Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FODM124R2V by Onsemi is a SINGLE optocoupler with a max forward current of 0.05A and min operating temperature of -40°C. With a collector-emitter breakdown voltage of 80V, it's ideal for applications requiring high isolation voltage up to 3750V in surface mount configurations.
Median Price
$0.300
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Rochester
1+ parts
$0.181
100+ parts
$0.171
1k+ parts
$0.154
10k+ parts
-
Adafruit Industries
$0.307
$0.292
DigiKey
$0.630
$0.318
$0.246
$0.208
Mouser Electronics
$0.188
Farnell
$0.293
$0.227
$0.191
Arrow
$0.245
Verical
$0.198
Element14
$0.461
$0.356
Digiode
$0.172
Nova Conductors
$0.253
Vyrian
IBS Electronics
$0.155
Semtec, LLC
Chip Stock
Flip Electronics
Mil-Aero Solutions, Inc.
EMSNET
Prism Electronics
Ampacity Inc.
$0.150
Corphita
$0.163
Corohmni
$0.176
Argo Parts USA
$0.243
$0.236
Netroflash
$0.240
$0.235
Advanced Electronics
Semicontronic
$0.326
$0.316
Continental Prestige Electronics
$0.639
$0.242
$0.193
$0.162
Aztec Data Supply Inc.
$0.745
Andel Nordic
$10.580
$10.157
Perfect Parts
Authorized Procurement Solutions
SupplyDigital Components
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
Kulean Microsystems
A-Z Elektronik GmbH
Glotronic Ltd.
Alle Elektronik GmbH
Robosynatics
$0.558
$0.546
Lucentia Tech
Supply Digital
Problanco Electronics
UHIMA Technologies
Modulus Dynamics
SINGLE - This single configuration makes it easy to use and integrate into various electronic circuits.
0.05 A - With a high maximum forward current, this optocoupler can handle a wide range of applications.
TRANSISTOR OUTPUT OPTOCOUPLER - This type of optocoupler provides reliable performance with transistor output.
100 °C - Able to operate at high temperatures, ensuring stability and reliability in challenging environments.
40 °C - Can also operate at low temperatures, making it versatile for use in different conditions.
MATTE TIN - The matte tin finish provides excellent conductivity and corrosion resistance for long-lasting performance.
0.07 W - With a low power dissipation, this optocoupler can operate efficiently without overheating.
50% - The high minimum current transfer ratio ensures accurate signal transmission between input and output.
100 nA - Low dark current minimizes signal distortion and improves overall performance.
80 V - The high breakdown voltage protects the optocoupler from voltage spikes, ensuring durability.
100% - This high current transfer ratio ensures reliable and accurate signal transmission for precise control.
3750 V - The high isolation voltage provides excellent protection against voltage surges and ensures safety in operation.
SURFACE MOUNT - The surface mount feature allows for easy installation and saves space on the circuit board.
1.3 V - The low forward voltage drop ensures energy efficiency and reduced power consumption.
0.08 A - With a high on-state current, this optocoupler can handle heavy loads with ease.
Optocoupler Transistor Outputs FODM124R2V attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
FODM124R2V Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Changes 11/Aug/2021 Logo 17/Aug/2017
PCN Packaging - Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
EU2B-YS2J03C
Idec
ROTARY SWITCH;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Continental Device India
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1552200168
Molex
WIRE AND CABLE;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
1N4148WS
Meritek Electronics
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Temic Semiconductors
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
IS281-4GB
Isocom
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Maximum Power Dissipation: .17 W; Maximum Isolation Voltage: 3000 V; Maximum Dark Current: 100 nA;
FODM121R2
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 3750 V; Maximum Forward Current: .05 A;
FODM8801CV
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum On State Current: .03 A; Maximum Forward Current: .02 A; Minimum Current Transfer Ratio: 100 %;
TLP291-4(TP,E(T
Toshiba
Toshiba's TLP291-4(TP,E(T) is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -55°C to 110°C. Ideal for applications requiring high isolation voltage and low power dissipation in surface mount setups.
4N35
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 3120 V; Maximum Forward Current: .06 A; Configuration: SINGLE; Maximum Dark Current: 500000 nA; No. of Elements: 1;
TLP292-4(GB-TP,E(T
Toshiba's TLP292-4(GB-TP,E(T) is a 4-channel optocoupler with max. forward current of 0.05A, min. transfer ratio of 100%, and max. isolation voltage of 3750V. Ideal for AC input-transistor output applications due to its high collector-emitter breakdown voltage, surface mount feature, and compact plastic packaging.
TLP181
Toshiba TLP181 is a single optocoupler with max forward current of 0.02A, ideal for applications requiring high isolation voltage up to 3750V. With a min C-E breakdown voltage of 80V and surface mount feature, it operates b/w -55°C to 110°C efficiently.
CNY17-3X006
Vishay Intertechnology
Vishay Intertechnology's CNY17-3X006 is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring transistor output optocouplers in through-hole mounting configurations.
SFH6156-3-X001
Infineon Technologies
SFH6156-3-X001 by Infineon is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5300V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 100%.
CNY173SR2M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3;
PS2811-1-F3-A-L
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Forward Current: .05 A; Configuration: SINGLE; Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -55 Cel;
LTV-356T
Lite-on Technology
The Lite-on Technology LTV-356T is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 3750V. With a fast response time of 0.000018s and surface mounting feature, it offers reliable performance in various electronic circuits.
FOD817C
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Power Dissipation: .15 W; Maximum Operating Temperature: 110 Cel;
TLP293-4(TPE(T
Toshiba's TLP293-4(TPE(T is a transistor output optocoupler with max. forward current of 0.05A, operating temp. range from -55 to 125°C, and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable optical coupling in industrial electronics.
SFH615A-2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: UL RECOGNIZED; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Dark Current: 50 nA;
MOCD207VM
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SEPARATE, 2 CHANNELS; JESD-609 Code: e3; Additional Features: UL APPROVED, VDE APPROVED; No. of Elements: 2;
SFH6156-4
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel;
CNY17-3
Optek Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Maximum Power Dissipation: .15 W;
FOD817CSD
FOD817CSD by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000V. With a fast response time of 18μs, it is suitable for surface mounting in various electronic circuits needing reliable transistor output optocouplers.
MOC223M
The Onsemi MOC223M is a single optocoupler with a Darlington output, featuring a max forward current of 0.06 A and an isolation voltage of 2500 V. With a min operating temperature of -40°C and mounting feature for surface mount applications, it is ideal for use in high-power electronic circuits requiring reliable signal isolation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FODM8801CR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Operating Temperature: 125 Cel; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -40 Cel;
FODM8801CR2V by Onsemi is a single optocoupler with a max forward current of 0.02A and min operating temperature of -40°C. With a nominal current transfer ratio of 330%, it is ideal for applications requiring high isolation voltage up to 3750V, such as in power supplies and industrial controls.
FODM8801CR2
FODM8801CR2 by Onsemi is a single optocoupler with a max forward current of 0.02A and min CTR of 100%. With a breakdown voltage of 75V, it's ideal for applications requiring high isolation voltage and fast response time in temperatures ranging from -40 to 125°C.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); No. of Elements: 1; Minimum Current Transfer Ratio: 100 %; Configuration: SINGLE;
FODM124R2
FODM124R2 by Onsemi is a single optocoupler with max forward current of 0.05A, operating temp range -40 to 100°C, and isolation voltage of 3750V. Ideal for applications requiring high isolation voltage and low power dissipation in surface mount configurations.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Configuration: SINGLE; No. of Elements: 1; JESD-609 Code: e3;
FODM8801CV by Onsemi is a single optocoupler with a max forward current of 0.02A and min operating temperature of -40°C, ideal for applications requiring high isolation voltage up to 3750V. With a fast response time of 0.00002s and surface mounting feature, it offers reliable performance in various electronic circuits.
FODM124R2V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 80 V; Nominal Current Transfer Ratio: 100 %;
FODM8801C
The Onsemi FODM8801C is a single optocoupler with a max forward current of 0.02A and min operating temperature of -40°C, ideal for applications requiring high isolation voltage up to 3750V. With a fast response time of 0.00002s and high current transfer ratio of 330%, it is suitable for surface mount configurations in various electronic circuits.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Current Transfer Ratio: 100 %; Maximum Forward Current: .02 A;
FODM121AR2
FODM121AR2 by Onsemi is a single optocoupler with a max forward current of 0.05A and min C-E breakdown voltage of 80V. With a high isolation voltage of 3750V, it's ideal for applications requiring reliable signal transmission in harsh environments. Suitable for surface mounting, this transistor output optocoupler has a low dark current of 100nA and operates b/w -40°C to 100°C.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .05 A; Configuration: SINGLE;
FODM2705R2
FODM2705R2 by Onsemi is a single optocoupler with max forward current of 0.05A, operating temp range -40 to 100°C, and isolation voltage of 3750V. Ideal for AC input-transistor output applications in surface mount configurations.
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Collector-emitter Breakdown Voltage: 40 V; Maximum Isolation Voltage: 3750 V; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 100 nA;
FODM124
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -40 Cel; Maximum Dark Current: 100 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Nominal Current Transfer Ratio: 100 %; Maximum Forward Current: .05 A; Additional Features: UL APPROVED;
FODM121AR2V
FODM121AR2V by Onsemi is a single optocoupler with a max forward current of 0.05A and min C-E breakdown voltage of 80V. With a high isolation voltage of 3750V, it's ideal for applications requiring reliable signal transmission in harsh environments. Suitable for surface mounting, this transistor output optocoupler has a low dark current of 100nA and operates b/w -40°C to 100°C.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Dark Current: 100 nA; Nominal Current Transfer Ratio: 100 %; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 80 V;
FODM121FV
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Dark Current: 100 nA; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Nominal Current Transfer Ratio: 100 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved