Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI32193-A-FM1 by Silicon Labs is a SLIC Telecom IC with 38 terminals in a rectangular chip carrier package. It operates at -100 to -15 V battery supply, 3.3 V nominal voltage, and has a max noise of 14 dBrnC. Ideal for analog data transmission interfaces in telecom applications due to its low profile and constant current/resistive battery feed.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
Microchip USA
$16.628
Ampacity Inc.
$598.000
Argo Parts USA
Corphita
Continental Prestige Electronics
Aranea Global
Surface mount capability allows for easy and efficient installation onto circuit boards, saving time and reducing production costs.
Rectangular package shape allows for easy integration into PCB layouts, maximizing space efficiency.
With a high number of terminals, this product can support a wide range of connections and functions, making it versatile in various applications.
With a high maximum operating temperature, this product can operate reliably in demanding environments without overheating.
A standard 3.3V supply voltage ensures compatibility with common power sources, making it easy to integrate into existing systems.
Analog Data Transmission Interfaces SI32193-A-FM1 attributes and parameters. Explore more Analog Data Transmission Interfaces devices from Silicon Labs
Battery Feed:
Battery Supply (V):
JESD-30 Code:
Length:
Maximum Noise:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI32193-A-FM1 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
Thinking Electronic Industrial
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Silicon Standard
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
HC3-5504B-5
Harris Semiconductor
SLIC; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
PBL38773/1SOD
Infineon Technologies
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
MAX14954ETO+
Analog Devices
MAX14954ETO+ by Analog Devices is a BICMOS technology IC with 42 terminals in a chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use as a line equalizer in telecom applications at 3.3V supply voltage. The surface-mount device has a compact rectangular shape measuring 9mm x 3.5mm with a low profile of 0.8mm.
PBL38771/1SOA
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
PBL38621/2SO
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
DS15EA101SQE/NOPB
Texas Instruments
DS15EA101SQE/NOPB by Texas Instruments is a 16-terminal analog data transmission interface with 3.3V supply voltage. It operates in industrial temperature range (-40 to 85°C) and has a low supply current of 0.077mA. Ideal for telecom applications as a line equalizer, it features surface mount packaging with square shape and quad terminal position.
PBL38620/2SHT
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
DS30EA101SQE
DS30EA101SQE by Texas Instruments is a 16-terminal analog data transmission interface with a square package shape. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of 2.5 V. Ideal for telecom applications as a line equalizer IC due to its compact size and quad terminal position.
HC9P5509B3999-003
Renesas Electronics
SLIC; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP28,.4;
Rochester Electronics
SLIC; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Shape: RECTANGULAR; JESD-30 Code: R-PDIP-T24;
LUCL8575BP-TR
Broadcom
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
E-STLC3080
Analog Transmission Interfaces; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
HC-5506CQ
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: QFP; Package Shape: RECTANGULAR;
STLC3080
STLC3080 by STMicroelectronics is a low-profile, square telecom IC designed for analog data transmission. It operates at 3.3V to 5V with a max temp of 85 °C and features a PSRR of 27 dB. Ideal for industrial applications, it supports constant current battery feeds.
PBL38650/2SHA
HA16817NT
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 42; Package Code: DIP; Package Shape: RECTANGULAR;
ATTL7597BAU-DT
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR;
MAX3785ITT-T
Maxim Integrated
LINE EQUALIZER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
L3000SX-VC
L3000SX-VC by STMicroelectronics is an Analog Data Transmission Interface with 15 terminals and a package style of IN-LINE. It operates b/w -40 to 120 °C, supports power supplies of 5V, and has a min PSRR of 30 dB. Ideal for telecom applications requiring SLIC technology in industrial settings.
L3036
STMicroelectronics L3036 is an Analog Data Transmission Interface with +-5V power supplies, 44 terminals, and -24 to -62V battery supply. It is a SLIC telecom IC suitable for industrial temperature grade applications requiring constant current/resistive battery feed.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI32170-C-GM1R
Skyworks Solutions
SLIC; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HLGA; Package Shape: RECTANGULAR; Package Equivalence Code: LGA42, 9X14,20;
SI32170-C-GM1
SLIC; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HLGA; Package Shape: RECTANGULAR; Nominal Supply Voltage: 3.3 V;
SI32919-A-FSR
SI32919-A-FSR by Skyworks Solutions is an analog data transmission interface with a small outline package style. It operates at temperatures ranging from 0 to 70 °C and has a nominal voltage of 3.3 V. This telecom IC type is commonly used in SLIC applications.
SI3210M-GT
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 38; Package Code: TSSOP; Package Shape: RECTANGULAR;
Silicon Labs
SI3210M-GTR
SI32185-A-FMR
SI32185-A-FMR by Silicon Labs is a SLIC telecom IC with 40 terminals in a square chip carrier package. Operating temperature range of 0-70°C, suitable for commercial applications. Nominal voltage of 3.3V makes it ideal for analog data transmission interfaces.
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: QCCN; Package Shape: SQUARE;
SI32391-B-GMR
Analog Transmission Interfaces; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
Analog Transmission Interfaces; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2;
SI32391-B-FMR
Analog Transmission Interfaces; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 40;
Analog Transmission Interfaces; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260;
SI32192-A-GM1
SI32192-A-GM1 by Silicon Labs is a 38-terminal analog data transmission interface in a rectangular chip carrier package. With max noise of 14 dBrnC, it operates b/w -40 to 85 °C and has a nominal voltage of 3.3 V. Ideal for telecom applications requiring SLIC type ICs with constant current/resistive battery feed.
SLIC; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Battery Supply (V): -100 TO -15;
SI32192-A-GM1R
SLIC; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; JESD-30 Code: R-XQCC-N38;
SLIC; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Battery Feed: CONSTANT CURRENT/RESISTIVE;
SI32919-A-FS
SLIC;
SI3220-FQ
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE;
SI32176-B-FM1
SLIC; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HLGA; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved