Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Corohmni
1+ parts
$11.237
100+ parts
1k+ parts
10k+ parts
Advanced Electronics
$39.157
$35.633
$32.109
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Microchip USA
Authorized Procurement Solutions
Glotronic Ltd.
A-Z Elektronik GmbH
Northwest PG Solutions
Native Components
Clock Drivers & Buffers 8302AMILFT attributes and parameters. Explore more Clock Drivers & Buffers devices from Renesas Electronics
Additional Features:
Family:
Input Conditioning:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Inverted Outputs:
No. of Terminals:
No. of True Outputs:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Maximum Same Edge Skew (tskwd):
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
8302AMILFT Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Dc Components
LL4148
Goodwork Semiconductor
STMicroelectronics
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
SY89841UMG
Microchip Technology
SY89841UMG by Microchip Tech is Clock Driver & Buffer with 2 differential mux inputs, 0.87 ns propagation delay, and 1500 MHz min fmax. Ideal for industrial applications requiring inverted output polarity and operating temperature range of -40 to 85 °C.
AD9516-1BCPZ
Analog Devices
AD9516-1BCPZ by Analog Devices features 1.18 ns propagation delay, 3.3V nominal voltage, and 10 true outputs at up to 800 MHz. Ideal for clock distribution in industrial applications due to its differential mux input conditioning and open-drain output characteristics.
74FCT38074SDCGI
Integrated Device Technology
8305AGI-02LFT
8305AGI-02LFT clock driver by Integrated Device Technology features a propagation delay of 3.2 ns at 3.3V, with differential mux input conditioning and 4 true outputs at up to 250 MHz. This small outline, thin profile package is ideal for industrial applications requiring precise timing synchronization in a compact form factor.
580M-01ILF
Renesas Electronics
Renesas Electronics' 580M-01ILF is a Clock Driver & Buffer with 16 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V, outputting 2 true signals with a propagation delay of 12ns. Ideal for industrial applications requiring precise timing and signal conditioning in compact designs.
8305AGILF
Renesas Electronics 8305AGILF is a Clock Driver with 3.7ns Propagation Delay, 16 Terminals, and 350MHz Min fmax. It is used in applications requiring Differential MUX Input Conditioning and features a Small Outline Thin Profile package style for industrial temperature grade environments.
874003AGI-02LFT
PLL BASED CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
CDCM61001RHBT
CDCM61001RHBT clock driver by Texas Instruments operates at 3.3V with load capacitance of 5pF. It features a package style of CHIP CARRIER, suitable for industrial applications. With a max frequency of 683.28MHz, it is ideal for high-speed signal conditioning in electronic systems.
5PB1104PGGK8
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
ICS551MLFT
ICS551MLFT by Renesas Electronics is a clock driver with a propagation delay of 8 ns and operates at a nominal voltage of 3.3 V. It is commonly used in applications that require precise timing synchronization, such as telecommunications and networking equipment.
AD9508BCPZ-REEL7
AD9508BCPZ-REEL7 by Analog Devices is a Clock Driver with 3.07 ns Propagation Delay, suitable for applications requiring fast signal processing. It operates at a Nominal Voltage of 2.5V and offers Differential MUX Input Conditioning, making it ideal for industrial temperature environments. With 8 True Outputs and a Min fmax of 1650 MHz, this CMOS technology-based driver ensures high-speed performance in various electronic systems.
PI49FCT3805BQEX
Diodes Incorporated
PI49FCT3805BQEX clock driver by Diodes Inc. features 5 ns propagation delay, Schmitt trigger input conditioning, and 3-STATE output characteristics. Ideal for applications requiring precise timing control in industrial settings with a supply voltage of 3.3V and load capacitance of 50 pF.
ICS570BLFT
PLL BASED CLOCK DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
874003BG-05LFT
PLL BASED CLOCK DRIVER; Packing Method: TR; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
ICS580M-01ILFT
Integrated Circuit Systems
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
LMK00304SQ/NOPB
LMK00304SQ/NOPB by Texas Instruments is a clock driver with 2.7ns propagation delay, suitable for industrial applications. It operates at 3.3V, has 32 terminals, and offers differential mux input conditioning. With a max frequency of 3100MHz and low power consumption of 13.5mA, it's ideal for high-speed communication systems.
SI5330F-B00215-GMR
Skyworks Solutions
LOW SKEW CLOCK DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SI53108-A01AGM
Silicon Labs
SI53108-A01AGM by Silicon Labs is a clock driver and buffer with surface mount capability. It features differential mux input conditioning, 1 function, and a square package shape. This device is commonly used in industrial applications due to its wide temperature range and compact size.
LTC6954IUFF-3#TRPBF
Analog Devices' LTC6954IUFF-3#TRPBF is a Clock Driver with 0.625 ns Propagation Delay, 3 True Outputs, and Schmitt Trigger Input Conditioning. Ideal for applications requiring fast signal processing in industrial settings with operating temperatures ranging from -40 to 105°C.
LMK04803BISQE/NOPB
Clock Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: QCCN; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
83026BGI-01LFT
Renesas Electronics clock driver 83026BGI-01LFT has a propagation delay of 3.1 ns at 3.3V, suitable for industrial applications. It offers differential input conditioning, 2 true outputs with a min fmax of 350 MHz, and operates in temperatures ranging from -40 to 85°C.
83026BGI-01LF
Renesas Electronics' 83026BGI-01LF is a clock driver with 3.1 ns propagation delay at 3.3V, suitable for industrial applications. It features differential input conditioning, 8 terminals in a small outline package, and operates b/w -40 to 85°C.
83023AMILFT
LOW SKEW CLOCK DRIVER; JESD-609 Code: e3; Packing Method: TR; Peak Reflow Temperature (C): 260; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 1;
83026BMI-01LFT
83021AMI-09LF
LOW SKEW CLOCK DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Packing Method: TUBE;
83021AMI-09LFT
LOW SKEW CLOCK DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 2.5;
83023AMILF
LOW SKEW CLOCK DRIVER; JESD-609 Code: e3; Packing Method: TUBE; Terminal Finish: TIN; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
83026AMILF
83026AMILFT
83026BMI-01LF
8302AMI-01LF
LOW SKEW CLOCK DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 1;
8302AMI-01LFT
LOW SKEW CLOCK DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Finish: TIN;
8302AMILF
8302AMILFT
8302AMIT
8302AMI
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved