Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SYSTEM ON CHIP;
Median Price
$10.000
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$9.530
100+ parts
$8.230
1k+ parts
$8.190
10k+ parts
-
Mouser Electronics
$12.690
$10.960
$8.490
Newark
$14.870
$11.710
$10.210
Element14
$15.247
$11.695
$11.465
Chip1Stop
Arrow
$9.886
Verical
Flip Electronics (Authorized)
Digiode
$8.090
Nova Conductors
$9.848
Vyrian
Flip Electronics
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Corphita
$7.664
Semicontronic
$7.940
$7.742
$7.702
Ampacity Inc.
Aranea Global
$9.651
$9.265
Continental Prestige Electronics
$11.830
$8.710
Advanced Electronics
$22.055
Corohmni
$54.453
Aztec Data Supply Inc.
$80.950
Argo Parts USA
Authorized Procurement Solutions
Other Function uPs,uCs & Peripheral ICs MGM210PA32JIA2R attributes and parameters. Explore more Other Function uPs,uCs & Peripheral ICs devices from Silicon Labs
Peripheral IC Type:
MGM210PA32JIA2R Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
DS18B20
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
CC2541F256RHAR
CC2541F256RHAR by Texas Instruments is a 40-terminal microprocessor circuit with 8192 bytes of RAM. Operating at temperatures from -40 to 85°C, it supports I2C, SPI, USART, and USB bus compatibility. Ideal for industrial applications requiring low power consumption and versatile peripheral interfaces.
XC7Z015-2CLG485E
Xilinx
The Xilinx XC7Z015-2CLG485E is a System on Chip with CMOS technology. It operates b/w 0-100°C, with supply voltage range of 0.95-1.05V. With 485 terminals in a low profile grid array package, it's ideal for various applications requiring high-performance processing capabilities in compact designs.
XC7Z010-3CLG400E
XC7Z010-3CLG400E by Xilinx is a System on Chip with CMOS technology. It operates b/w 0-100°C, with supply voltage ranging from 0.95V to 1.05V. This low-profile chip in a grid array package is ideal for various applications requiring high performance and compact design.
ESP32-S3-WROOM-1U-N16
Espressif Systems (Shanghai)
ESP32-S3-WROOM-1U-N16 by Espressif Systems is a 41-terminal SoC with CMOS technology. It operates b/w -40 to 85 °C and requires a supply voltage of 3-3.6 V. Ideal for IoT applications due to its compact size (18x19.2 mm) and surface-mount capability.
FT220XS-T
FTDI
MICROPROCESSOR CIRCUIT; Technology: CMOS;
EFR32MG12P432F1024IM48-CR
Silicon Labs
EFR32MG12P432F1024IM48-CR by Silicon Labs is a System on Chip with 48 terminals, operating at temperatures from -40 to 125°C. It has a supply voltage range of 1.8V to 3.8V and utilizes CMOS technology. This chip is ideal for applications requiring low-profile, surface-mount components in various electronic systems.
MCIMX356AVM4B
Freescale Semiconductor
SYSTEM ON CHIP; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 400; Package Code: LFBGA; Package Shape: SQUARE;
MCIMX6Q6AVT10AER
NXP Semiconductors
MCIMX6Q6AVT10AER by NXP Semiconductors is a 624-terminal SoC with CMOS technology. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 1.35V to 1.5V and peak reflow temp of 260C, it's ideal for various uP/uC functions in surface-mount designs.
EFR32MG24B220F1536IM48-B
EFR32MG24B220F1536IM48-B by Silicon Labs is a SoC with CMOS technology. It operates b/w -40 to 125°C, with supply voltage range of 1.71V to 3.8V. With 48 terminals in a square package, it's ideal for IoT and wireless applications due to its low profile and high temperature tolerance.
SLB9670VQ20FW785XTMA1
Infineon Technologies
SLB9670VQ20FW785XTMA1 by Infineon: 32-terminal IC with max supply voltage of 1.95V, ideal for cryptographic authentication applications. Features CMOS technology, operates b/w -20 to 85 °C, and has a compact square package style suitable for surface mount assembly.
CY8C3866AXI-039T
CY8C3866AXI-039T by Infineon is a 100-terminal, low-profile, fine-pitch FLATPACK IC with a CMOS technology and 524288 ROM bits. Operating at -40 to 85 °C, it has a supply voltage range of 1.71V to 5.5V making it ideal for industrial applications requiring a programmable SoC solution.
SCANSTA112SMX
MICROPROCESSOR CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 100; Package Code: LFBGA; Package Shape: SQUARE;
NRF52805-CAAA-R
Nordic Semiconductor Asa
NRF52805-CAAA-R by Nordic Semiconductor Asa is a 28-terminal SoC with CMOS technology. It operates b/w -40 to 85 °C, with supply voltage range of 1.7V to 3.6V. Ideal for applications requiring a compact GRID ARRAY package with very thin profile and fine pitch terminals.
ATECC608A-SSHDA-T
Microchip Technology
Microchip ATECC608A-SSHDA-T is a cryptographic authenticator IC with 8 terminals, CMOS technology, and 2-5.5V supply voltage range. Ideal for industrial applications, it operates b/w -40 to 85°C and features TS16949 screening level for secure communication systems.
FXLC95000CLR1
FXLC95000CLR1 by NXP Semiconductors is a CMOS microprocessor circuit with 24 terminals and a rectangular package shape. It operates at a min supply voltage of 1.71V and has an industrial temperature grade of -40 to 85°C. This peripheral IC is suitable for various applications requiring low voltage and compact size.
CY8C4146LQI-S422T
PROGRAMMABLE SoC; Temperature Grade: INDUSTRIAL; Terminal Finish: PURE TIN; Moisture Sensitivity Level (MSL): 3;
MIMX8MM6DVTLZAAR
The NXP Semiconductors MIMX8MM6DVTLZAAR is a low-profile, fine-pitch SoC with 486 terminals. Operating b/w 0-95°C, it has a supply voltage range of 0.95-1.05V and uses CMOS technology. Ideal for applications requiring high processing power in compact spaces.
CC1310F128RSMT
CC1310F128RSMT by Texas Instruments is a Cortex-M3 CPU with 28672 RAM bytes. It operates b/w -40 to 85°C, with a supply voltage range of 1.8-3.8V. Ideal for industrial applications requiring a microprocessor circuit in a compact chip carrier package.
CYAT827AZA59-22002
PSoC;
XC7Z007S-2CLG400I
The Xilinx XC7Z007S-2CLG400I is a System on Chip with CMOS technology. It operates b/w -40 to 100°C, with supply voltage ranging from 0.95V to 1.05V. This low profile chip has 400 terminals and is ideal for various applications in the field of Other Function uPs,uCs & Peripheral ICs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MGM210PB32JIA2
MGM210PB32JIA2R
MGM210PA22JIA2R
MGM210PA22JIA2
MGM210PA32JIA2
MGM220PC22HNA2
SoC; Terminal Form: NO LEAD; No. of Terminals: 31; Package Code: XMA; Package Shape: RECTANGULAR; Additional Features: ALSO OPERATES WITH 2.2VMIN SUPPLY IN REGULATION MODE;
MGM210PB22JIA2R
MGM210PB22JIA2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved