Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM's SML-A12Y8TT86 is a single color LED with 0.02A max forward current, 63.0mcd luminous intensity, and 85°C max operating temp. Ideal for surface mount applications, this yellow LED has a transparent lens and operates b/w -40°C to 85°C.
Median Price
$0.243
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.410
100+ parts
$0.198
1k+ parts
$0.150
10k+ parts
$0.123
Newark
$0.422
$0.205
$0.155
-
Verical
$0.187
$0.177
Chip1Stop
$0.197
Farnell
$0.169
$0.127
Element14
$0.289
$0.218
DF Sales Co.
$0.100
Cyclops Electronics Ltd
IBS Electronics
$0.104
NAC Semi
ACDS - Activité Composants Distribution Service
Rutronik
$0.114
Bristol Electronics
Nova Conductors
Ampacity Inc.
$0.119
Continental Prestige Electronics
$0.314
$0.112
$0.088
$0.066
CoreStaff
$0.441
$0.191
$0.110
Authorized Procurement Solutions
Kepictronics
Epart123
$0.120
iodParts Technologies Inc.
Argo Parts USA
Aranea Global
Single configuration makes it easy to use and integrate in different applications.
Low forward current helps in saving power and increasing the efficiency of the LED.
Colorless transparent lens ensures that the true color and brightness of the LED is displayed without any distortion.
Single color LED provides consistent and uniform illumination in applications where only one color is required.
High maximum operating temperature allows the LED to be used in a wide range of environments without risk of damage.
Low height makes it suitable for applications where space is limited.
Rectangular shape allows for easy placement and alignment in circuit designs.
Wide range of minimum operating temperature ensures the LED can function in cold environments as well.
Yellow color provides a distinct visual appearance for the LED, making it suitable for various applications.
Low maximum reverse voltage ensures protection against reverse polarity and voltage spikes.
Standard terminal pitch makes it compatible with a wide range of mounting options and circuit layouts.
Decent luminous intensity ensures good visibility and brightness for the LED in different lighting conditions.
Surface mount option offers easy and secure installation on PCBs, saving time and effort in assembly.
Visible LEDs SML-A12Y8TT86 attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Maximum Reverse Voltage:
Shape:
Sub-Category:
Terminal Pitch:
SML-A12Y8TT86 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
1552200253
Molex
WIRE AND CABLE;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
International Devices
261
Deltrol Controls
Other Relays;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
3013
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.7; Lens Type: CLEAR JEWEL; Viewing Angle: 20 deg;
LTST-C193KRKT-5A
Lite-on Technology
LTST-C193KRKT-5A by Lite-on Technology is a single color LED with peak wavelength of 639nm and max forward current of 0.02A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices. With a viewing angle of 130° and water clear lens type, it offers high luminous intensity at 26.05mcd.
HSMW-C265
Agilent Technologies
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 3.9 V; JESD-609 Code: e0;
MSL0104RGBU1
ROHM
ROHM's MSL0104RGBU1 is a 5.4mm TRIPLE COLOR LED with separate configuration and built-in ZENER DIODE. It has a max forward current of 0.04A, MILKY WHITE lens, and operates b/w -40 to 85°C. Ideal for applications requiring RGB color mixing in compact designs like signage, displays, and decorative lighting.
LSGT676-P7R-1-0+N7P9-24
Osram Opto Semiconductors
Osram Opto Semiconductors' LSGT676-P7R-1-0+N7P9-24 is a dual-color LED with peak wavelengths of 645nm (super red) and 572nm (green). It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 118.0/68.0 mcd. Ideal for surface mount applications in electronics requiring separate red and green light sources.
XHP35B-H0-0000-0D0BD40E2
Wolfspeed
SINGLE COLOR LED;
TLUV5300
Temic Semiconductors
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.5; Lens Type: UNTINTED DIFFUSED; T-code: T-1 3/4;
VLMB1500-GS08
VLMB1500-GS08 by Vishay Intertechnology is a 0.5mm BLUE SINGLE COLOR LED with a peak wavelength of 468nm, max forward current of 0.03A, and max forward voltage of 3.15V. Ideal for surface mount applications requiring a viewing angle of 130° and nominal luminous intensity of 28mcd.
597-7721-507F
Dialight
Dialight's 597-7721-507F is a dual-color LED with peak wavelengths of 585/570nm. It has separate, 2-element configuration and water-clear lens. Ideal for surface mount applications, it offers max forward current of 0.025A and viewing angle of 100°.
555-2001F
Dialight's 555-2001F is a 2mm single color LED with peak wavelength of 655nm. It has a max forward current of 0.05A and viewing angle of 90°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
LSQ976
LSQ976 by Osram Opto Semiconductors is a 1mm SINGLE COLOR LED with peak wavelength of 645nm. It has a max forward current of 0.025A and viewing angle of 160°. Ideal for applications requiring super red light emission, such as indicator lights in automotive or consumer electronics.
SML-LX1206GC-TR1
Lumex
The Lumex SML-LX1206GC-TR1 is a 2mm GREEN LED with peak wavelength of 565nm, forward current of 0.025A, and viewing angle of 160°. Ideal for surface mount applications in electronics, it operates b/w -25 to 85 °C and has a luminous intensity of 10.0mcd.
SML-D12U8WT86Q
ROHM SML-D12U8WT86Q is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting RED light at 63.0mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and milky white lens for uniform light dispersion.
XHP35A-00-0000-0D0BD440E
Wolfspeed's XHP35A-00-0000-0D0BD440E is a 2.8mm high SINGLE COLOR LED with max forward current of 1.05A and min luminous intensity of 125cd. Ideal for applications requiring white light at a wavelength, with max forward voltage of 11.9V and reverse voltage of 5V.
CMD15-21VGD/TR8
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.5; Lens Type: DIFFUSED; Packing Method: TR;
SSL-LXA228SYC-TR31
SSL-LXA228SYC-TR31 by Lumex is a 1.9mm single color LED with peak wavelength of 590nm and max forward current of 0.03A. Ideal for applications requiring a super yellow light source, such as indicator lights in electronic devices. Features surface mounting method and clear lens type.
APT1608LZGCK
Kingbright Electronic
Kingbright Electronic's APT1608LZGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm and 50.0mcd luminous intensity. Ideal for surface mount applications, it operates b/w -40 to 85°C, making it suitable for various visible LED lighting projects.
LTST-C191KFKT
LTST-C191KFKT by Lite-on Technology is a 1.1mm WATER CLEAR LED with peak wavelength of 611nm, emitting ORANGE light. It has a max forward current of 0.03A and viewing angle of 130°, making it ideal for surface mount applications requiring amber illumination in electronic devices.
LTST-C170GKTT
LTST-C170GKTT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 130° and nominal luminous intensity of 6.0mcd, operating b/w -55°C to 85°C temperature range.
LGR971
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 26.05; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-A12UTT86
ROHM's SML-A12UTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 630nm, forward current of 0.03A. Ideal for applications requiring colorless transparent lens, it operates b/w -40 to 85°C and has a luminous intensity of 100mcd.
SML-A12DTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-A12WTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 63.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-A12UTT86J
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: COLORLESS TRANSPARENT; Maximum Forward Voltage: 2 V;
SML-A12U8TT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 63.0; Lens Type: COLORLESS TRANSPARENT; Height: .55 mm;
SMLA12WBC7W1AP
Visible LEDs;
SMLA12WBN7W1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 56.0; Lens Type: MILKY WHITE; Maximum Forward Current: .01 A;
SML-A12M8TT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Lens Type: COLORLESS TRANSPARENT; Terminal Pitch: 2.1 mm;
SMLA12WBC7W1
SINGLE COLOR LED; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4;
SML-A12Y8TT86P
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 32.5; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-A12Y8TT86S
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 130.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-A12Y8TT87P
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 32.5; Lens Type: COLORLESS TRANSPARENT; Terminal Pitch: 2.1 mm;
SML-A12Y8TT87Q
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 51.5; Lens Type: COLORLESS TRANSPARENT; JESD-609 Code: e4;
SML-A12Y8TT87R
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 81.5; Lens Type: COLORLESS TRANSPARENT; No. of Functions: 1;
SML-A12Y8TT86QP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 51.5; Terminal Finish: GOLD OVER NICKEL; Configuration: SINGLE;
SML-A12Y8TT86RP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 81.5; Terminal Finish: GOLD OVER NICKEL; Packing Method: TAPE;
SML-A12Y8TT86SP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 130.0; Terminal Finish: GOLD OVER NICKEL; Size: 1.2 mm;
SML-A12Y8TT87PP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 32.5; Terminal Finish: GOLD OVER NICKEL; Maximum Forward Current: .02 A;
SML-A12Y8TT87RP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 81.5; Terminal Finish: GOLD OVER NICKEL; Maximum Operating Temperature: 85 Cel;
SML-A12Y8TT87SP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 130.0; Terminal Finish: GOLD OVER NICKEL; Height: .55 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved