Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC; JESD-609 Code: e3; Terminal Finish: TIN;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Component Stockers USA
1+ parts
$99.990
100+ parts
1k+ parts
10k+ parts
Native Components
Northwest PG Solutions
Triode For Alternating Current (TRIAC) BCR08AM-12A#BD0 attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Renesas Electronics
JESD-609 Code:
Terminal Finish:
Trigger Device Type:
BCR08AM-12A#BD0 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
Comchip Technology
4554
Jw Miller Magnetics
Other Semiconductors;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Q6015R5
Littelfuse
The Littelfuse Q6015R5 is a TRIAC with 600V repetitive peak off-state voltage, 15A max RMS on-state current, and 50mA max DC gate trigger current. Ideal for AC power control applications in industrial equipment, lighting systems, and motor speed controls due to its single configuration and through-hole terminal form. Operating temperature ranges from -40°C to 125°C.
ACST610-8GTR
ACST610-8GTR by STMicroelectronics is a TRIAC with 800V repetitive peak off-state voltage, 6A max RMS on-state current, and 10mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
TIC201D
TIC201D by Texas Instruments is a TRIAC with 2.5A RMS on-state current, 400V repetitive peak off-state voltage, and -40 to 110°C operating temperature range. Ideal for AC power control applications requiring precise triggering and low leakage current.
BT139B-600E,118
NXP Semiconductors
BT139B-600E,118 by NXP Semiconductors is a TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It has a max DC gate trigger current of 10mA and operates b/w -40 to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
L4004D5RP
L4004D5RP by Littelfuse is a single TRIAC with 1.6V max on-state voltage and 5mA max DC gate trigger current. Ideal for applications requiring a 4A max RMS on-state current, such as in UL recognized circuits operating b/w -40°C to 110°C.
TIC225B
TIC225B by Texas Instruments is a TRIAC with 15mA DC Gate Trigger Current, 2mA Leakage Current, and 8A RMS On-state Current. It operates b/w -40 to 110°C and has a max Off-state Voltage of 200V. Ideal for AC power control applications due to its high current handling capacity and precise triggering capabilities.
TIC226M
Loras Industries
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BTA24-600CWRG
BTA24-600CWRG by STMicroelectronics is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125°C, ideal for snubberless TRIAC applications. Featuring a max DC gate trigger current of 35mA, it is UL recognized and has an isolated case connection.
T3035H-6G
SNUBBERLESS TRIAC; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
MAC997B6
Onsemi
MAC997B6 by Onsemi is a TRIAC with 3 terminals and a max RMS on-state current of 0.8A. It operates b/w -40 to 110 °C, with a repetitive peak off-state voltage of 400V. Ideal for applications requiring precise AC power control in various electronic devices.
NYE08-10B6ST1G
4 QUADRANT LOGIC LEVEL TRIAC; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
CLA80MT1200NHB
IXYS Corporation
TRIAC;
BTA16-600CWRG
BTA16-600CWRG by STMicroelectronics is a single TRIAC with 16A max RMS on-state current and 600V repetitive peak off-state voltage. It is used as a snubberless TRIAC in applications requiring AC power control, such as dimmer switches and motor speed controllers. Operating temperature ranges from -40°C to 125°C for versatile use.
Power Innovations
BTA26-800BRG
BTA26-800BRG by STMicroelectronics is a TRIAC with 3 terminals, rated for 25A RMS current and 800V off-state voltage. It has a max operating temperature of 125°C and trigger voltage of 1.5V, making it suitable for AC power control applications requiring high reliability and performance in industrial settings.
DTA3F
DTA3F by Onsemi is a TRIAC with 1.8V max on-state voltage, 15mA max DC gate trigger current, and 1mA max leakage current. It operates b/w -30 °C to 100°C, suitable for AC power control applications like dimmers and motor speed controllers.
MAC15SDG
MAC15SDG by Onsemi is a single TRIAC with 3 terminals, capable of handling up to 15A RMS on-state current and 400V repetitive peak off-state voltage. It operates b/w -40 °C to 110°C, making it suitable for various AC applications requiring precise switching control at low DC gate trigger current of 5mA.
DTA12G
DTA12G by Onsemi is a TRIAC with 1.4V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. Ideal for applications requiring a trigger device with 12A max RMS on-state current, 3V max DC gate trigger voltage, and 600V repetitive peak off-state voltage at temperatures up to 125 °C.
BTA25H-600CW3G
BTA25H-600CW3G by Onsemi is a 4 quadrant logic level TRIAC with max RMS on-state current of 25A and repetitive peak off-state voltage of 600V. Ideal for AC power control applications, it has a max operating temp of 150 °C and min operating temp of -40°C.
MAC15SD
MAC15SD by Onsemi is a single TRIAC with 15A RMS on-state current and 400V repetitive peak off-state voltage. It operates b/w -40 to 110 °C, with a max DC gate trigger current of 5mA. Ideal for applications requiring precise AC power control in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BCR08AM-14A#BD0
Integrated Device Technology
Renesas Electronics
BCR08AM-14A#B00
TRIAC; Surface Mount: NO; Maximum Leakage Current: 1 mA; Minimum Operating Temperature: -40 Cel; Minimum Critical Rate of Rise of Commutation Voltage: .5 V/us; Maximum Operating Temperature: 125 Cel;
BCR08AM-12A-A6#BD0
TRIAC; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
BCR08AM-12A-TB#BD0
TRIAC; Terminal Finish: TIN; JESD-609 Code: e3;
BCR08AM-14A-A6#BD0
BCR08AM-12A-TB
TRIAC; Surface Mount: NO; Maximum RMS On-state Current: .8 A; Minimum Critical Rate of Rise of Commutation Voltage: .5 V/us; Maximum Leakage Current: 1 mA; Maximum DC Gate Trigger Current: 5 mA;
BCR08AM-14A#B10
TRIAC; Surface Mount: NO; Minimum Operating Temperature: -40 Cel; Minimum Critical Rate of Rise of Commutation Voltage: .5 V/us; Repetitive Peak Off-state Voltage: 700 V; Maximum RMS On-state Current: .8 A;
BCR08AM-12A
TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum DC Gate Trigger Voltage: 2 V;
BCR08AM-12L
TRIAC; Surface Mount: NO; Maximum On-state Voltage: 2 V; Maximum Operating Temperature: 125 Cel; Minimum Critical Rate of Rise of Commutation Voltage: .5 V/us; Maximum Leakage Current: 1 mA;
BCR08AM-12A#B00
TRIAC; Surface Mount: NO; JESD-609 Code: e2; Minimum Operating Temperature: -40 Cel; Minimum Critical Rate of Rise of Commutation Voltage: .5 V/us; Maximum RMS On-state Current: .8 A;
BCR08AM-14
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 2 V; Minimum Critical Rate of Rise of Commutation Voltage: .5 V/us; Maximum Operating Temperature: 125 Cel; Maximum RMS On-state Current: .8 A;
BCR08AM-14A-A6#B00
TRIAC; Terminal Finish: TIN OVER COPPER;
BCR08AM-14A-A6#FD0
TRIAC; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
BCR08AM-12A-A6#B00
TRIAC; Terminal Finish: Tin (Sn) over Copper (Cu); Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
BCR08AM-14A
TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Shape: ROUND;
BCR08AM-12A-TB#B00
BCR08AM
TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum RMS On-state Current: .8 A;
BCR08AM-12A-A6
TRIAC; Surface Mount: NO; Repetitive Peak Off-state Voltage: 600 V; Minimum Critical Rate of Rise of Commutation Voltage: .5 V/us; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved