Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec ESHF-105-01-F-D-TH-LC is a 2-row board connector with 0.05" contact pitch, ideal for commercial applications. Featuring liquid crystal polymer insulator and phosphor bronze contacts with gold finish, it offers reliable performance in temperatures ranging from -55°C to 125°C. With a total of 10 contacts and solder termination, this header connector is suitable for split board lock mounting.
Median Price
$2.960
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$2.910
1k+ parts
$2.250
10k+ parts
$2.070
Nova Conductors
$1.939
-
Vyrian
Continental Prestige Electronics
$1.900
Argo Parts USA
Netroflash
AZTECH Wire
$5.440
$5.220
$5.120
$5.020
The close pitch between mating contacts ensures a secure and reliable connection, minimizing the chance of signal interference or loss.
The compact body length saves space and allows for efficient placement on the board, ideal for applications with limited space availability.
The TIN over NICKEL finish provides excellent durability and corrosion resistance, ensuring a long-lasting and reliable connection.
The high maximum operating temperature allows for reliable performance even in environments with elevated temperatures.
The use of LIQUID CRYSTAL POLYMER as the insulator material provides excellent electrical insulation properties and resistance to heat.
Having two rows loaded increases the contact density, making this connector suitable for applications requiring multiple connections in a compact space.
The black insulator color provides a sleek and professional appearance, suitable for various electronic devices and applications.
PHOSPHOR BRONZE contact material offers high conductivity and durability, ensuring a stable and reliable connection over time.
The board mounting type allows for easy and secure installation on a circuit board, providing a stable and reliable connection.
The FLASH plating thickness provides a protective layer that enhances corrosion resistance and ensures a reliable connection.
Headers & Edge Type Connectors ESHF-105-01-F-D-TH-LC attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
ESHF-105-01-F-D-TH-LC Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Sangdest Microelectronics (Nanjing)
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
XHP-2
J S T Mfg
XHP-2 by J S T Mfg is a 2-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts, RECEPTACLE body style, and CRIMP termination. Ideal for CABLE mounting applications in Headers & Edge Type Connectors category.
FTSH-105-01-F-DV-K-A-P
Samtec
Samtec's FTSH-105-01-F-DV-K-A-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash finish and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, male straight pin-skt connector for surface mount termination on PCBs.
22-23-2061
Molex
The Molex 22-23-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring a reliable connection with solder termination and rectangular contact pattern.
22-28-5123
The Molex 22-28-5123 is a board connector with 12 contacts, rated at 4A signal current. It features a mating contact pitch of 0.1", insulation resistance of 50Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring durable connectors with solder termination and rectangular PCB contact pattern.
DT04-2P-E008
TE Connectivity
TE Connectivity's DT04-2P-E008 is a 2.251" x 0.675" x 0.67" board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a male contact gender with strain relief option.
53261-0571
The Molex 53261-0571 is a board connector with a mating contact pitch of 0.049", insulation resistance of 100MΩ, and a max operating temperature of 105°C. It is commonly used in applications requiring surface mount termination and right angle mounting options.
TSW-103-07-G-S
Samtec's TSW-103-07-G-S is a 3-contact board connector with gold over nickel termination, ideal for commercial applications. Featuring a mating contact pitch of 0.1", body dimensions of 0.3" x 0.098" x 0.1", and operating temperatures from -55°C to 125°C, it offers reliable connectivity in various electronic devices. The connector's UL-certified insulator material and rectangular PCB contact pattern make it suitable for use in black-colored assemblies requiring high flammability resistance.
XHP-11
XHP-11 by J S T Mfg is a BOARD CONNECTOR with 11 contacts, UL 94V-0 rated. It features FEMALE contacts for CABLE mounting with CRIMP termination. Ideal for applications requiring reliable edge type connectors in electronic assemblies.
09185106324
Harting Electronics & Kg
09185106324 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000 ohm, and Body Length of 0.807". It is used in BOARD EURO CONNECTOR applications, featuring POLARIZED HOUSING for polarization key and SOLDER termination type for durability.
TSW-106-07-G-S
Samtec TSW-106-07-G-S is a 6-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body size of 0.6" x 0.098" x 0.1". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C and meets UL standards.
DM3AT-SF-PEJM5(26)
Hirose Electric
DM3AT-SF-PEJM5(26) by Hirose Electric is a PCB connector with 0.043" pitch, 500VAC voltage withstand, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a male contact finish of AU, operates b/w -25 to 85 °C, and has a durability of 10000 cycles.
MEM2075-00-140-01-A
Global Connector Technology
MEM2075-00-140-01-A by Global Connector Technology is a PCB connector with 8 contacts, 0.043" pitch, and 1u plating thickness. It has a temperature range of -25 to 85°C and insulation resistance of 1Gohm. Ideal for applications requiring durable connectors with high mating cycles in electronics manufacturing.
VHR-4N-BK
BOARD CONNECTOR;
35362-0350
Molex 35362-0350 is a board connector with 3 contacts, featuring a mating contact pitch of 0.079" and body dimensions of 0.382" x 0.217" x 0.335". It uses TIN over copper termination for reliability in commercial applications.
DT04-3P-E003
TE Connectivity's DT04-3P-E003 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. With a UL flammability code of 94V-0, it is ideal for applications requiring a polarized male connector with strain relief mounting.
22-29-2021
Molex 22-29-2021 header connector features 0.1" pitch, 4A signal current rating, and polyamide insulation for durability. Ideal for board connections in commercial applications with UL and CSA standards compliance. Dimensions: 0.2"x.23"x.46", operating temp range of 0-75°C, and matte tin over nickel finish for reliable solder termination.
VHR-2N-R
43645-0200
The Molex 43645-0200 is a board connector with a mating contact pitch of 0.312". It features an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications, this female connector has a durability of 30 cycles and uses crimp termination on cables.
VHR-4N-M
51021-0700
The Molex 51021-0700 is a board connector with 7 contacts, 0.049" pitch, and 0.413" body length. It has an insulation resistance of 100M ohm and operates b/w -40°C to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ESHF-105-01-L-D-SM-K-TR
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2; Terminal Pitch (mm): 1.27;
ESHF-105-01-L-D-SM
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: PHOSPHOR BRONZE;
ESHF-105-01-L-D-SM-TR
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Row Spacing (inch): 0.05; JESD-609 Code: e3;
ESHF-105-01-L-D-SM-LC
ESHF-105-01-L-D-SM-LC by Samtec is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05", matte tin termination finish, and liquid crystal polymer insulator. It has a temperature range of -55 to 125°C and is ideal for commercial applications requiring a polarized housing and surface mount termination on rectangular PCB patterns.
ESHF-105-01-L-D-TH-TR
The Samtec ESHF-105-01-L-D-TH-TR is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05" and matte tin finish. Ideal for commercial applications, it has a temperature range of -55 to 125°C and uses liquid crystal polymer insulator material.
ESHF-105-01-L-D-TH-LC
Samtec ESHF-105-01-L-D-TH-LC is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05" and matte tin finish. Ideal for commercial applications, it has a temperature range from -55°C to 125°C and uses liquid crystal polymer insulator material.
ESHF-105-01-L-D-TH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05;
ESHF-110-01-L-D-SM-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-1: LOCKING; Mounting Type: BOARD;
ESHF-110-01-L-D-SM-LC-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
ESHF-111-01-L-D-SM
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: BOARD;
ESHF-107-01-L-D-SM-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR; No. of Rows Loaded: 2;
ESHF-107-01-L-D-SM
The Samtec ESHF-107-01-L-D-SM is a 2-row board connector with 14 contacts, featuring a mating contact pitch of 0.05" and termination finish of matte tin over nickel. It has a body length of 0.75", width of 0.22", and depth of 0.215", suitable for applications requiring reliable surface mount connections in commercial environments at temperatures ranging from -55°C to 125°C.
ESHF-105-01-L-D-RA
Samtec ESHF-105-01-L-D-RA header connector features 0.05" contact pitch, LCP insulator, and matte tin finish. Ideal for board mounting applications with 2 rows of contacts, operating from -55°C to 125°C.
ESHF-110-01-L-D-SM-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 20; Mixed Contacts: NO; Mounting Style: STRAIGHT;
ESHF-111-01-L-D-SM-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 22; Minimum Operating Temperature: -55 Cel;
ESHF-110-01-L-D-SM
ESHF-110-01-L-D-SM by Samtec is a 20-contact board connector with 0.05" pitch, ideal for commercial applications. Featuring matte tin finish, liquid crystal polymer insulator, and phosphor bronze contacts, it operates b/w -55°C to 125°C. With a rectangular PCB contact pattern and surface mount termination, this male connector offers reliable performance in various electronic systems.
ESHF-110-01-L-D-SM-LC-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Terminal Pitch (mm): 1.27; Mounting Style: STRAIGHT;
ESHF-120-01-L-D-TH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; DIN Conformance: NO;
ESHF-120-01-L-D-TH-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Length: 1.4 inch; Contact Style: SQ PIN-SKT;
ESHF-105-01-F-D-SM
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Row Spacing (inch): 0.05;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved