Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Radiall S A R125055002 SSMA Connector features low insertion loss of 0.02 dB and gold termination for optimal performance. With a threaded coupling type, it is ideal for RF applications up to 18 GHz, offering a VSWR of 1.05 and a characteristic impedance of 50 ohms.
Median Price
$8.091
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$6.080
100+ parts
$4.560
1k+ parts
$4.190
10k+ parts
-
Element14
$7.499
$7.329
DigiKey
$11.750
$8.489
$7.217
Newark
$16.660
$12.980
$11.440
Powell Electronics
$7.520
$7.060
Nova Conductors
$4.525
Vyrian
Amar Radio Corporation
LWI Electronics Inc
Van Brakel Electronic
Corohmni
$3.449
Aztec Data Supply Inc.
$3.906
Continental Prestige Electronics
$5.870
$4.400
$4.040
Argo Parts USA
Perfect Parts
Low insertion loss ensures minimal signal loss and interference, making this connector ideal for high-frequency applications.
Gold termination contact finish provides excellent conductivity and corrosion resistance, ensuring a reliable and durable connection.
Threaded coupling offers a secure and stable connection, suitable for applications where vibration or movement may occur.
Insulator made of PTFE provides excellent electrical and thermal properties, ensuring high performance and reliability.
RF SMA connector is a widely used standard in RF and microwave applications, ensuring compatibility with various devices and systems.
Low VSWR of 1.05 indicates minimal signal reflections and efficient power transfer, resulting in high-quality signal transmission.
Cable mounting type allows for easy installation and flexibility in connecting to different devices or systems.
Standard 50 ohm impedance ensures compatibility with a wide range of RF components and systems, reducing signal mismatch and reflections.
Solder termination provides a secure and reliable connection, suitable for applications where vibration or movement may occur.
Male contact gender is commonly used for connections that require insertion into a female connector, ensuring compatibility and secure mating.
Plug-style connector offers a simple and easy-to-use design, suitable for quick connections and disconnects in various applications.
Straight mounting style provides a direct and secure connection, ideal for applications where a straight line connection is required.
High maximum operating frequency of 18 GHz allows for use in high-frequency applications, ensuring reliable signal transmission and performance.
SSMA Connectors R125055002 attributes and parameters. Explore more SSMA Connectors devices from Radiall S A
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
R125055002 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5935-00-632-6345, 5935006326345
NIIN
006326345
Since 1952, we have been enabling the future and collaborating with our customers to succeed. We have developed an award winning reputation and established strong relationships with our customers by providing innovative solutions. Part of being the best is supplying products that customers can trust for unrivaled repeatability and reliable performance. That’s why we’ve invested in facilities around the world that specialize in manufacturing capabilities critical to manufacturing the finest interconnect components to support your most demanding applications. Our commitment is to continue to be the market leader you rely on – in every region around the world – so that you can be the leader in your field.
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
23_SMA-50-0-324/111_NY
Huber+suhner Ag
23_SMA-50-0-324/111_NY by Huber+suhner Ag is a threaded RF SMA connector with a characteristic impedance of 50 ohm, suitable for panel mounting. With a max operating frequency of 18 GHz and durability of 500 cycles, it is commonly used in commercial applications requiring reliable signal transmission.
R125.176.000
Radiall S A
R125.176.000 by Radiall S A is an RF SMA connector with a characteristic impedance of 50 ohm and insertion loss of 0.53 dB, suitable for RG-223 cables. It features a threaded coupling type, gold shell finish, and PTFE insulator material, making it ideal for applications requiring durability up to 500 cycles at temperatures ranging from -65 to 165 °C.
5972-3CC
Carlisle Interconnect Technologies
The Carlisle Interconnect Technologies 5972-3CC is an RF SMA connector with a 0.31" body depth, gold shell finish, and PTFE insulator. It features a polarized housing, stainless steel shell material, and female contact gender for commercial reliability. Ideal for straight mounting applications requiring a coaxial connection with locking option.
1052552-1
Tyco Electronics Amp
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Contact Material: BERYLLIUM COPPER; Termination Contact Finish: GOLD;
132139
Amphenol
Amphenol 132139 is an RF SMA connector with threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for panel mounting applications, it features a solder termination and female contact gender in a jack body style.
Connecting Devices
RF SMA CONNECTOR; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Manufacturer Series: SMA; Panel Mount: YES; Mating Contact Finish: GOLD (50);
142-0711-301
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; DIN Conformance: NO; IEC Conformity: NO;
901-9501-3
Amphenol 901-9501-3 is an RF SMA connector with 0.11 dB insertion loss, GOLD termination contact finish, and threaded coupling type. Ideal for applications requiring a 50 ohm characteristic impedance, such as cable mounting in straight plug configurations up to 12.4 GHz frequency.
1-1478908-0
TE Connectivity
TE Connectivity 1-1478908-0 is an RF SMA connector with threaded coupling, suitable for RG-174A/U, RG-188A/U, and RG-316/U cables. Featuring a 50 ohm impedance, it has a stainless steel shell with gold finish and operates b/w -65 to 165°C. Ideal for applications requiring a male plug coax contact at frequencies up to 26 GHz.
2052-1201-00
TE Connectivity's 2052-1201-00 SSMA Connector features a threaded coupling type, PTFE insulator material, and gold shell finish. With an insertion loss of 0.13 dB and VSWR of 1.14, it is ideal for RF applications up to 18 GHz. This commercial-grade connector has a temperature range from -65°C to 125°C, making it suitable for various industrial settings.
142-0701-301
Bel Fuse
Bel Fuse's 142-0701-301 SSMA Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and -65 to 165 °C Operating Temperature. Ideal for RF applications up to 18 GHz, this durable connector with POLYTETRAFLUOROETHYLENE insulator is designed for commercial use in board mounting setups.
R125325000
R125325000 by Radiall S A is an RF SMA Connector with a 50 ohm impedance and 0.02 dB insertion loss. Featuring gold termination contacts, it has a VSWR of 1.05 and operates up to 18 GHz. Ideal for panel mount applications, this threaded connector is commonly used in high-frequency communication systems.
142-0801-806
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
132134-11
Amphenol 132134-11 is a RF SMA connector with threaded coupling, suitable for board mounting. Features include gold shell finish, PTFE insulator, and brass shell material. With 50 ohm impedance and max frequency of 18 GHz, it's ideal for high-frequency applications in temperatures ranging from -65 to 165°C.
5-1814832-2
TE Connectivity's 5-1814832-2 SSMA Connector features a threaded coupling type, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 3 GHz, this connector has a zinc alloy shell with gold finish and is designed for board mounting with solder termination.
901-9870
Amphenol 901-9870 is an RF SMA connector with 0.25 dB insertion loss, 1400VAC dielectric voltage, and gold termination. Ideal for RG-58A/U cables in commercial applications, it operates b/w -65 to 165 °C with a max frequency of 12.4 GHz.
142-0701-841
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-C-39012; Filter Feature: NO; DIN Conformance: NO;
142-0701-871
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Maximum Operating Frequency: 18 GHz; Body or Shell Style: RECEPTACLE;
142-0701-801
Bel Fuse's 142-0701-801 SSMA Connector features a dielectric voltage of 1400VAC, insulation resistance of 5000000000 ohm, and operates b/w -65 to 165 °C. Ideal for RF applications up to 18 GHz, this female connector with brass shell is durable for 500 cycles in commercial settings.
901-144-3
Amphenol 901-144-3 is an RF SMA connector with 0.13 dB insertion loss, 1.25 VSWR, and 50 ohm impedance. It features gold termination contact finish and threaded coupling type for board mounting applications up to 18 GHz in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R125.426.000
Radiall S A's R125.426.000 is an RF SMA connector with a threaded coupling type and a characteristic impedance of 50 ohm. It has a max operating frequency of 18 GHz and is suitable for commercial applications.
R125426000
R125426000 by Radiall S A is a SSMA Connector with 50 ohm impedance, 0.21 dB insertion loss, and 1.12 VSWR. It is used in RF applications up to 18 GHz, featuring gold over nickel finish, PTFE insulator, and female contact gender for durability and reliability in commercial settings.
R125464270
Radiall S A's R125464270 is a RF SMA Connector with 50 ohm impedance, 0.296 dB insertion loss, and 1.16 VSWR. Ideal for applications up to 18 GHz, it features gold termination on a PTFE insulator in a panel mount receptacle design.
R125.464.270
Radiall S A's R125.464.270 RF SMA Connector features 50 ohm impedance, 0.3 dB insertion loss, and 18 GHz operating frequency for high-performance RF applications. With a durability of 500 cycles and gold finish, it is ideal for commercial use in telecommunications and aerospace industries. The connector has a threaded coupling type, PTFE insulator material, and can withstand temperatures from -65 to 165 °C.
R125464271
The Radiall S A R125464271 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.296 dB and high VSWR of 1.16, suitable for applications up to 18 GHz. This panel mount receptacle with PTFE insulator is ideal for high-frequency communication systems.
R125.464.271
Radiall S A's R125.464.271 SSMA Connector features 0.3 dB insertion loss, 1.1 VSWR, and 50 ohm impedance for up to 18 GHz applications. With a gold over nickel finish, this threaded RF SMA connector is panel mountable and ideal for high-frequency signal transmission in various industries.
R125.464.270W
R125.464.270W by Radiall S A is an RF SMA connector with 50 ohm impedance, 0.07 dB insertion loss, and 18 GHz operating frequency. Ideal for panel mounting in commercial applications, it offers high durability with a gold shell finish and can withstand temperatures from -65 to 165 °C.
R125.426.000W
R125.426.000W by Radiall S A is a RF SMA CONNECTOR with 50 ohm impedance, 0.05 dB insertion loss, and 1.04 VSWR. It is ideal for board mounting applications in commercial settings, offering durability of 500 cycles and operating frequency up to 18 GHz.
R125.464.274
The Radiall S A R125.464.274 is an RF SMA connector with a threaded coupling type and 50 ohm impedance. It features a low insertion loss of 0.3 dB and a VSWR of 1.1, making it ideal for applications requiring high-frequency signal transmission up to 18 GHz, such as in telecommunications and aerospace industries.
R125464274
The Radiall S A R125464274 is an RF SMA Connector with a threaded coupling type and gold termination contact finish. It features a low insertion loss of 0.18 dB and a VSWR of 1.12, making it ideal for applications requiring high-frequency performance up to 18 GHz in industries such as telecommunications and aerospace.
R125464275
The Radiall S A R125464275 SSMA Connector has a low insertion loss of 0.18 dB and a VSWR of 1.12, suitable for applications up to 18 GHz. With threaded coupling type and PTFE insulator material, it is a female receptacle connector with 50 ohm impedance for panel mounting in RF SMA applications.
R125680000
R125680000 by Radiall S A is a RF SMA connector with 50 ohm impedance, gold termination, and PTFE insulator. It operates b/w -65 to 165 °C, suitable for applications up to 18 GHz requiring panel mount connectors with threaded coupling.
R125.680.000
Radiall S A's R125.680.000 SSMA Connector features 5000000000 ohm Insulation Resistance, 0.3 dB Insertion Loss, and 1414VAC Dielectric Withstanding Voltage. Ideal for RF applications up to 18 GHz, this gold-finished connector has a characteristic impedance of 50 ohm and operates b/w -65°C to 165°C.
R125.238.000
Radiall S A's R125.238.000 is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a low insertion loss of 0.21 dB and can operate at frequencies up to 12.4 GHz, making it suitable for high-frequency applications in the telecommunications industry.
R125238000
RF SMA CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Additional Features: STANDARDS: MIL-C-39012; IEC 169-1, APPLICABLE CABLES: RG 55; RG 142; RG 223; RG 400/U; Filter Feature: NO; Mounting Type: CABLE;
R125326000
The Radiall S A R125326000 SSMA Connector features 0.1 dB insertion loss, 50 ohm impedance, and 18 GHz operating frequency. Ideal for RF applications, it has a threaded coupling type and gold-plated termination for low VSWR. Suitable for panel or cable mounting with solder termination in female jack configuration.
R125.326.000
R125.326.000 by Radiall S A is a RF SMA connector with 50 ohm impedance, 0.13 dB insertion loss, and 18 GHz operating frequency. Ideal for commercial applications, it features gold-plated contacts, PTFE insulator, and can withstand temperatures from -65 to 105 °C.
R125076001
The Radiall S A R125076001 SSMA Connector features 1.08 dB insertion loss, 1.06 VSWR, and 50 ohm impedance. Ideal for RF applications up to 18 GHz, this threaded connector with PTFE insulator is a male plug suitable for cable mounting with crimp termination.
R125.076.001
Radiall S A R125.076.001 is an RF SMA connector with 50 ohm impedance, 0.21 dB insertion loss, and 1.27 VSWR. It features gold over nickel termination for crimp applications up to 12.4 GHz in cable assemblies requiring threaded coupling for high-frequency signal transmission.
R125.462.001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved