Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SKKH162/16E by Semikron International is a Silicon Controlled Rectifier with 1600V repetitive peak reverse voltage and 4700A non-repetitive peak on-state current. It features a max DC gate trigger current of 150mA, making it suitable for applications requiring high power switching capabilities. With a package style of flange mount and UL recognized reference standard, this SCR is ideal for industrial equipment and power control systems.
Median Price
$82.240
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Newark
1+ parts
$66.610
100+ parts
$58.620
1k+ parts
-
10k+ parts
RS Americas
$63.320
RS (Exports)
$103.630
Nova Conductors
$71.540
Forefront Electronics and Design
$85.750
Chip Stock
Vyrian
Fibra_Brandt Electronic GMBH
Dan-Mar Components
Bristol Electronics
Cogito LLC
ComSIT Distribution GmbH
Aztec Data Supply Inc.
$2.880
AZTECH Wire
$8.888
Continental Prestige Electronics
$65.339
$64.032
Aranea Global
$70.109
$67.305
Allen Electronics Distributors
$83.450
Argo Parts USA
Infinite Electronics LLP (Excess)
Kepictronics
Corohmni
Assy Fe
Having a high gate trigger current allows for better control over when the SCR turns on, ensuring precision in operation.
The built-in diode simplifies circuit design and saves on external components, making it a more efficient and cost-effective choice.
High peak on-state current capability allows for handling of large currents during peak loads, making it suitable for heavy-duty applications.
Rectangular package shape is convenient for mounting and installing in various electronic devices and systems.
High on-state current rating ensures the SCR can handle substantial electrical loads without overheating or malfunctioning.
Quick connects make for easy and secure connections, simplifying installation and maintenance processes.
Low leakage current helps in conserving power and preventing unnecessary energy wastage in standby or off states.
High reverse voltage capability ensures reliable performance and protection against voltage spikes or reverse polarity conditions.
Low off-state leakage current minimizes power loss and improves efficiency in standby mode or when the SCR is not conducting.
With five terminals, this SCR offers flexibility in circuit connections and configurations, allowing for versatile usage in different applications.
Flange mount package style ensures secure and stable mounting of the SCR in various equipment or systems, enhancing reliability and durability.
High maximum operating temperature rating allows for the SCR to function reliably in demanding environments with elevated temperatures.
As a Silicon Controlled Rectifier, this device provides controlled and precise switching capabilities, suitable for power control applications.
Low minimum operating temperature ensures the SCR can operate effectively in cold or freezing conditions without performance degradation.
Tin silver terminal finish provides good conductivity and corrosion resistance, prolonging the lifespan and reliability of the SCR.
Upper terminal position facilitates easy and convenient connection to external circuits or components, improving overall installation efficiency.
High RMS on-state current rating allows for continuous and stable operation under normal load conditions, ensuring reliability and performance consistency.
Low gate trigger voltage requirement enables easy and efficient control of the SCR, reducing drive circuit complexity and power consumption.
Isolated case connection enhances safety and prevents electrical interference or short circuits, ensuring stable and secure operation.
High off-state voltage capability provides robust insulation and protection against voltage transients, enhancing the SCR's reliability and durability.
High critical rate of rise of off-state voltage ensures fast and reliable response to voltage changes or transient events, enhancing the SCR's performance in dynamic environments.
High holding current capacity ensures the SCR remains in the on-state even after the gate signal is removed, providing stable and continuous operation.
Screw terminals allow for secure and reliable connections, making it easy to interface with external circuits or components for efficient operation.
Fast turn-off time ensures quick and precise control over the SCR's switching behavior, reducing the risk of overvoltage or current spikes.
UL recognition signifies compliance with safety and quality standards, ensuring the SCR meets industry requirements for reliable and safe operation.
Silicon Controlled Rectifiers (SCR) SKKH162/16E attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from Semikron International
Additional Features:
Case Connection:
Nominal Circuit Commutated Turn-off Time:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Quick Connects Description:
Screw Terminals Description:
Maximum Holding Current:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum On-state Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Reference Standard:
Maximum Repetitive Peak Off-state Leakage Current:
Repetitive Peak Off-state Voltage:
Repetitive Peak Reverse Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
SKKH162/16E Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Semikron Danfoss is a family-owned business, merged by SEMIKRON and Danfoss Silicon Power in 2022. In a world that is going electric, Semikron Danfoss technologies are more relevant than ever. With our innovative solutions for automotive, industrial and renewable applications we help the world utilize energy more efficiently and sustainable and thus to significantly reduce overall CO2 emissions – one of the biggest challenges the world faces today. Our power electronics product offerings include semiconductor devices, power modules, stacks and systems. We take care of our employees and create value for our customers by investing significantly in innovation, technology, capacity, and service to deliver best-in-industry performance and for a sustainable future.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Mercury Systems
Continental Device India
Changzhou Galaxy Century Microelectronics
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TIC126S
Texas Instruments
TIC126S by Texas Instruments is a Silicon Controlled Rectifier with 20mA DC Gate Trigger Current, 100A Non Repetitive Peak On-state Current, and 7.5A Max On-state Current. It is used in applications requiring high current switching such as motor control systems and power supplies due to its robust performance and wide operating temperature range from -40°C to 125°C.
MCR100-8
Taiwan Semiconductor
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Terminals: 3;
Micro Electronics
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Form: THROUGH-HOLE;
2N1595
Comset Semiconductors
SCR; Surface Mount: NO; Minimum Operating Temperature: -65 Cel; Maximum Operating Temperature: 125 Cel; Maximum DC Gate Trigger Current: 10 mA; Non Repetitive Peak On-state Current: 15 A;
S1M
Hutson Industries
70TPS16
SCR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; JESD-609 Code: e0;
MCC200-18IO1
IXYS Corporation
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Case Connection: ISOLATED;
MCC132-16IO1
40TPS12A
Vishay Semiconductors
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; JEDEC-95 Code: TO-247AC;
CLA100E1200HB
Littelfuse
SCR;
2N888
2N888 by Texas Instruments is a Silicon Controlled Rectifier with max DC Gate Trigger Current of 0.02 mA, Non Repetitive Peak On-state Current of 20 A, and Max On-state Current of 0.35 A. It is used in applications requiring SCR technology, such as power control circuits and motor drives.
BT148-600R,127
BT148-600R,127 by NXP Semiconductors is a single silicon controlled rectifier (SCR) with a max on-state current of 2.5A and a repetitive peak reverse voltage of 600V. It is commonly used in applications requiring rectification and control of AC power.
2N6508TG
Onsemi
2N6508TG by Onsemi is a single SCR with max. on-state current of 16A, non-repetitive peak on-state current of 250A, and max. DC gate trigger current of 30mA. It is used in applications requiring high power control such as motor drives, lighting controls, and industrial equipment due to its robust design and high operating temperature range from -40°C to 125°C.
EC103D1
The NXP Semiconductors EC103D1 is a single SCR with a max on-state current of 0.5A and non-repetitive peak on-state current of 9A. It has a repetitive peak reverse voltage of 400V, making it suitable for applications requiring precise power control in electronic circuits.
TIC60
TIC60 by Texas Instruments is a single SCR with a max DC gate trigger current of 0.2 mA and non-repetitive peak on-state current of 6 A. It is used in applications requiring a trigger device with a repetitive peak reverse voltage of 30 V, such as power control circuits for electrical appliances.
TT190N18SOFHPSA1
Infineon Technologies
Infineon's TT190N18SOFHPSA1 is a Silicon Controlled Rectifier with 1800V repetitive peak reverse voltage and 275A max RMS on-state current. It features a series connected, center tap configuration with 2 elements, ideal for high-power applications in industrial systems. Operating temperature ranges from -40°C to 125°C, meeting IEC-747-6 and UL standards.
C106MG
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ANODE;
S2M
SCR; Surface Mount: NO; Maximum DC Gate Trigger Voltage: .8 V; Maximum Leakage Current: .1 mA; Non Repetitive Peak On-state Current: 20 A; Minimum Operating Temperature: -40 Cel;
TT250N18KOFHPSA1
Infineon's TT250N18KOFHPSA1 is a 1800V SCR with 410A RMS current. It features 200mA DC gate trigger, isolated case connection, and UL recognition. Ideal for high-power applications requiring reliable switching in series-connected configurations.
L522F
Crydom
The Crydom L522F is a 2-element SCR with max. on-state current of 27A and non-repetitive peak on-state current of 300A. It has a max DC gate trigger current of 60mA, making it suitable for applications requiring high power control such as industrial machinery and motor drives. The device operates in temperatures ranging from -40°C to 125°C, meeting UL standards for reliability and safety.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SKKH92/16E
Semikron International
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE WITH BUILT-IN DIODE; Case Connection: ISOLATED;
SKKH106/16E
SKKH570/16E
SKKH92/12E
SKKH106/12E
SKKH106/12E by Semikron International is a Silicon Controlled Rectifier with a max on-state current of 106A and non-repetitive peak on-state current of 2300A. It features a max DC gate trigger voltage of 3V, making it suitable for applications requiring high power switching in industrial settings.
SKKH92/08E
SKKH92/08E by Semikron is a single SCR with built-in diode, featuring 2000A non-repetitive peak on-state current and 95A max on-state current. Ideal for applications requiring high power control such as industrial motor drives or power supplies.
SKKH92/18E
SKKH27/12E
SKKH92/08D
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE WITH BUILT-IN SERIES DIODE; Case Connection: ISOLATED;
SKKH92/14E
SKKH161/12E
SKKH161/14E
SKKH161/16E
SKKH162/08D
SKKH162/12E
SKKH162/14E
SKKH162/18E
SKKH162/08E
SKKH162/20EH4
SKKH162/22EH4
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved