Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 40 mA; Terminal Finish: Tin/Lead (Sn/Pb); Repetitive Peak Off-state Voltage: 400 V; Maximum On-state Voltage: 1.8 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Problanco Electronics
TANS Electronics
Kulean Microsystems
Corphita
SupplyDigital Components
Corohmni
UHIMA Technologies
Triode For Alternating Current (TRIAC) SYAL224 attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Semiconductors
Minimum Critical Rate of Rise of Commutation Voltage:
Maximum DC Gate Trigger Current:
Maximum Holding Current:
JESD-609 Code:
Maximum Leakage Current:
Maximum On-state Voltage:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Trigger Device Type:
SYAL224 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Hi-tron Semiconductor
Weitron Technology
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Diodes Incorporated
T1650H-6G
STMicroelectronics
T1650H-6G by STMicroelectronics is a single TRIAC with 16A RMS on-state current, 600V repetitive peak off-state voltage, and 50mA max DC gate trigger current. It is a snubberless TRIAC suitable for AC power control applications in various industries.
TG35C60
Sansha Electric Mfg
TRIAC; Screw Terminals Description: 0; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Maximum Leakage Current: 5 mA; Maximum DC Gate Trigger Voltage: 3 V;
NYT6-5D6DTG
NYT6-5D6DTG by Onsemi is a TRIAC with max DC gate trigger current of 10mA, leakage current of 0.001mA, and max operating temp of 110 °C. Ideal for AC applications requiring a trigger device, it has a max RMS on-state current of 6A and repetitive peak off-state voltage of 600V.
DTA8E
DTA8E by Onsemi is a TRIAC with 1.6V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -30 °C to 125°C, suitable for AC power control applications like dimmers and motor speed controllers.
BTA12-700CWRG
BTA12-700CWRG by STMicroelectronics is a TRIAC with 1.6V max on-state voltage, 35mA max DC gate trigger current, and 150°C max operating temperature. Ideal for AC power control applications due to its 12A max RMS on-state current and 700V repetitive peak off-state voltage capabilities.
Z0107MN
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
DTC12E-N
DTC12E-N by Onsemi is a TRIAC with 1.5V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -45 °C to 125°C, suitable for applications requiring up to 12A RMS on-state current such as AC power control systems.
TIC215D
TIC215D by Texas Instruments is a TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 3A. Ideal for applications requiring precise AC power control like dimmers, motor speed controllers, and heating regulators due to its 4-quadrant logic level TRIAC configuration.
DTC12N
DTC12N by Onsemi is a TRIAC with 1.5V max on-state voltage, 30mA max DC gate trigger current, and 12A max RMS on-state current. Ideal for AC power control applications due to its 600V repetitive peak off-state voltage and TRIAC trigger device type.
DTB10G
The Onsemi DTB10G is a TRIAC with 1.3V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. It operates at up to 125 °C and has a repetitive peak off-state voltage of 600V. Ideal for AC power control applications requiring up to 10A RMS on-state current.
BTA16-600CW3G
Littelfuse
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTA25-600B
Continental Device India
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
BT136-800E
NXP Semiconductors
BT136-800E by NXP Semiconductors is a TRIAC with 800V repetitive peak off-state voltage, 4A max RMS on-state current, and 10mA max DC gate trigger current. Ideal for applications requiring precise AC power control such as dimmers, motor speed controllers, and heating control systems.
TIC226B
TIC226B by Texas Instruments is a single TRIAC with 3 terminals, featuring a max RMS on-state current of 8A and a repetitive peak off-state voltage of 200V. Ideal for applications requiring 4-quadrant logic level TRIACs, it operates b/w -40 to 110°C and has a max DC gate trigger voltage of 2.5V.
L401E5
Loras Industries
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Minimum Critical Rate of Rise of Commutation Voltage: 1 V/us;
MAC97A4
MAC97A4 by Onsemi is a TRIAC with 3 terminals and a max DC gate trigger current of 5 mA. It operates in temperatures ranging from -40 to 110 °C, with a repetitive peak off-state voltage of 200 V. Ideal for applications requiring precise switching control in various electronic devices.
TIC216A
TIC216A by Texas Instruments is a single TRIAC with 3 terminals. It has a max DC gate trigger current of 5mA and max RMS on-state current of 6A. Ideal for applications requiring 4-quadrant logic level TRIACs, operating b/w -40 to 110°C, with a repetitive peak off-state voltage of 100V.
MAC97-8RLRM
MAC97-8RLRM by Onsemi is a TRIAC with 1.9V max on-state voltage, 0.6A max RMS current, and 600V repetitive peak off-state voltage. It operates b/w -40 to 110 °C and is ideal for AC power control applications due to its high gate trigger current of 10mA.
ACS120-7ST
ACS120-7ST by STMicroelectronics is a TRIAC with max. DC gate trigger current of 10mA, non-repetitive peak on-state current of 20A, and max. RMS on-state current of 2A. It is used in applications requiring snubberless TRIACs for AC switching operations at temperatures ranging from -30°C to 125°C.
TIC263A
TIC263A by Texas Instruments is a TRIAC with 25A RMS current, 100V repetitive peak off-state voltage, and 2.5V DC gate trigger voltage. It operates b/w -40°C to 125°C, making it suitable for AC power control applications like dimmers and motor speed controllers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Semiconductors
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved