Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FODM121AR2 by Onsemi is a single optocoupler with a max forward current of 0.05A and min C-E breakdown voltage of 80V. With a high isolation voltage of 3750V, it's ideal for applications requiring reliable signal transmission in harsh environments. Suitable for surface mounting, this transistor output optocoupler has a low dark current of 100nA and operates b/w -40°C to 100°C.
Median Price
$0.444
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.473
100+ parts
$0.449
1k+ parts
10k+ parts
-
Mouser Electronics
$0.540
$0.272
$0.219
$0.175
Arrow
$0.578
$0.286
$0.168
DigiKey
$0.580
$0.287
$0.221
$0.186
Newark
$0.597
$0.295
$0.245
Verical
$0.259
$0.234
EBV Elektronik
Master Electronics
$0.270
$0.220
$0.176
Farnell
$0.257
$0.198
Chip1Stop
$0.196
$0.184
$0.183
Element14
$0.414
$0.321
Nova Conductors
$0.246
Digiode
Chip Stock
Flip Electronics
ComSIT Distribution GmbH
Vyrian
Cyclops Electronics Ltd
NAC Semi
$0.653
IBS Electronics
$0.379
$0.309
$0.247
Prism Electronics
Semi Source
Semicontronic
$0.081
$0.079
Ampacity Inc.
Corohmni
$0.095
Argo Parts USA
$0.239
Modulus Dynamics
$0.273
$0.262
Corphita
$0.426
Advanced Electronics
Continental Prestige Electronics
$0.667
$0.250
$0.193
$0.167
Aztec Data Supply Inc.
$0.752
Andel Nordic
$9.593
$9.209
RC Electronics
$0.230
Lixinc
Perfect Parts
Kepictronics
Kulean Microsystems
SupplyDigital Components
Eastek
$0.470
A-Z Elektronik GmbH
Alle Elektronik GmbH
Supply Digital
iodParts Technologies Inc.
$0.380
Authorized Procurement Solutions
Robosynatics
$10.528
Lucentia Tech
Netroflash
$0.241
$0.229
Problanco Electronics
UHIMA Technologies
TANS Electronics
Single configuration makes it easier to implement and troubleshoot in a circuit.
With a maximum forward current of 0.05 A, it can handle moderate to low power applications effectively.
Transistor output optocoupler provides high current transfer ratio and low input current requirements, making it suitable for various applications.
Ability to operate at a high temperature range of up to 100°C ensures reliability in demanding environments.
Can also operate at low temperatures down to -40°C, making it versatile for use in different climates.
Matte Tin finish provides good solderability and corrosion resistance for long-term functionality.
Efficient power dissipation of 0.15 W allows for stable operation without overheating.
High current transfer ratio ensures accurate signal transmission and minimal signal loss.
Low dark current minimizes leakage current and enhances the accuracy of the output signal.
Relatively high breakdown voltage ensures protection against voltage spikes and overloads.
Consistent current transfer ratio ensures reliable performance over time.
High isolation voltage of 3750 V ensures safe signal transmission and protects sensitive components in a circuit.
Surface mount design offers easy and secure installation on PCBs, saving space and simplifying assembly.
Low forward voltage drop of 1.3 V reduces power loss and improves efficiency.
Can handle a maximum on-state current of 0.08 A, making it suitable for switching applications with moderate current requirements.
Optocoupler Transistor Outputs FODM121AR2 attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
FODM121AR2 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Protek Devices
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
HCNR200-300E
Agilent Technologies
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; Maximum Forward Voltage: 1.85 V; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
TLP281-4(GB-TP,J,F
Toshiba
Toshiba's TLP281-4(GB-TP,J,F) is a 4-channel optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. It operates in temperatures ranging from -55 to 100 °C and has a min collector-emitter breakdown voltage of 80V. This optocoupler is commonly used for applications requiring electrical isolation b/w high-voltage systems and low-voltage control circuits.
H11G1SR2M
The Onsemi H11G1SR2M is a single optocoupler with a Darlington output, ideal for applications requiring high isolation voltage of 7500V. It has a max forward current of 0.06A and min operating temperature of -40°C, making it suitable for various surface mount configurations in electronics. With a collector-emitter breakdown voltage of 100V and current transfer ratio of 1000%, this optocoupler offers reliable performance in demanding environments.
SFH6286-3T
Infineon Technologies
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Additional Features: UL APPROVED; Minimum Collector-emitter Breakdown Voltage: 55 V; No. of Elements: 1; Maximum Dark Current: 200 nA;
TLP183(TPL,E
Toshiba's TLP183(TPL,E optocoupler features 3750V isolation voltage, 0.05A forward current, and -55 to 125°C operating temperature range. Ideal for applications requiring high voltage isolation and signal transmission b/w circuits in industrial electronics and automation systems.
SFH6186-5
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Configuration: SINGLE; Maximum Forward Current: .06 A; Nominal Current Transfer Ratio: 300 %; Maximum Isolation Voltage: 5300 V;
CNY173M
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 70 V;
PS2811-1-F3-A-L
Renesas Electronics
Renesas Electronics PS2811-1-F3-A-L is a single optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 2500V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and nominal transfer ratio of 150%.
TLP291-4(E(T
Toshiba's TLP291-4(E(T) is a 4-channel optocoupler with max. forward current of 0.05A, operating temp. range from -55 to 110°C, and max. isolation voltage of 2500V. Ideal for applications requiring high voltage isolation and signal transmission in industrial electronics and automation systems.
PS2911-1-F3-AX
PS2911-1-F3-AX by Renesas Electronics is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 2500V. With a min. operating temp of -55°C and max. power dissipation of 0.12W, it's suitable for surface mount configurations in various electronic devices.
HMHA2801AR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Configuration: SINGLE; Maximum Forward Voltage: 1.3 V; Maximum Isolation Voltage: 3750 V;
H11G1SM
The Onsemi H11G1SM is a single optocoupler with a Darlington output, featuring a max forward current of 0.06A and an isolation voltage of 7500V. With a min operating temperature of -40°C and max of 100°C, it is ideal for applications requiring high current transfer ratio, such as industrial control systems and power supplies.
PS2501L-1-A
California Eastern Laboratories
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Operating Temperature: 100 Cel; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 80 V; Configuration: SINGLE;
4N25
Intersil
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.5 V; Maximum Response Time: .0000028 s; Maximum Forward Current: .06 A;
TLP291-4(TP,E)
Toshiba's TLP291-4(TP,E) is a 4-channel optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 2500V. With a min. operating temp of -55°C and max. power dissipation of 0.1W, it offers reliable performance in various circuits needing transistor output optocouplers.
4N35-X007
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Dark Current: 50 nA; Minimum Operating Temperature: -55 Cel;
PS2801-1-F3-A
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 80 %; Maximum Isolation Voltage: 2500 V; Maximum Forward Current: .05 A; Configuration: SINGLE; Additional Features: UL RECOGNIZED;
LTV-817S-A
Lite-on Technology
LTV-817S-A by Lite-on Technology is a single optocoupler with a max forward current of 0.05A and min operating temperature of -30°C. With a collector-emitter breakdown voltage of 35V, it's ideal for applications requiring high isolation voltage up to 5000V in surface mount configurations.
TLP281(GR)
Toshiba's TLP281(GR) is a single optocoupler with max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 2500V. With a min current transfer ratio of 50%, it operates b/w -55°C to 100°C, making it suitable for various electronic circuits and industrial control systems.
TCMT1600T3
Vishay Intertechnology's TCMT1600T3 is a single optocoupler with max forward current of 0.06A, operating temp range -40 to 100°C, and isolation voltage of 3750V. Ideal for applications requiring AC input-transistor output optocouplers like industrial automation and power supplies due to its high collector-emitter breakdown voltage and reliable current transfer ratio of 80%.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FODM8801CR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Operating Temperature: 125 Cel; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -40 Cel;
FODM8801CR2V by Onsemi is a single optocoupler with a max forward current of 0.02A and min operating temperature of -40°C. With a nominal current transfer ratio of 330%, it is ideal for applications requiring high isolation voltage up to 3750V, such as in power supplies and industrial controls.
FODM8801CR2
FODM8801CR2 by Onsemi is a single optocoupler with a max forward current of 0.02A and min CTR of 100%. With a breakdown voltage of 75V, it's ideal for applications requiring high isolation voltage and fast response time in temperatures ranging from -40 to 125°C.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); No. of Elements: 1; Minimum Current Transfer Ratio: 100 %; Configuration: SINGLE;
FODM124R2
FODM124R2 by Onsemi is a single optocoupler with max forward current of 0.05A, operating temp range -40 to 100°C, and isolation voltage of 3750V. Ideal for applications requiring high isolation voltage and low power dissipation in surface mount configurations.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Configuration: SINGLE; No. of Elements: 1; JESD-609 Code: e3;
FODM8801CV
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum On State Current: .03 A; Maximum Forward Current: .02 A; Minimum Current Transfer Ratio: 100 %;
FODM8801CV by Onsemi is a single optocoupler with a max forward current of 0.02A and min operating temperature of -40°C, ideal for applications requiring high isolation voltage up to 3750V. With a fast response time of 0.00002s and surface mounting feature, it offers reliable performance in various electronic circuits.
FODM124R2V
FODM124R2V by Onsemi is a SINGLE optocoupler with a max forward current of 0.05A and min operating temperature of -40°C. With a collector-emitter breakdown voltage of 80V, it's ideal for applications requiring high isolation voltage up to 3750V in surface mount configurations.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 80 V; Nominal Current Transfer Ratio: 100 %;
FODM8801C
The Onsemi FODM8801C is a single optocoupler with a max forward current of 0.02A and min operating temperature of -40°C, ideal for applications requiring high isolation voltage up to 3750V. With a fast response time of 0.00002s and high current transfer ratio of 330%, it is suitable for surface mount configurations in various electronic circuits.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Current Transfer Ratio: 100 %; Maximum Forward Current: .02 A;
FODM121AR2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .05 A; Configuration: SINGLE;
FODM2705R2
FODM2705R2 by Onsemi is a single optocoupler with max forward current of 0.05A, operating temp range -40 to 100°C, and isolation voltage of 3750V. Ideal for AC input-transistor output applications in surface mount configurations.
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Collector-emitter Breakdown Voltage: 40 V; Maximum Isolation Voltage: 3750 V; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 100 nA;
FODM124
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -40 Cel; Maximum Dark Current: 100 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Nominal Current Transfer Ratio: 100 %; Maximum Forward Current: .05 A; Additional Features: UL APPROVED;
FODM121AR2V
FODM121AR2V by Onsemi is a single optocoupler with a max forward current of 0.05A and min C-E breakdown voltage of 80V. With a high isolation voltage of 3750V, it's ideal for applications requiring reliable signal transmission in harsh environments. Suitable for surface mounting, this transistor output optocoupler has a low dark current of 100nA and operates b/w -40°C to 100°C.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Dark Current: 100 nA; Nominal Current Transfer Ratio: 100 %; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 80 V;
FODM121FR2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Forward Current: .05 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved