Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IPBT-103-H1-T-D-RA-GP by Samtec is a power connector with 6 contacts, made of copper alloy. It has a body length of 1.042" and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its right angle receptacle design and solder termination.
Median Price
$2.020
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.540
1k+ parts
$1.390
10k+ parts
$1.170
DigiKey
$1.560
$1.482
-
Nova Conductors
$1.959
Vyrian
QIE Inc.
AZTECH Wire
$1.340
$1.290
$1.260
$1.240
Netroflash
$1.920
Authorized Procurement Solutions
The compact body length of 1.042 inch makes this power connector suitable for applications where space is limited.
The TIN OVER NICKEL contact finish provides excellent corrosion resistance and ensures a reliable electrical connection.
With a high maximum operating temperature of 105 °C, this power connector can withstand elevated temperatures without any performance issues.
The insulator made of LIQUID CRYSTAL POLYMER offers excellent thermal stability and electrical insulation properties.
The availability of 6 contacts allows for multiple connection points, making this power connector versatile and suitable for various applications.
Power Connectors IPBT-103-H1-T-D-RA-GP attributes and parameters. Explore more Power Connectors devices from Samtec
Additional Features:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
IPBT-103-H1-T-D-RA-GP Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
EU2B-YS3303C
Idec
ROTARY SWITCH;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Brightking
American Power Devices
170351-0003
Molex
The Molex 170351-0003 power connector features polyester insulator, operating temperatures from -40 to 105°C, and UL flammability rating of 94V-0. It has 2 contacts, crimp termination, and is ideal for cable mounting applications requiring a female blade pin-skt receptacle.
1-480703-0
TE Connectivity 1-480703-0 is a power connector with dimensions of 1.066" x 0.527" x 1.07". It has an insulation resistance of 1000000000 ohm and a rated voltage of 600V, suitable for commercial applications requiring durable male connectors with crimp termination and panel mounting.
YLP-02V(NN)
J S T Mfg
YLP-02V(NN) by J S T Mfg is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. Featuring 2 contacts, it has a 94V-0 UL Flammability Code. Ideal for CABLE mounting, CRIMP termination, and FEMALE contact gender in PLUG body style applications.
43045-0214
The Molex 43045-0214 is a rectangular power connector with 2 rows, rated for 5A signal current. Featuring LCP insulator material and matte tin finish, it offers high durability with 30 cycles. Ideal for board mounting applications in commercial settings, this connector has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C.
43045-1018
Molex 43045-1018 is a rectangular power connector with 10 contacts, made of brass and LCP insulator. It has an insulation resistance of 1Gohm, withstands up to 1000VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
39-30-0200
Molex 39-30-0200 is a rectangular power connector with 20 contacts, made of brass and polyamide66. It has a dielectric voltage of 1500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL94V-0 flammability rating.
42816-0212
Molex 42816-0212 is a rectangular power connector with 2 contacts, rated at 50A. Featuring a dielectric voltage of 2200VAC and insulation resistance of 1G ohm, it is suitable for commercial applications requiring a reliable power connection in temperatures ranging from -40 to 105°C.
428193213
Molex 428193213 power connector features 1.33" body length, 1000000000 ohm insulation resistance, and 2200VAC dielectric voltage withstand. Ideal for commercial applications with -40 to 105°C operating range, UL-rated with matte tin finish and brass contacts for reliable signal current up to 50A on a single male connector.
15-06-0045
Molex 15-06-0045 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for cable and panel mounting in commercial applications requiring durable crimp termination.
39-01-2161
Molex 39-01-2161 is a rectangular power connector with 16 contacts, POLYAMIDE insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination in panel mounting setups. With UL certification and polarization key, it offers reliable connectivity for power systems.
43045-0224
Molex 43045-0224 is a rectangular power connector with 2 contacts, TIN/LEAD finish, and glass-filled LCP insulator. It has a body width of 0.29" and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability in commercial settings.
10-10-1033
The Molex 10-10-1033 is a rectangular power connector with 3 contacts, rated at 7A. It features a mating contact pitch of 0.2", insulation resistance of 500000000000 ohm, and dielectric voltage of 1500VDC. Ideal for board mounting applications in commercial settings due to its durability and reliability.
43045-1202
The Molex 43045-1202 is a rectangular power connector with 12 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability, polarization key, and UL flammability rating of 94V-0.
1-480705-0
TE Connectivity's 1-480705-0 Power Connector features POLYAMIDE insulator, 6 contacts, and 105°C max operating temp. Ideal for commercial applications, this male connector with crimp termination is designed for panel mounting with a straight body style.
39-03-6060
Molex 39-03-6060 is a rectangular power connector with 6 contacts, insulation resistance of 1Gohm, and dielectric voltage of 2100VAC. It is used in commercial applications for cable mounting with crimp termination, featuring a female contact gender and natural insulator color.
50-29-1758
Molex 50-29-1758 is a rectangular power connector with 0.63"x.2"x.78" dimensions, POLYAMIDE insulator, and 4 contacts for panel mounting. It features UL94V-2 flammability rating and is ideal for commercial applications requiring reliable female crimp connectors with locking mounting option.
43045-0815
The Molex 43045-0815 is a rectangular power connector with 8 contacts, featuring liquid crystal polymer insulator and brass contact material. It has an insulation resistance of 1G ohm, dielectric voltage of 1000VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with high reliability.
DF22R-2P-7.92DSA(05)
Hirose Electric
DF22R-2P-7.92DSA(05) by Hirose Electric is a power connector with 2 contacts, male blade pin-skt style. It has GLASS FILLED POLYAMIDE insulator, Tin/Copper termination finish, and operates b/w -35 to 85°C. Ideal for board mounting applications requiring UL 94V-0 compliance.
1-917808-2
TE Connectivity 1-917808-2 is a RECTANGULAR POWER CONNECTOR with POLYBUTYLENE TEREPHTHALATE insulator. It has 4 contacts, operates b/w -55 to 105 °C, and offers high insulation resistance of 1 Gohm. Ideal for power applications requiring reliable male crimp terminals in commercial settings.
3-794630-6
TE Connectivity 3-794630-6 is a Power Connector with 0.118" Mating Contact Pitch, rated for 250V and 5A current. Featuring Matte Tin finish, it has POLYAMIDE insulator and UL94V-0 flammability rating. Ideal for board mounting applications in commercial settings due to its reliability and polarization key feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IPBT-105-H2-T-D-K
Samtec
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: BLACK;
IPBT-105-H2-T-D
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0;
IPBT-105-H2-T-D-GP
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
IPBT-104-H1-T-D-RA-K
Samtec's IPBT-104-H1-T-D-RA-K is a power connector with 8 contacts. It features liquid crystal polymer insulator, matte tin over nickel mating contact finish, and copper alloy contact material. Ideal for board mounting applications requiring male gendered solder termination connectors.
IPBT-102-H1-T-S-RA-K
The Samtec IPBT-102-H1-T-S-RA-K is a rectangular power connector with liquid crystal polymer insulator. It has 2 contacts, matte tin over nickel finish, and operates b/w -55°C to 105°C. Ideal for board mounting in commercial applications requiring reliable power connections.
IPBT-102-H1-T-D-RA-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; MIL Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
IPBT-102-H1-T-D-K
Samtec's IPBT-102-H1-T-D-K is a power connector with liquid crystal polymer insulator, matte tin over nickel finish, and copper alloy contacts. It has 4 contacts arranged in S0P4 for board mounting applications. Operating temperature range from -55 to 105°C makes it suitable for commercial use.
IPBT-102-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; JESD-609 Code: e3; IEC Conformity: NO;
IPBT-110-H1-T-D-K
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .424 inch;
IPBT-102-H1-T-S-RA
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .259 inch;
IPBT-102-H1-T-S-RA-GP
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Empty Shell: NO; MIL Conformity: NO;
IPBT-103-H1-T-S-RA-K
Samtec's IPBT-103-H1-T-S-RA-K is a rectangular power connector with 3 contacts. It features liquid crystal polymer insulator, tin finish with nickel barrier, and copper alloy contacts. Ideal for board mounting applications requiring male gendered solder termination connectors.
IPBT-110-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Manufacturer Series: IPBT; Termination Contact Finish: TIN OVER NICKEL;
IPBT-102-H2-T-S-K
Samtec's IPBT-102-H2-T-S-K is a rectangular power connector with 2 contacts. It features copper alloy contacts with matte tin over nickel finish. Ideal for board mounting applications requiring male contact gender and liquid crystal polymer insulator material.
IPBT-104-H1-T-D-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Empty Shell: NO;
IPBT-102-H2-T-S-GP
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: MATTE TIN OVER NICKEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; DIN Conformance: NO;
IPBT-108-H1-T-S-K
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: TIN OVER NICKEL; Manufacturer Series: IPBT;
IPBT-108-H1-T-S-RA-K
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
IPBT-105-H1-T-D-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105;
IPBT-103-H1-T-D-GP
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved