Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ESHF-107-01-L-D-SM-LC by Samtec is a 2-row board connector with 14 contacts, featuring a contact pitch of 1.27mm and matte tin over nickel finish. It has a body length of 0.75", width of 0.22", and depth of 0.215", suitable for applications requiring reliable surface mount termination in commercial environments at temperatures ranging from -55 to 125°C.
Median Price
$1.970
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Argo Parts USA
Continental Prestige Electronics
$1.931
Netroflash
AZTECH Wire
$9.218
Authorized Procurement Solutions
The small mating contact pitch of 0.05 inch allows for high density connector placement on the PCB, making it suitable for applications with limited space.
The compact body length of 0.75 inch helps in saving space on the PCB while providing reliable connectivity.
The matte tin over nickel termination contact finish offers high durability and corrosion resistance for a longer product lifespan.
The liquid crystal polymer insulator material provides excellent electrical insulation properties and high temperature resistance, ensuring reliable performance in various environments.
With a total of 14 contacts, this connector can support multiple signal connections, making it suitable for applications requiring multiple data transfer channels.
Having only one connector simplifies the installation process and reduces the chance of connection errors, making it user-friendly.
The board mounting option provides a secure attachment to the PCB, reducing the risk of mechanical failure or disconnection.
The commercial reliability rating assures users of consistent performance and durability for standard commercial applications.
Headers & Edge Type Connectors ESHF-107-01-L-D-SM-LC attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Polarization Key:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
ESHF-107-01-L-D-SM-LC Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Digitron Semiconductors
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
Central Semiconductor
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
Infineon Technologies
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
22-05-7028
Molex
Molex 22-05-7028 is a board connector with 2.54mm terminal pitch, suitable for commercial applications. Features brass contacts, matte tin finish, and polyamide insulator material. With a rated current of 4A and operating temperature range from -40 to 105°C, it offers reliable connectivity in various electronic devices.
FTSH-107-01-L-DV-K-A-P-TR
Samtec
Samtec's FTSH-107-01-L-DV-K-A-P-TR is a 2-row, 14-contact male board connector with tin finish. Operating from -55 to 125°C, it has a terminal pitch of 1.27mm and mounts on the board surface. Ideal for applications requiring high temperature resistance and secure connections in compact spaces.
78723-1001
Molex 78723-1001 is a PCB connector with 0.1" pitch, suitable for applications requiring a rated current of 0.5A. Featuring matte tin finish and glass-filled liquid crystal polymer insulator, it offers high insulation resistance of 1Gohm. With right-angle mounting style and black insulator color, it has 6 contacts in a rectangular pattern for surface mount termination.
1-826629-2
TE Connectivity
TE Connectivity 1-826629-2 is a board connector with 12 contacts, 0.1" pitch, and tin finish. It has a body length of 1.2", insulation resistance of 5G ohm, and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs.
47054-1000
The Molex 47054-1000 is a board connector with 4 contacts, 0.1" pitch, and 1500VAC dielectric voltage. It has a 0.425" body length, 0.229" width, and 0.5" depth. Ideal for commercial applications requiring a durable header connector with crimp termination and polarized housing.
DM3D-SF
Hirose Electric
The Hirose Electric DM3D-SF is a CARD EDGE CONNECTOR with 0.043" Mating Contact Pitch, 500VAC Dielectric Withstanding Voltage, and 1000000000 ohm Insulation Resistance. It features a LIQUID CRYSTAL POLYMER insulator material and is suitable for commercial applications requiring a durable connector with FEMALE contact gender in RIGHT ANGLE mounting style.
68612214122
Wuerth Elektronik & Kg
68612214122 by Wurth Elektronik is a FFC/FPC connector with 22 contacts, 0.039" pitch, and 1A signal current rating. Ideal for board mounting applications, it features polyphenylene sulfide insulation material and tin over nickel contact finish. Operating b/w -25°C to 85°C, it offers high durability with 25 cycles and meets UL standards for reliability.
FTSH-105-01-F-DV-K-P-TR
Samtec's FTSH-105-01-F-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
52271-1679
The Molex 52271-1679 is a FFC/FPC connector with 16 contacts, rated at 0.5A signal current. It has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 750VAC. Ideal for board mounting applications, it features a polyamide insulator material and operates b/w -40 to 85°C temperature range.
801-43-025-10-004000
Mill-max Mfg
801-43-025-10-004000 by Mill-max Mfg is a 25-contact board connector with matte tin finish. It has 2.54mm pitch, solder termination, and female contacts. Ideal for applications requiring straight mounting of socket-style connectors on boards.
70107-0004
Molex 70107-0004 is a BOARD CONNECTOR with 5 contacts, UL 94V-0 rated. It features MALE gender, CRIMP termination, and CABLE mounting. Ideal for various applications requiring reliable edge type connectors.
833-87-054-30-001101
Preci-dip Sa
833-87-054-30-001101 by Preci-dip Sa is a 54-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Featuring Beryllium Copper contacts with AU finish, it offers high durability of 500 cycles and insulation resistance of 10 Gohm. Ideal for applications requiring a mating contact pitch of 0.079", such as commercial electronics systems.
MEM2051-00-195-00-A
Global Connector Technology
MEM2051-00-195-00-A by Global Connector Technology is a PCB connector with 0.043" contact pitch, 500VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for applications requiring a female right-angle compression contact style with surface mount termination.
DT06-6S-CE05
The TE Connectivity DT06-6S-CE05 is a 2-row board connector with 6 contacts, rated for 13A signal current and 250V voltage. With a body length of 1.268", it features glass-filled polyamide insulation, operates b/w -55°C to 125°C, and has a durability of 100 cycles. Ideal for commercial applications requiring reliable connections in harsh environments.
DF19-20S-1C
DF19-20S-1C by Hirose Electric is a 20-contact FFC/FPC connector with 0.039" pitch, 300VAC dielectric voltage, and -35 to 85°C operating range. Ideal for commercial applications, it features a polarized housing, bellowed contact design, and crimp termination for reliable signal transmission in cable assemblies.
560020-0220
The Molex 560020-0220 is a board connector with 2 contacts, 0.079" pitch, and 3A signal current rating. It features a polyamide insulator, TIN contact finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connectors with surface mount termination.
53398-0371
Molex 53398-0371 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications requiring a male blade pin-skt contact style in a straight receptacle body with surface mount termination.
XHP-2-R
J S T Mfg
XHP-2-R by J S T Mfg is a BOARD CONNECTOR with 2 contacts, UL 94V-0 rated. It features FEMALE contacts for CRIMP termination and is ideal for CABLE mounting applications.
50-57-9005
The Molex 50-57-9005 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It features glass filled polyester insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring a reliable 5-contact female connector with crimp termination on cable mounting.
B6B-ZR(LF)(SN)
B6B-ZR(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.059" pitch, GLASS FILLED POLYAMIDE66 insulator, and 500VAC dielectric voltage. It operates b/w -25 to 85 °C, suitable for applications requiring high insulation resistance and UL94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ESHF-105-01-L-D-SM-K-TR
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2; Terminal Pitch (mm): 1.27;
ESHF-105-01-L-D-SM
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: PHOSPHOR BRONZE;
ESHF-105-01-L-D-SM-TR
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Row Spacing (inch): 0.05; JESD-609 Code: e3;
ESHF-105-01-L-D-SM-LC
ESHF-105-01-L-D-SM-LC by Samtec is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05", matte tin termination finish, and liquid crystal polymer insulator. It has a temperature range of -55 to 125°C and is ideal for commercial applications requiring a polarized housing and surface mount termination on rectangular PCB patterns.
ESHF-105-01-L-D-TH-TR
The Samtec ESHF-105-01-L-D-TH-TR is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05" and matte tin finish. Ideal for commercial applications, it has a temperature range of -55 to 125°C and uses liquid crystal polymer insulator material.
ESHF-105-01-L-D-TH-LC
Samtec ESHF-105-01-L-D-TH-LC is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05" and matte tin finish. Ideal for commercial applications, it has a temperature range from -55°C to 125°C and uses liquid crystal polymer insulator material.
ESHF-105-01-L-D-TH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05;
ESHF-110-01-L-D-SM-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-1: LOCKING; Mounting Type: BOARD;
ESHF-110-01-L-D-SM-LC-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
ESHF-111-01-L-D-SM
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: BOARD;
ESHF-107-01-L-D-SM
The Samtec ESHF-107-01-L-D-SM is a 2-row board connector with 14 contacts, featuring a mating contact pitch of 0.05" and termination finish of matte tin over nickel. It has a body length of 0.75", width of 0.22", and depth of 0.215", suitable for applications requiring reliable surface mount connections in commercial environments at temperatures ranging from -55°C to 125°C.
ESHF-105-01-L-D-RA
Samtec ESHF-105-01-L-D-RA header connector features 0.05" contact pitch, LCP insulator, and matte tin finish. Ideal for board mounting applications with 2 rows of contacts, operating from -55°C to 125°C.
ESHF-110-01-L-D-SM-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 20; Mixed Contacts: NO; Mounting Style: STRAIGHT;
ESHF-111-01-L-D-SM-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 22; Minimum Operating Temperature: -55 Cel;
ESHF-110-01-L-D-SM
ESHF-110-01-L-D-SM by Samtec is a 20-contact board connector with 0.05" pitch, ideal for commercial applications. Featuring matte tin finish, liquid crystal polymer insulator, and phosphor bronze contacts, it operates b/w -55°C to 125°C. With a rectangular PCB contact pattern and surface mount termination, this male connector offers reliable performance in various electronic systems.
ESHF-105-01-F-D-TH-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05; Termination Type: SOLDER;
ESHF-110-01-L-D-SM-LC-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Terminal Pitch (mm): 1.27; Mounting Style: STRAIGHT;
ESHF-120-01-L-D-TH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; DIN Conformance: NO;
ESHF-120-01-L-D-TH-LC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Length: 1.4 inch; Contact Style: SQ PIN-SKT;
ESHF-107-01-L-D-RA
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved