Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec ESHF-105-01-L-D-TH-LC is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05" and matte tin finish. Ideal for commercial applications, it has a temperature range from -55°C to 125°C and uses liquid crystal polymer insulator material.
Median Price
$2.359
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Classic Components Corporation
Corohmni
$1.548
Aztec Data Supply Inc.
$1.700
Continental Prestige Electronics
$2.324
$2.278
Argo Parts USA
Advanced Electronics
$2.724
$2.588
AZTECH Wire
$15.229
Netroflash
$2.312
$2.241
$2.194
Close contact pitch allows for high density connections, maximizing the use of available space on the board.
Optimal length for secure and stable connection without adding unnecessary bulk to the design.
Compact width facilitates easy integration into the layout while ensuring a secure fit.
Provides superior conductivity and protection against corrosion, ensuring long-lasting performance.
High-quality insulator material that offers excellent electrical insulation and temperature resistance.
Allows for multiple connections in a single connector, increasing versatility and functionality.
Can withstand high temperatures, making it suitable for a wide range of operating environments.
Durable and reliable contact material that ensures consistent performance over time.
Sleek and professional appearance that complements various board designs.
Provides ample connectivity options for multiple devices or components.
Headers & Edge Type Connectors ESHF-105-01-L-D-TH-LC attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Polarization Key:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
ESHF-105-01-L-D-TH-LC Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
FTSH-110-01-L-DV-K-A-P-TR
Samtec
The Samtec FTSH-110-01-L-DV-K-A-P-TR is a 20-contact board connector with a mating contact pitch of 0.05". It features tin termination finish, liquid crystal polymer insulator, and gold mating contact finish. Ideal for commercial applications requiring a reliable, straight-mount male connector with surface mount termination.
FTSH-105-01-L-DV-K-FR
Samtec's FTSH-105-01-L-DV-K-FR is a 10-contact, 2-row male board connector with tin finish and nickel barrier. Featuring a terminal pitch of 1.27mm, it is UL 94V-0 rated for surface mount applications. Ideal for use in headers & edge type connectors on PCBs.
52559-2052
Molex 52559-2052 FFC/FPC connector with 20 contacts, 0.020" pitch, and 39u plating thickness. Ideal for PCB applications requiring a mating contact pitch of 2.794mm, operating temperature range from -40 to 85°C, and UL94V-0 flammability rating.
307-074-442-278
Edac
Edac 307-074-442-278 is a CARD EDGE CONNECTOR with 74 contacts, 0.156" pitch, and 5A signal rating. It has a dielectric voltage of 2545VAC, operates b/w -40 to 105°C, and features FEMALE contact gender for WIRE WRAP termination.
SHR-03V-S-B
J S T Mfg
SHR-03V-S-B by J S T Mfg is a BOARD CONNECTOR with 3 contacts, rated for 1A signal current. Featuring a mating contact pitch of 0.039", it has an insulation resistance of 100M ohm and can withstand up to 500VAC. Ideal for applications requiring a compact header connector with high insulation properties and secure crimp termination.
43645-0400
Molex 43645-0400 is a board connector with 4 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring durable female connectors with crimp termination in black polyester insulator material.
5103309-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 10; Mixed Contacts: NO; UL Flammability Code: 94V-0;
1-1761606-3
TE Connectivity
TE Connectivity 1-1761606-3 is a 2-row, 40-contact board connector with a mating contact pitch of 0.1". Featuring POLYBUTYLENE TEREPHTHALATE insulator material and rated for up to 1A signal current, it is ideal for commercial applications requiring reliable connections in temperatures ranging from -65°C to 105°C.
5055960801
BOARD CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
B6BZR(LF)(SN)
B6BZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" mating contact pitch, 500VAC dielectric voltage, and 1A signal current rating. It is used in commercial applications, featuring GLASS FILLED POLYAMIDE insulation material and BRASS contact material for reliability.
B8B-XH-A(LF)(SN)
B8B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 8 contacts, 0.098" pitch, and 1000VAC dielectric voltage. It features POLYAMIDE66 insulation, BRASS contact material, and operates b/w -25 to 85 °C. Ideal for applications requiring a male SQ PIN-SKT contact style with solder termination.
FTSH-105-01-L-DV-K-A-P-FR
Samtec's FTSH-105-01-L-DV-K-A-P-FR is a 10-contact, 2-row male board connector with tin finish. Featuring a 1.27mm pitch, it is surface mountable and UL94V-0 rated. Ideal for applications requiring straight mounting of edge type connectors.
SIM8066-6-1-14-01-A
Global Connector Technology
SIM8066-6-1-14-01-A by Global Connector Technology is a PCB connector with 2 rows, 6 contacts, and insulation resistance of 1000000000 ohm. It has a dielectric voltage of 500VAC, operates b/w -40 to 85 °C, and is ideal for applications requiring a durable female connector with right-angle mounting.
50-37-5043
The Molex 50-37-5043 is a board connector with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 0.217" body width. It has a dual polarized polarization key and is rated for 3A signal current. This female receptacle connector with crimp termination is ideal for commercial applications requiring reliable connections in the temperature range of -40 to 105°C.
3415
3m Electronic Products Division
CARD EDGE CONNECTOR; DIN Conformance: NO; IEC Conformity: NO; MIL Conformity: NO;
02011602101
Harting Electronics & Kg
02011602101 by Harting Electronics & Kg is a 160-contact board euro connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring gold over nickel termination finish, it has an insulation resistance of 1T ohm and operates b/w -65 to 125°C. Ideal for commercial applications requiring high durability and reliability.
87438-0443
The Molex 87438-0443 is a board connector with 4 contacts, featuring a mating contact pitch of 0.059" and insulation resistance of 1G ohm. It has a body length of 0.287", operates b/w -55 to 105°C, and is ideal for commercial applications requiring a durable, polarized housing with matte tin finish.
S2B-PH-K-S(LF)(SN)
S2B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 800VAC dielectric voltage, and 2A signal current rating. Ideal for applications requiring a male connector with press fit termination, right angle mounting style, and natural insulator color.
2199230-4
TE Connectivity 2199230-4 is a CARD EDGE CONNECTOR with POLYETHYLENE insulator. It has 67 contacts, 0.02" pitch, and operates b/w -40 to 80°C. Ideal for board mounting applications requiring FEMALE compression contacts in a RIGHT ANGLE configuration.
SHR-06V-S-B
SHR-06V-S-B by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.039" pitch, suitable for cables with 0.015" min insulation diameter. With UL 94V-0 rating and 500VAC dielectric voltage, it's ideal for applications requiring high insulation resistance up to 100000000 ohm. The FEMALE connector has a rated current of 1A and operates b/w -25°C to +85°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ESHF-105-01-L-D-SM-K-TR
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2; Terminal Pitch (mm): 1.27;
ESHF-105-01-L-D-SM
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: PHOSPHOR BRONZE;
ESHF-105-01-L-D-SM-TR
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Row Spacing (inch): 0.05; JESD-609 Code: e3;
ESHF-105-01-L-D-SM-LC
ESHF-105-01-L-D-SM-LC by Samtec is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05", matte tin termination finish, and liquid crystal polymer insulator. It has a temperature range of -55 to 125°C and is ideal for commercial applications requiring a polarized housing and surface mount termination on rectangular PCB patterns.
ESHF-105-01-L-D-TH-TR
The Samtec ESHF-105-01-L-D-TH-TR is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05" and matte tin finish. Ideal for commercial applications, it has a temperature range of -55 to 125°C and uses liquid crystal polymer insulator material.
ESHF-105-01-L-D-TH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05;
ESHF-110-01-L-D-SM-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-1: LOCKING; Mounting Type: BOARD;
ESHF-110-01-L-D-SM-LC-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
ESHF-111-01-L-D-SM
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: BOARD;
ESHF-107-01-L-D-SM-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR; No. of Rows Loaded: 2;
ESHF-107-01-L-D-SM
The Samtec ESHF-107-01-L-D-SM is a 2-row board connector with 14 contacts, featuring a mating contact pitch of 0.05" and termination finish of matte tin over nickel. It has a body length of 0.75", width of 0.22", and depth of 0.215", suitable for applications requiring reliable surface mount connections in commercial environments at temperatures ranging from -55°C to 125°C.
ESHF-105-01-L-D-RA
Samtec ESHF-105-01-L-D-RA header connector features 0.05" contact pitch, LCP insulator, and matte tin finish. Ideal for board mounting applications with 2 rows of contacts, operating from -55°C to 125°C.
ESHF-110-01-L-D-SM-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 20; Mixed Contacts: NO; Mounting Style: STRAIGHT;
ESHF-111-01-L-D-SM-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 22; Minimum Operating Temperature: -55 Cel;
ESHF-110-01-L-D-SM
ESHF-110-01-L-D-SM by Samtec is a 20-contact board connector with 0.05" pitch, ideal for commercial applications. Featuring matte tin finish, liquid crystal polymer insulator, and phosphor bronze contacts, it operates b/w -55°C to 125°C. With a rectangular PCB contact pattern and surface mount termination, this male connector offers reliable performance in various electronic systems.
ESHF-105-01-F-D-TH-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05; Termination Type: SOLDER;
ESHF-110-01-L-D-SM-LC-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Terminal Pitch (mm): 1.27; Mounting Style: STRAIGHT;
ESHF-120-01-L-D-TH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; DIN Conformance: NO;
ESHF-120-01-L-D-TH-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Length: 1.4 inch; Contact Style: SQ PIN-SKT;
ESHF-105-01-L-D-RA-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Manufacturer Series: ESHF; Contact Material: PHOSPHOR BRONZE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved