Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI32179-B-FM1 by Silicon Labs is a SLIC telecom IC with 42 terminals in a grid array package. It operates at -15 to -136 V battery supply, has 12 dBrnC noise, and supports constant current/resistive battery feed. Ideal for analog data transmission interfaces in telecommunications applications.
Median Price
$9.705
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Verical
1+ parts
100+ parts
$6.024
1k+ parts
-
10k+ parts
Digiode
$9.220
Vyrian
Nova Conductors
Ampacity Inc.
$8.250
Corphita
$8.734
Microchip USA
$17.105
QUARKTWIN TECHNOLOGY LTD
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Surface mount design allows for easy and efficient PCB assembly, making this product suitable for mass production.
Rectangular package shape saves space on the circuit board, resulting in a more compact overall design.
Having 42 terminals provides flexibility for connecting various components and peripherals, making it versatile for different applications.
With a high maximum operating temperature of 70°C, this product can withstand harsh environmental conditions without compromising performance.
Operating at a nominal supply voltage of 3.3V ensures compatibility with standard power sources and reduces the need for additional voltage regulation.
Analog Data Transmission Interfaces SI32179-B-FM1 attributes and parameters. Explore more Analog Data Transmission Interfaces devices from Silicon Labs
Battery Feed:
Battery Supply (V):
Hybrid:
JESD-30 Code:
Length:
Maximum Noise:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI32179-B-FM1 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Si3217xB/Si3291x 19/Feb/2021
PCN Assembly/Origin - PCN-1409091 09/Sep/2014
PCN Packaging - PB-1410293 29/Oct/2014
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Infineon Technologies
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bkc Semiconductors
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Temic Semiconductors
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
PBL38665/2SHT
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
STLC3080TR
STLC3080TR by STMicroelectronics is a low-profile, quad terminal SLIC designed for industrial applications. It operates b/w -40 °C to 85°C with a nominal voltage of 5V. This compact 44-terminal device features a square shape and gull-wing terminals for efficient surface mounting.
PBL38665/2QNT
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
L3845
STMicroelectronics L3845 is an Analog Data Transmission Interface with 8 terminals, operating at -40 to 70 °C. It has a supply voltage of 20V and uses Tin/Lead finish. The rectangular package style makes it suitable for various applications in electronics.
MAX14986ETI+
LINE EQUALIZER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR;
LMH0074SQ
LMH0074SQ by Texas Instruments is a 16-terminal analog data transmission interface in a square chip carrier package. With an operating temperature range of -40 to 85°C, it's ideal for industrial telecom applications requiring line equalization at a nominal voltage of 3.3V. The compact design with a seated height of 0.8mm and terminal pitch of 0.65mm makes it suitable for space-constrained environments.
HC55183ECMZ96
Renesas Electronics
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
PEB4264-2(48VQFN)
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: QCCN; Package Shape: SQUARE;
DS80EP100
DS80EP100 by Texas Instruments is a small outline, heat sink package with 6 terminals. It operates in industrial temperature range (-40 to 85 °C) and serves as a line equalizer for analog data transmission interfaces.
MAX3805ETE
LINE EQUALIZER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
DS64EV400SQX/NOPB
DS64EV400SQX/NOPB by Texas Instruments is a 48-terminal analog data transmission interface with power supplies of 2.5/3.3V, suitable for telecom applications as a line equalizer. It features a square package shape, matte tin terminal finish, and operates in industrial temperature range from -40 to 85°C.
MAX3805ETE#G16
SI32170-C-FM1
Skyworks Solutions
SLIC; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HLGA; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
L3000SX-VM
L3000SX-VM by STMicroelectronics is an Analog Data Transmission Interface with 15 terminals, operating at 5V. It features a temperature range of 0 to 70 °C and supports battery supplies from -48V to +72V. Ideal for SLIC telecom applications due to its PLASTIC/EPOXY package and BIPOLAR technology.
PEB4166
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
HA16817NT
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 42; Package Code: DIP; Package Shape: RECTANGULAR;
SI32179-B-FM1
SLIC; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HLGA; Package Shape: RECTANGULAR; No. of Functions: 1;
PBL38621/2SOS
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
SI3220-GQ
Silicon Labs
SI3220-GQ by Silicon Labs is an Analog Data Transmission Interface with 64 terminals, operating at 3.3/5V. It features a flatpack, thin profile package style and offers constant current battery feed. Ideal for telecom applications requiring SLIC technology, it has a temperature range of -40 to 85°C and excellent PSRR of 40dB.
SI32193-A-FM1
SI32193-A-FM1 by Silicon Labs is a SLIC Telecom IC with 38 terminals in a rectangular chip carrier package. It operates at -100 to -15 V battery supply, 3.3 V nominal voltage, and has a max noise of 14 dBrnC. Ideal for analog data transmission interfaces in telecom applications due to its low profile and constant current/resistive battery feed.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI32170-C-GM1R
SLIC; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HLGA; Package Shape: RECTANGULAR; Package Equivalence Code: LGA42, 9X14,20;
SI32170-C-GM1
SLIC; Terminal Form: NO LEAD; No. of Terminals: 42; Package Code: HLGA; Package Shape: RECTANGULAR; Nominal Supply Voltage: 3.3 V;
SI32919-A-FSR
SI32919-A-FSR by Skyworks Solutions is an analog data transmission interface with a small outline package style. It operates at temperatures ranging from 0 to 70 °C and has a nominal voltage of 3.3 V. This telecom IC type is commonly used in SLIC applications.
SI3210M-GT
SLIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 38; Package Code: TSSOP; Package Shape: RECTANGULAR;
SI3210M-GTR
SI32185-A-FMR
SI32185-A-FMR by Silicon Labs is a SLIC telecom IC with 40 terminals in a square chip carrier package. Operating temperature range of 0-70°C, suitable for commercial applications. Nominal voltage of 3.3V makes it ideal for analog data transmission interfaces.
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: QCCN; Package Shape: SQUARE;
SI32391-B-GMR
Analog Transmission Interfaces; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
Analog Transmission Interfaces; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2;
SI32391-B-FMR
Analog Transmission Interfaces; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 40;
Analog Transmission Interfaces; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2; Peak Reflow Temperature (C): 260;
SI32192-A-GM1
SI32192-A-GM1 by Silicon Labs is a 38-terminal analog data transmission interface in a rectangular chip carrier package. With max noise of 14 dBrnC, it operates b/w -40 to 85 °C and has a nominal voltage of 3.3 V. Ideal for telecom applications requiring SLIC type ICs with constant current/resistive battery feed.
SLIC; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Battery Supply (V): -100 TO -15;
SI32192-A-GM1R
SLIC; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; JESD-30 Code: R-XQCC-N38;
SLIC; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Battery Feed: CONSTANT CURRENT/RESISTIVE;
SI32919-A-FS
SLIC;
SI3220-FQ
SLIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE;
SI32176-B-FM1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved