Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Renesas Electronics 9DB1233AGLFT is a Clock Driver & Buffer with 64 terminals, operating at temperatures from 0 to 70°C. It features differential mux input conditioning, 3-state output characteristics, and a supply voltage of 3.3V. Ideal for applications requiring precise clock signal distribution in compact electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Chip Stock
Nova Conductors
Vyrian
AZTECH Wire
$17.830
$17.120
$16.780
$16.450
Corohmni
$31.181
Aztec Data Supply Inc.
$31.202
Advanced Electronics
$33.846
$32.154
Semicontronic
$37.000
$36.075
$35.890
Ampacity Inc.
$48.000
Perfect Parts
A-Z Elektronik GmbH
Continental Prestige Electronics
Argo Parts USA
Alle Elektronik GmbH
Kepictronics
Bastille Electronics
Futuretech Components
Microchip USA
Speed Components Ltd (Excess)
PLASTIC/EPOXY - This material provides a durable and cost-effective solution for the product.
YES - Allows for easy and efficient installation on PCBs, saving time and space.
DIFFERENTIAL MUX - Ensures accurate signal processing for improved performance.
RECTANGULAR - Helps in efficient utilization of space on the PCB.
3.3 - Provides a stable power source for consistent operation.
3.3 - Supports the required voltage for optimal functionality.
64 - Offers flexibility for connecting multiple components.
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH - Facilitates a compact and streamlined design.
70 °C - Ensures reliable operation even in high-temperature environments.
3-STATE - Allows for multiple output options for increased versatility.
0 °C - Ensures functionality in various temperature conditions.
MATTE TIN - Provides a corrosion-resistant finish for longevity.
DUAL - Enables efficient connection and signal transmission.
1.2 mm - Contributes to a low-profile design for space-saving applications.
6.1 mm - Offers a compact form factor for easy integration into electronic systems.
3.135 V - Ensures operation even at lower voltage levels.
30 - Supports robust soldering processes for secure connections.
260 - Withstands high-temperature reflow processes during manufacturing.
17 mm - Provides a balanced size for various PCB layouts.
COMMERCIAL - Suitable for standard operating temperature ranges.
GULL WING - Facilitates easy and secure soldering to the PCB.
TR - Ensures safe and organized shipment and storage.
0.5 mm - Allows for precise and efficient connections on the PCB.
0.05 ns - Helps in maintaining signal integrity for accurate timing.
12 - Offers multiple output signals for enhanced functionality.
3.465 V - Allows for flexibility in power supply options.
Clock Drivers & Buffers 9DB1233AGLFT attributes and parameters. Explore more Clock Drivers & Buffers devices from Renesas Electronics
Family:
Input Conditioning:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Inverted Outputs:
No. of Terminals:
No. of True Outputs:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Same Edge Skew (tskwd):
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
9DB1233AGLFT Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Formosa Microsemi
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
IDT2305-1DCG
Renesas Electronics
The Renesas Electronics IDT2305-1DCG clock driver offers 4 true outputs with a min frequency of 133 MHz. It operates at a nominal voltage of 3.3V and has a propagation delay of 0.35 ns, making it suitable for applications requiring precise timing synchronization in commercial-grade environments. The small outline package style with gull wing terminals ensures easy surface-mount installation in compact electronic designs.
ICS874003AGI-02LFT
Integrated Device Technology
ICS874003AGI-02LFT clock driver by Integrated Device Technology features a 3.3V supply voltage, differential input conditioning, and 20 terminals in a small outline package. With an operating temperature range of -40 to 85°C, it is ideal for industrial applications requiring precise timing synchronization and signal buffering. The device offers three true outputs with a max frequency of 98MHz, making it suitable for various electronic systems that demand reliable clock distribution and synchronization.
542MILFT
The Renesas Electronics 542MILFT clock driver has a propagation delay of 15ns, operates at a nominal voltage of 3.3V, and features a small outline package style. It is designed for industrial applications requiring precise timing synchronization in electronic systems.
AD9510BCPZ
Analog Devices
AD9510BCPZ by Analog Devices is a Clock Driver with 64 terminals, Propagation Delay of 1.76 ns, and Differential Mux Input Conditioning. It operates in Industrial temperature range (-40 to 85 °C) and has a Max fmax of 1200 MHz. Ideal for applications requiring precise clock distribution in electronic systems.
CDCV304PWR
CDCV304PWR by Texas Instruments is a clock driver with 3ns propagation delay, suitable for industrial applications. It operates at 2.5V nominal voltage and has 4 true outputs with a max frequency of 200MHz. This small outline package features surface mount design and standard input conditioning, making it ideal for compact electronic devices.
ICS8304AMILFT
Integrated Circuit Systems
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ICS874003AGI-02LF
ICS874003AGI-02LF clock driver by Integrated Device Technology features 3.3V nominal voltage, differential input conditioning, and 20 terminals in a small outline package. Ideal for industrial applications requiring precise timing control with a temperature range of -40 to 85°C.
9DB803DGILFT
The Renesas Electronics clock driver 9DB803DGILFT features a 48-terminal small outline package with differential mux input conditioning. Operating at temperatures from -40 to 85°C, it offers 8 true outputs and supports a nominal voltage of 3.3V. Ideal for industrial applications requiring precise timing control in compact spaces.
NB3L553DR2G
NB3L553DR2G clock driver by Onsemi features a 5 ns propagation delay at 2.5V, with 4 true outputs and 3-STATE output characteristics. It is ideal for applications requiring precise timing control in industrial settings, offering a small outline package style suitable for surface mount assembly.
PI49FCT32803QE
Diodes Incorporated
PI49FCT32803QE clock driver by Diodes Inc. has a propagation delay of 2.5 ns, operates at 3.3V, and offers 7 true outputs. It is used in industrial applications requiring fast signal transmission with a small outline package style for space-constrained designs.
SY75612TWL-TR
Microchip Technology
SY75612TWL-TR clock driver by Microchip has 1.5 ns propagation delay, operates at -40 to 105 °C, and supports 24 true outputs at 250 MHz. Ideal for applications requiring differential mux input conditioning in a compact chip carrier package with very thin profile.
NB3L553MNR4G
NB3L553MNR4G clock driver by Onsemi has a 5 ns propagation delay at 2.5V, with 8 terminals in a small outline package. It operates b/w -40 to 85°C and features 4 true outputs for industrial applications requiring precise timing control.
9DB803DFILFT
Renesas Electronics 9DB803DFILFT is a Clock Driver & Buffer with 48 terminals, operating at -40 to 85°C. It features Differential Mux input conditioning, 3-STATE output characteristics, and supports a supply voltage range of 3.135V to 3.465V. Ideal for industrial applications requiring precise timing control in compact designs.
CDC337DW
The Texas Instruments CDC337DW clock driver has a propagation delay of 0.9 ns, operates at 5V, and offers 8 true outputs. Ideal for industrial applications requiring precise timing control in a compact package with surface mount capability.
MC100LVEP111FAR2G
MC100LVEP111FAR2G clock driver by Onsemi features 0.59ns propagation delay, 32 terminals, and ECL technology. Ideal for industrial applications requiring differential mux input conditioning and low profile flatpack package style.
PI6C10804WE
Pericom Semiconductor
49FCT3805AQGI8
Renesas Electronics 49FCT3805AQGI8 clock driver has a propagation delay of 5.2ns at 3.3V, with Schmitt trigger input conditioning and 3-state output characteristics. It is used in applications requiring precise timing control and signal buffering, featuring a small outline package style for compact designs.
IDT2305-1DCG8
The Renesas Electronics IDT2305-1DCG8 clock driver features 3.3V nominal voltage, 8 Amp max I (ol), and 0.35 ns propagation delay. Ideal for applications requiring precise timing control in commercial-grade environments with a temperature range of 0 to 70°C.
MC10E111FNG
MC10E111FNG clock driver by Onsemi features 0.66ns propagation delay, 5V nominal voltage, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring differential input conditioning in a square chip carrier package.
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: SSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
9ZXL1251EKILFT
Renesas
RC19013AGNG#KB0
RC19013A100GNG#KB0
9DB1233AGLFT
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TSSOP; Package Shape: RECTANGULAR;
9DB1233AGLF
9DB106BGILFT
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR;
9DB104BFLF
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
9DB102BFILF
PLL BASED CLOCK DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR; No. of Inverted Outputs: 0;
9DB104YFLFT
PLL BASED CLOCK DRIVER;
9DB104YFLLFT
9DB102AFILFT
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
9DB102AGILF
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
9DB102BFLF
PLL BASED CLOCK DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G20;
9DB102BGLFT
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
9DB102AGLFT
9DB104BFLFT
9DB102AFLFT
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
9DB102BFLFT
PLL BASED CLOCK DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR; Maximum Power Supply Current (ICC): 100 mA;
9DB102AGILFT
9DB102BGILF
9DB1200CGLF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved