Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PHOTO TRANSISTOR; Nominal Light Current: 1 mA; Maximum Operating Temperature: 100 Cel; Shape: ROUND; Maximum Dark Current: 200 nA; Additional Features: DAYLIGHT FILTER, HIGH RELIABILITY;
Median Price
$0.252
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Newark
1+ parts
$0.129
100+ parts
1k+ parts
10k+ parts
Adafruit Industries
$0.261
$0.240
$0.225
-
DigiKey
$0.640
$0.320
$0.248
$0.205
EBV Elektronik
RS (Exports)
Verical
$0.242
Arrow
$0.241
Farnell
$0.267
$0.208
TTI
$0.177
Rochester
$0.203
$0.169
$0.150
Element14
$0.449
$0.423
Bürklin Elektronik
Digiode
$0.055
Nova Conductors
$0.227
TME
$0.590
$0.294
$0.211
$0.170
NAC Semi
$0.626
Vyrian
ComSIT Distribution GmbH
ComSIT USA
Rutronik
$0.173
ACDS - Activité Composants Distribution Service
Bristol Electronics
Huijzer Components
EMSNET
ECAB
Electronics Depot
North Shore Components
Semicontronic
$0.049
$0.048
Ampacity Inc.
Corphita
$0.052
Continental Prestige Electronics
$0.220
Argo Parts USA
$0.218
Modulus Dynamics
$0.226
$0.217
Aztec Data Supply Inc.
$0.233
Perfect Parts
GreenTree Electronics
Kepictronics
Metaverse IC Inc.
Cyclops Electronics Ltd (Excess)
Authorized Procurement Solutions
Glotronic Ltd.
Assy Fe
Netroflash
$0.223
$0.216
Robosynatics
Corohmni
Phototransistors SFH309FA-4 attributes and parameters. Explore more Phototransistors devices from Siemens
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Maximum Dark Current:
Infrared (IR) Range:
Nominal Light Current:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Shape:
Size:
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Surge Components
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
Temic Semiconductors
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Micro Commercial Components
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
BPV11
Vishay Telefunken
PHOTO TRANSISTOR; Minimum Collector-emitter Breakdown Voltage: 70 V; Peak Wavelength (nm): 850; Maximum Dark Current: 50 nA; Nominal Light Current: 10 mA; Infrared (IR) Range: YES;
SFH303-4
Infineon Technologies
PHOTO TRANSISTOR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Size: 5 mm; Peak Wavelength (nm): 850; Maximum Power Dissipation: .2 W;
BP103BF4
Photo Transistors; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Power Dissipation: .2 W; Maximum Dark Current: 100 nA; Maximum On State Current: .05 A;
SFH3219-Z
Osram Opto Semiconductors
SFH3219-Z by Osram Opto Semiconductors is a single phototransistor with a peak wavelength of 990nm. It operates b/w -40°C to 100°C, with a nominal light current of 0.063mA and max dark current of 50nA. Ideal for applications requiring infrared detection in compact spaces due to its small size of 2.575mm.
BPX43
Photo Transistors; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Dark Current: 300 nA; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e0;
SFH3211FA
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; No. of Functions: 1; Maximum On State Current: .015 A;
BP103
Infineon Technologies' BP103 phototransistor operates b/w -40°C to 80°C with peak wavelength of 850nm. It has a max on-state current of 0.1A and dark current of 100nA, making it ideal for through-hole mounting applications.
SFH320-3
SFH320-3 by Infineon Technologies is a single phototransistor with peak wavelength of 860nm. It operates b/w -40 to 100°C, dissipating max power of 0.165W. Ideal for applications requiring fast response time and low dark current in IR range.
QSD722
QSD722 by Onsemi is a single phototransistor with peak wavelength of 880nm. It operates b/w -40 to 100 °C, with max power dissipation of 0.1W. Ideal for IR applications due to its fast response time of 6μs and collector-emitter breakdown voltage of 30V.
SFH350F
Photo Transistors; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 900; Maximum Response Time: .000015 s; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
TEST2600
Vishay Intertechnology
TEST2600 by Vishay Intertechnology is a single phototransistor with peak wavelength of 920nm. It operates b/w -40°C to 85°C, with max power dissipation of 0.1W. Ideal for applications requiring infrared detection and collector-emitter breakdown voltage of 70V in through hole mounting setups.
SFH300FA2
Photo Transistors; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 900; Maximum Response Time: .0000075 s; JESD-609 Code: e0;
QSE113E3R0
PHOTO TRANSISTOR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .1 W; Nominal Light Current: .25 mA; Infrared (IR) Range: YES;
PH103
PHOTO DARLINGTON; Mounting Feature: THROUGH HOLE MOUNT; Maximum Power Dissipation: .1 W; Size: 5 mm; Maximum On State Current: .05 A; Nominal Light Current: 12 mA;
LTR-4206
Lite-on Technology
The Lite-on Technology LTR-4206 is a 3mm round photo transistor with max temp of 85°C and min temp of -40°C. It has nominal light current of 4mA, dark current of 100nA, and response time of 0.000005s. Ideal for optoelectronic applications requiring through hole mounting in the IR range.
SFH320-3/-4
Photo Transistors; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Dark Current: 200 nA; Peak Wavelength (nm): 860; Maximum Response Time: .000008 s;
BP103B3
Photo Transistors; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum On State Current: .05 A; Peak Wavelength (nm): 850;
TIL604HR2
TIL604HR2 by Texas Instruments is a single phototransistor with peak wavelength of 900nm. It operates b/w -60°C to 125°C, with max power dissipation of 0.05W. Ideal for applications requiring fast response time and IR detection in through-hole mounting setups.
TIL623
Photo Transistors; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .000008 s; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
OP505A
Optotek
PHOTO TRANSISTOR; Mounting Feature: THROUGH HOLE MOUNT; Shape: ROUND; Maximum Power Dissipation: .1 W; Infrared (IR) Range: YES; Nominal Light Current: 4.3 mA;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SFH309FA-4
SFH309FA-4 by Infineon Technologies is a phototransistor with a peak wavelength of 900nm. It can operate in temperatures ranging from -55°C to 100°C and has a max power dissipation of 0.165W. This through-hole mount device is commonly used in applications requiring fast response times and low dark current.
PHOTO TRANSISTOR; Mounting Feature: RADIAL MOUNT; Terminal Finish: TIN; Infrared (IR) Range: YES; No. of Functions: 1; Maximum Power Dissipation: .165 W;
SFH3015FA
Osram Opto Semiconductors' SFH3015FA is a single phototransistor with peak wavelength of 870nm. It operates b/w -25°C to 85°C, featuring a nominal light current of 100mA and max dark current of 50nA. Ideal for applications requiring infrared detection, it has a min collector-emitter breakdown voltage of 15V and can handle a max on state current of 0.015A.
SFH309FA
SFH309FA by Infineon Technologies is a phototransistor with peak wavelength of 900nm, max operating temp of 100°C, and min operating temp of -55°C. Ideal for applications requiring through hole mounting, it has a max on state current of 0.015A and max dark current of 200nA.
PHOTO TRANSISTOR; Mounting Feature: RADIAL MOUNT; Terminal Finish: BRIGHT TIN OVER NICKEL; Nominal Light Current: .4 mA; Maximum Power Dissipation: .165 W; JESD-609 Code: e3;
Siemens
PHOTO TRANSISTOR; Infrared (IR) Range: YES; Peak Wavelength (nm): 900; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 200 nA; Size: 3 mm;
PHOTO TRANSISTOR; Nominal Light Current: .063 mA; Shape: ROUND; Size: 2.575 mm; Maximum Operating Temperature: 100 Cel; Configuration: SINGLE;
SFH3710-Z
PHOTO TRANSISTOR; Terminal Finish: MATTE TIN OVER NICKEL; Size: 1.4 mm; Shape: RECTANGULAR; Infrared (IR) Range: NO; Peak Wavelength (nm): 570;
SFH309FA-4/5
PHOTO TRANSISTOR; Mounting Feature: RADIAL MOUNT; Terminal Finish: TIN; Nominal Light Current: 1 mA; Maximum On State Current: .015 A; Maximum Power Dissipation: .165 W;
SFH3710
PHOTO TRANSISTOR; Mounting Feature: SURFACE MOUNT; Configuration: SINGLE; Shape: SQUARE; Packing Method: TR, 7 INCH; Maximum Dark Current: 50 nA;
SFH313FA
Photo Transistors; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Dark Current: 200 nA; Maximum On State Current: .05 A; Maximum Operating Temperature: 100 Cel;
PHOTO TRANSISTOR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Size: 5 mm; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
PHOTO TRANSISTOR; Additional Features: DAYLIGHT FILTER; Infrared (IR) Range: YES; Minimum Operating Temperature: -55 Cel; Size: 5 mm; No. of Functions: 1;
SFH300FA
SFH300FA by Infineon Technologies is a phototransistor with peak wavelength of 870nm, max operating temp of 100°C, and min operating temp of -40°C. It has a max on state current of 0.05A and terminal finish of Sn/Pb. Ideal for applications requiring precise light detection in environments with varying temperatures.
PHOTO TRANSISTOR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Peak Wavelength (nm): 880; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel;
PHOTO TRANSISTOR; Size: 5 mm; Configuration: SINGLE; No. of Functions: 1; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel;
SFH3400-Z
PHOTO TRANSISTOR; Minimum Collector-emitter Breakdown Voltage: 20 V; No. of Functions: 1; Infrared (IR) Range: YES; Configuration: SINGLE; Shape: SQUARE;
SFH3710-3/4-Z
PHOTO TRANSISTOR; Minimum Operating Temperature: -40 Cel; Configuration: SINGLE; Infrared (IR) Range: NO; Maximum Dark Current: 50 nA; Peak Wavelength (nm): 570;
SFH313FA-3/4
The Osram Opto Semiconductors SFH313FA-3/4 is a 5mm phototransistor with peak wavelength of 870nm. It operates b/w -40 to 100°C, with max power dissipation of 0.2W and response time of 0.000014s. Ideal for applications requiring fast light detection in IR range, such as optical sensors and proximity detectors.
SFH309F-3
PHOTO TRANSISTOR; Terminal Finish: Tin (Sn); Infrared (IR) Range: YES; No. of Functions: 1; Minimum Operating Temperature: -40 Cel; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved