Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Renesas Electronics' 70V24L20PFGI is a 4Kx16 DUAL-PORT SRAM with 3.3V supply, operating at -40 to 85°C. Featuring a low profile FLATPACK package, 0.5mm terminal pitch, and 20ns access time, it's ideal for industrial applications requiring fast and reliable parallel memory storage.
Median Price
$46.790
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Renesas
1+ parts
100+ parts
$37.032
1k+ parts
$34.967
10k+ parts
-
Chip1Stop
$55.100
$41.000
$39.200
Mouser Electronics
$58.670
$48.160
RS (Exports)
$34.369
$29.434
Verical
$32.812
Nova Conductors
$39.694
Chip Stock
VNN
IBS Electronics
$40.326
NAC Semi
$54.280
$50.110
Vyrian
Rebound Electronics
Advanced Electronics
$2.483
$2.260
$2.036
Aztec Data Supply Inc.
$3.920
Corohmni
$4.944
Ampacity Inc.
$29.210
Semicontronic
$28.480
$28.334
Continental Prestige Electronics
$38.900
Microchip USA
$103.431
Authorized Procurement Solutions
ChipstoGo Electronic ltd
Argo Parts USA
GreenTree Electronics
RC Electronics
$37.770
$34.470
$33.440
iodParts Technologies Inc.
Kepictronics
Perfect Parts
Netroflash
$37.709
$36.915
Component Stockers USA
Durable material that can withstand various environmental conditions, making the product reliable for long-term use.
Allows for easy installation on circuit boards, saving time and effort during assembly.
Enables independent operation of different functions within the product, enhancing efficiency and performance.
Optimal voltage level for stable and consistent operation, ensuring reliability and longevity of the product.
Offers a good balance of storage capacity and data retrieval speed, making it suitable for a wide range of applications.
Low power consumption and high noise immunity, contributing to energy efficiency and reliable operation of the product.
Fast data access time for quick retrieval and processing of information, enhancing overall performance of the product.
SRAM 70V24L20PFGI attributes and parameters. Explore more SRAM devices from Renesas Electronics
Maximum Access Time:
Input/Output Type:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Ports:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Standby Current:
Minimum Standby Voltage:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
70V24L20PFGI Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.41
SB
8542.32.00.40
PCN Design/Specification - All Dev Label Chg 1/Dec/2022
PCN Assembly/Origin - Mult Device Assembly Site Add 26/Aug/2016
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Diotec Semiconductor Ag
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
International Semiconductor
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
71342LA20PFG8
Renesas Electronics
Renesas Electronics' 71342LA20PFG8 is a 4Kx8 SRAM with 64 terminals, operating at 5V. It features an asynchronous mode, parallel interface, and common I/O type. Suitable for commercial applications requiring fast access times and low standby current.
23LCV1024-I/ST
23LCV1024-I/ST by Microchip Technology is a 128KX8 SRAM with 20 MHz clock frequency, operating at -40 to 85 °C. It has separate I/O, 3-STATE output, and uses 0.65 mm terminal pitch. Ideal for industrial applications requiring high-speed synchronous memory in a small outline package.
71321LA55TFG
Integrated Device Technology
MULTI-PORT SRAM; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; JESD-609 Code: e3;
AS6C4008-55BIN
Alliance Memory
Alliance Memory's AS6C4008-55BIN is a 512Kx8 SRAM with 55ns access time, operating at 3V. It features a thin profile grid array package and common I/O type. Ideal for industrial applications requiring fast and reliable memory performance.
CY7C1041G30-10BVXIT
Infineon Technologies
Infineon's CY7C1041G30-10BVXIT is a 256Kx16 SRAM with 100MHz clock frequency, 10ns access time, and 3-state output. Ideal for applications requiring fast and reliable memory storage in devices like networking equipment, industrial automation systems, and telecommunications infrastructure.
IDT71V416S10PHGI
STANDARD SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 44; Package Code: TSOP2; Package Shape: RECTANGULAR; No. of Functions: 1;
CY7C1049G30-10ZSXI
Infineon's CY7C1049G30-10ZSXI is a 512Kx8 SRAM with 10ns access time, operating at 3V. It features a small outline package suitable for industrial applications. With parallel technology and 524288 words, it offers high memory density in a compact form factor.
DS1995L-F5
Dallas Semiconductor
NON-VOLATILE SRAM; Temperature Grade: OTHER; No. of Terminals: 2; Package Shape: ROUND; Minimum Supply Voltage (Vsup): 2.8 V; Memory Density: 16384 bit;
CY14E256LA-SZ25XIT
Cypress Semiconductor
NON-VOLATILE SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage (Vsup): 4.5 V;
CY7C1612KV18-250BZXI
Infineon Technologies' CY7C1612KV18-250BZXI is a QDR II SRAM with 8MX18 organization and 150994944-bit memory density. It operates at a max clock frequency of 250 MHz and has a low profile package style. This SRAM is suitable for industrial applications requiring high-speed synchronous memory.
IS61WV51216BLL-10TLI
Integrated Silicon Solution
IS61WV51216BLL-10TLI by Integrated Silicon Solution is a 512Kx16 SRAM with 10ns access time, operating at 3.3V. It features a small outline package, industrial temperature grade, and asynchronous operation. Ideal for applications requiring fast and reliable memory storage in industrial environments.
5962-8685916LA
Motorola
STANDARD SRAM; Temperature Grade: MILITARY; No. of Terminals: 24; Package Shape: RECTANGULAR; Maximum Access Time: 45 ns; Package Body Material: CERAMIC, GLASS-SEALED;
IDT71024S15TYGI8
The Renesas Electronics IDT71024S15TYGI8 is a 128Kx8 SRAM with a 15ns access time, operating at 5V. It features a small outline package and offers 3-state output characteristics. Ideal for industrial applications requiring fast and reliable memory storage in parallel configuration.
CY7C1470V33-167AXI
CY7C1470V33-167AXI by Infineon is a 2MX36 ZBT SRAM with 3.3V supply, 167MHz clock frequency, and 3.4ns access time. Ideal for industrial applications requiring high-speed synchronous memory with a memory density of 75497472 bits and operating temperature range of -40 to 85°C.
DS1270Y-70IND#
Analog Devices
DS1270Y-70IND# by Analog Devices is a 2MX8 SRAM with 2097152 words, 16777216 bit memory density, and 70 ns max access time. It is used in industrial applications requiring non-volatile memory storage with a supply voltage range of 4.5V to 5.5V.
71321LA20PFG8
Renesas Electronics' 71321LA20PFG8 is a 2Kx8 MULTI-PORT SRAM with 20ns access time, operating at 5V. It features a low profile flatpack package and supports asynchronous operation. Ideal for applications requiring fast and reliable memory storage in commercial-grade environments.
UPD431000AGZ-70X-KJH-A
Nec Electronics
STANDARD SRAM; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 32; Package Code: TSOP1; Package Shape: RECTANGULAR; Qualification: Not Qualified;
23LCV1024-I/SN
23LCV1024-I/SN by Microchip Technology is a 128KX8 SRAM with 3/5 V power supplies, operating at -40 to 85 °C. It features a max clock frequency of 20 MHz and offers 131072 words memory density. Ideal for industrial applications requiring small outline packages and low standby current.
CY7C1051DV33-10ZSXI
STANDARD SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 44; Package Code: TSOP2; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 30;
MULTI-PORT SRAM; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LQFP; Package Shape: SQUARE; Parallel or Serial: PARALLEL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
70V24L20PFGI
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; JESD-609 Code: e3;
70V24L20PFGI8
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Length: 14 mm;
DUAL-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Peak Reflow Temperature (C): 260;
70V27L20PFGI8
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Power Supplies (V): 3.3;
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES;
70V28L20PFGI
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; No. of Functions: 1;
DUAL-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Minimum Operating Temperature: -40 Cel;
70V28L15PFG
MULTI-PORT SRAM; Temperature Grade: COMMERCIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Organization: 64KX16;
The Renesas Electronics 70V28L15PFG is a 64Kx16 DUAL-PORT SRAM with 3.3V supply voltage, operating in asynchronous mode with 15ns access time. It features a low profile flatpack package and is suitable for applications requiring fast and efficient memory access in commercial temperature environments.
70V261L25PFGI
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Terminal Finish: MATTE TIN;
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Organization: 16KX16;
70V28L20PFGI8
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; No. of Ports: 2;
DUAL-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Memory Density: 1048576 bit;
70V24L15PFGI8
DUAL-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: QFP; Package Shape: SQUARE; No. of Words Code: 4K;
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: QFP; Package Shape: SQUARE; Organization: 4KX16;
70V27L20PFGI
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: QFP; Package Shape: SQUARE; Parallel or Serial: PARALLEL;
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: QFP; Package Shape: SQUARE; Maximum Supply Current: 230 mA;
70V261L25PFGI8
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Terminal Finish: Matte Tin (Sn) - annealed;
MULTI-PORT SRAM; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Maximum Standby Current: .003 Amp;
70V24L20PF8
MULTI-PORT SRAM; Temperature Grade: COMMERCIAL; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Maximum Access Time: 20 ns;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved