Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Dark Current: 200 nA; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 55 V;
Median Price
$0.873
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.472
100+ parts
$0.448
1k+ parts
10k+ parts
-
Arrow
$1.293
$0.680
$0.488
$0.416
Newark
$1.310
$0.678
$0.490
$0.451
Mouser Electronics
$1.340
$0.450
DigiKey
$1.360
$0.720
$0.612
Farnell
$1.536
$0.630
$0.581
Element14
$1.910
$1.010
$0.852
TTI Europe
$0.342
$0.336
TTI
$0.504
$0.467
EBV Elektronik
Verical
$0.669
$0.468
Bürklin Elektronik
$0.730
$0.550
$0.520
RS (Exports)
$0.537
Chip1Stop
$0.301
Digiode
Nova Conductors
$0.518
TME
$1.130
$0.610
$0.362
$0.347
Maritex
$1.201
$0.636
$0.427
$0.390
IBS Electronics
$0.582
$0.568
Vyrian
Chip Stock
Rutronik
$0.444
NAC Semi
$1.510
ComSIT Distribution GmbH
ComSIT USA
ABC Electronics Ltd.
LIBRA Elektronik GmbH
Holdelec - ElecDif-Pro
Semi Source
Pegasus Components GmbH
Micros
$0.310
Partservice
$0.302
Corel Iberica Componentes, S.L.
North Shore Components
Sensible Micro Corp
Ashlea Components Ltd
ACDS - Activité Composants Distribution Service
PC Components Company LLC
Bristol Electronics
Sunrise Surplus Inc.
Semicontronic
$0.204
$0.199
$0.198
Advanced Electronics
$0.248
$0.236
Corphita
$0.425
Argo Parts USA
$0.457
Aztec Data Supply Inc.
$0.480
Corohmni
$0.563
Component Stockers USA
$0.770
$0.320
$0.290
$0.270
Modulus Dynamics
$0.795
$0.763
$0.731
Continental Prestige Electronics
$0.840
$0.400
$0.352
$0.331
RC Electronics
$0.540
$0.470
Perfect Parts
Eastek
$0.826
Assy Fe
GreenTree Electronics
Authorized Procurement Solutions
Glotronic Ltd.
Kepictronics
Infinite Electronics LLP (Excess)
Futuretech Components
Optocoupler Transistor Outputs SFH6286-3T attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Siemens
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Isolation Voltage:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
SFH6286-3T Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Bytesonic Electronics
TLP293-4(GB,E(T
Toshiba
Toshiba's TLP293-4(GB,E(T) is a 4-channel optocoupler with max. forward current of 0.05A and max. power dissipation of 0.1W. Ideal for applications requiring high isolation voltage (3750V), such as industrial control systems and power supplies due to its transistor output configuration and high collector-emitter breakdown voltage of 80V.
SFH6156-4T
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Dark Current: 100 nA; No. of Elements: 1;
IL207AT
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 4000 V; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V; JESD-609 Code: e3;
FODM121V
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 50 %; Maximum Forward Current: .05 A;
CNY17-3-000E
Broadcom
CNY17-3-000E by Broadcom is a SINGLE optocoupler with 0.06A forward current, 100% min. transfer ratio, and 5000V isolation voltage. Ideal for applications requiring high-speed response time and reliable electrical isolation in temperatures ranging from -55 to 100°C.
MOC223M
The Onsemi MOC223M is a single optocoupler with a Darlington output, featuring a max forward current of 0.06 A and an isolation voltage of 2500 V. With a min operating temperature of -40°C and mounting feature for surface mount applications, it is ideal for use in high-power electronic circuits requiring reliable signal isolation.
ILD217T
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Dark Current: 50 nA; Maximum Operating Temperature: 100 Cel; Configuration: SEPARATE, 2 CHANNELS; Minimum Operating Temperature: -55 Cel;
4N25
Isocom Components
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; No. of Elements: 1; Maximum Forward Voltage: 1.5 V; JESD-609 Code: e3;
HCPL-817-300E
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.4 V; Maximum Power Dissipation: .15 W;
4N35
Harris Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Collector-emitter Breakdown Voltage: 30 V; Additional Features: IC COMPATIBLE, VDE APPROVED, UL RECOGNIZED; Maximum Isolation Voltage: 2250 V; Minimum Operating Temperature: -55 Cel;
TLP290-4(GB-TP,E)
Toshiba's TLP290-4(GB-TP,E) is a 4-channel optocoupler with max. forward current of 0.05A, operating temp. range from -55 to 110°C, and isolation voltage up to 2500V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer in separate configurations.
SFH690BT
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Current Transfer Ratio: 100 %; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Additional Features: UL RECOGNIZED;
MCT61
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Operating Temperature: 100 Cel; No. of Elements: 2; Configuration: SEPARATE, 2 CHANNELS;
PC817X2NIP1B
Sharp Corporation
Sharp Corporation's PC817X2NIP1B is a SINGLE optocoupler with max. forward current of 0.05A, 260% transfer ratio, and 5000V isolation voltage. Ideal for applications requiring transistor output optocouplers like temperature sensors and industrial automation due to its -30 to 100°C operating range and 80V breakdown voltage.
TLP183(GB-TPL,E
Toshiba's TLP183(GB-TPL,E is a single optocoupler with max. forward current of 0.05A, operating temp. range -55 to 125°C, and min. CTR of 100%. Ideal for applications requiring high isolation voltage (3750V), low dark current (80nA), and surface mounting feature.
HMHA2801AR2
The Onsemi HMHA2801AR2 is a SINGLE Optocoupler Transistor Output with a Max Forward Current of 0.05A and Min C-E Breakdown Voltage of 80V. Ideal for applications requiring high isolation voltage up to 3750V, such as industrial control systems and power supplies.
TLP127-4
Toshiba TLP127-4 is a 4-channel optocoupler with Darlington output, built-in diode and resistor. It has a max forward current of 0.05A, operating temp range from -25°C to 85°C, and isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio and collector-emitter breakdown voltage up to 300V.
TLP185(BL-TPL,SE(T
Toshiba's TLP185(BL-TPL,SE(T optocoupler features a max forward current of 0.05A and min operating temp of -55°C, ideal for single configuration applications. With a min current transfer ratio of 200%, it offers high isolation voltage of 3750V, making it suitable for surface mount setups requiring reliable transistor output optocouplers.
Tt Electronics Plc
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Additional Features: UL RECOGNIZED; Maximum Power Dissipation: .15 W;
SFH6186-3-X001T
SFH6186-3-X001T by Infineon is a SINGLE optocoupler with 0.05A forward current, 55V breakdown voltage, and 5300V isolation. Ideal for applications requiring high reliability in harsh environments with temperatures ranging from -55 to 100°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SFH6156-3T
Vishay Intertechnology
Vishay Intertechnology SFH6156-3T is a single optocoupler with max. forward current of 0.06A, operating temp. range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer in harsh environments.
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Minimum Current Transfer Ratio: 34 %; Maximum Power Dissipation: .15 W; Maximum Isolation Voltage: 5300 V; Maximum On State Current: .05 A;
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 100 %; Configuration: SINGLE;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Nominal Current Transfer Ratio: 70 %; Minimum Collector-emitter Breakdown Voltage: 70 V; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A;
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5300 V; Additional Features: UL APPROVED;
SFH6916
Vishay Intertechnology SFH6916 is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and isolation voltage of 3750V, making it ideal for high-voltage applications. With surface mounting feature, it operates b/w -55°C to 100°C, offering reliable performance in various environments.
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Minimum Current Transfer Ratio: 50 %; Maximum Power Dissipation: .15 W;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 4; Minimum Collector-emitter Breakdown Voltage: 70 V; Additional Features: UL APPROVED; Maximum Forward Current: .05 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Nominal Current Transfer Ratio: 50 %; JESD-609 Code: e0; Maximum Dark Current: 100 nA;
SFH6156-2T
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; No. of Elements: 1; Nominal Current Transfer Ratio: 63 %; Maximum Forward Current: .06 A; Minimum Operating Temperature: -55 Cel;
SFH6156-2T by Vishay Intertechnology is a single optocoupler transistor output with a max forward current of 0.06 A. It has a min operating temperature of -55°C and a max operating temperature of 100°C. This component is commonly used in applications requiring high isolation voltage, such as industrial control systems and power supplies.
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .06 A; Minimum Current Transfer Ratio: 22 %; No. of Elements: 1; Maximum On State Current: .05 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 45 %; Maximum Dark Current: 50 nA; Maximum Isolation Voltage: 5300 V; Additional Features: UL RECOGNIZED, VDE APPROVED;
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 70 V; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A;
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Forward Voltage: 1.65 V; Minimum Current Transfer Ratio: 56 %; Maximum Forward Current: .06 A; Maximum On State Current: .05 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN; JESD-609 Code: e3; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Dark Current: 100 nA; Configuration: SINGLE;
SFH6156-4T by Vishay Intertechnology is a single optocoupler transistor output with a max forward current of 0.06 A. It has a min operating temperature of -55°C and a max operating temperature of 100°C. This component is commonly used in applications requiring high isolation voltage and low dark current.
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V;
Vishay Intertechnology SFH690BT is a single optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer in harsh environments.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved