9803T-T
VIDEO DISCRIMINATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
KB22688B
Samsung
AUDIO DEMODULATOR; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 32; Package Code: SDIP; Package Shape: RECTANGULAR;
TDA9812T
AUDIO/VIDEO DEMODULATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
TDA9885TS/V3,112
AUDIO/VIDEO DEMODULATOR; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
TBA120S-V
TEA6848H
AUDIO SINGLE CHIP RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: LFQFP; Package Shape: SQUARE;
TDA1593T-T
AUDIO DEMODULATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
MC3372P
AUDIO SINGLE CHIP RECEIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
TDA7708S
STMicroelectronics
Receiver ICs; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
NE607DK
AUDIO DEMODULATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: LSSOP; Package Shape: RECTANGULAR;
TDA9874AH
AUDIO DEMODULATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE;
TDA6930X
AUDIO/VIDEO DEMODULATOR; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
SA615DK/01
SA615DK/01 by NXP Semiconductors is an audio single chip receiver with 20 terminals, operating temperature range of -40 to 85°C. It offers a signal-to-noise ratio of 68 dB for FM demodulation applications. This small outline IC has a low profile and shrink pitch package suitable for surface mount designs.
SN76600P
Texas Instruments' SN76600P is an 8-terminal Receiver IC in a rectangular plastic/epoxy package. Operating b/w 0-70°C, it's ideal for commercial applications. Utilizing bipolar technology with through-hole terminals spaced at 2.54mm, it ensures reliable signal reception and processing.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4844-B20-GU
Silicon Labs
AUDIO SINGLE CHIP RECEIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN;
Skyworks Solutions
AUDIO SINGLE CHIP RECEIVER; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40;
SI4844-B20-GUR
AUDIO SINGLE CHIP RECEIVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40;
AUDIO SINGLE CHIP RECEIVER; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN;
SI4844-A10-GUR
AUDIO SINGLE CHIP RECEIVER;
SI4840-A10-GUR
AUDIO SINGLE CHIP RECEIVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40;
AUDIO SINGLE CHIP RECEIVER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN;
SI4820-A10-CUR
AUDIO SINGLE CHIP RECEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
SI4822-A10-CUR
SI4822-A10-CUR by Silicon Labs is an audio single chip receiver with a harmonic distortion of 0.1%. It operates b/w 0 to 70°C and supports AM/FM demodulation. This IC is ideal for applications requiring small outline, surface mount receiver ICs with high signal-to-noise ratio.
SI4835-B30-GUR
AUDIO SINGLE CHIP RECEIVER; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40; Qualification: Not Qualified; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
AUDIO SINGLE CHIP RECEIVER; Qualification: Not Qualified; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3;
SI4825-A10-CSR
AUDIO SINGLE CHIP RECEIVER; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;
AUDIO SINGLE CHIP RECEIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Finish: Matte Tin (Sn); Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;
SI4826-A10-CU
SI4825-A10-CS
AUDIO SINGLE CHIP RECEIVER; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Terminal Finish: Matte Tin (Sn); Peak Reflow Temperature (C): NOT SPECIFIED; Moisture Sensitivity Level (MSL): 3;
SI4822-A10-CU
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved