Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Maximum Input Trigger Current: .01 A; Peak Surge Current: 1 A;
Median Price
$0.462
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.370
RS (Exports)
$0.553
$0.521
Freelance Electronics
$0.240
American Microsemiconductor Inc.
$0.540
Forefront Electronics and Design
$1.230
Vyrian
M&R Communications
J2 Sourcing AB
EMSNET
PC Components Company LLC
Digiode
Elcom Components
Bristol Electronics
Holdelec - ElecDif-Pro
Sea View Technologies
Ack Elektronik San.Tic.Ltd.Sti
Mil-Aero Solutions, Inc.
ECAB
Nova Conductors
Inventory MP
DF Sales Co.
Prism Electronics
Manotoh
LittleDiode
QIE Inc.
LWI Electronics Inc
Aztec Data Supply Inc.
$0.070
Ampacity Inc.
$0.211
Advanced Electronics
$0.343
$0.316
$0.296
Perfect Parts
Lixinc
Argo Parts USA
Continental Prestige Electronics
Infinite Electronics LLP (Excess)
Supply Digital
Corphita
GreenTree Electronics
Assy Fe
Aranea Global
Optocoupler Trigger Device Outputs MOC3042 attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Qt Optoelectronics
Maximum Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Sub-Category:
Terminal Finish:
MOC3042 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
1554216004
Molex
WIRE AND CABLE;
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bharat Electronics
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
IL4108
The Vishay Intertechnology IL4108 is a single optocoupler trigger device with a max forward current of 0.06A and a min peak off-state voltage of 800V. It operates b/w -55°C to 100°C, providing an isolation voltage of 5300V. Ideal for applications requiring TRIAC output optocouplers with zero cross over sensitivity.
VO4258H-X006
VO4258H-X006 by Vishay Intertechnology is a single TRIAC output optocoupler with max operating temp of 100°C. It offers 800V peak repetitive off-state voltage and 5300V isolation voltage. Ideal for applications requiring through-hole mounting and up to 0.3A on-state current.
MOC3042M
The Onsemi MOC3042M is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for triggering devices, it operates b/w -40 to 85°C, offers 7500V isolation voltage, and has a max forward current of 0.06A.
VOM160RT
Vishay Intertechnology's VOM160RT is a TRIAC output optocoupler with 1A peak surge current, 600V repetitive off-state voltage, and 3750V isolation voltage. Ideal for applications requiring surface mounting feature, it operates b/w -40°C to 100°C and has a max on-state current of 0.07A.
IL4208-X009
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A; Nominal Input Trigger Current: 1 mA; Additional Features: UL RECOGNIZED;
IL4108-X016
The Vishay Intertechnology IL4108-X016 is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, has an isolation voltage of 5300V, and is ideal for applications requiring optocoupler trigger device outputs.
BRT23H-X007
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3; Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 800 V;
MOC3083SM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Maximum Reverse Leakage Current: .0001 A; Minimum Peak Off-state Voltage: 800 V;
BRT12H-X001
Siemens
TRIGGER OUTPUT OPTOCOUPLER; Minimum Peak Off-state Voltage: 600 V; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 5300 V; Maximum On State Current: .3 A;
BRT13-H-X009
Vishay Intertechnology's BRT13-H-X009 is a single TRIAC output optocoupler with 2.3V max on-state voltage, 3A peak surge current, and 100°C max operating temp. Ideal for applications requiring high isolation voltage of 5300V, such as industrial control systems and power supplies.
BRT23H-X001
TRIGGER OUTPUT OPTOCOUPLER; No. of Elements: 1; Configuration: SINGLE; Nominal Input Trigger Current: 2 mA; Minimum Operating Temperature: -40 Cel; Maximum On State Current: .3 A;
MOC3083
Motorola
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 7500 V; Configuration: SINGLE; No. of Elements: 1; Minimum Operating Temperature: -40 Cel;
MOC3033SR2M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 250 V; No. of Elements: 1; Nominal Input Trigger Current: 5 mA;
MOC3023TVM
The Onsemi MOC3023TVM is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
IL410-X016
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 600 V; No. of Elements: 1; JESD-609 Code: e3; Maximum Isolation Voltage: 5300 V;
VO4258M-X006
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .3 A; Maximum Forward Current: .06 A; No. of Elements: 1; Maximum Isolation Voltage: 5300 V;
IL4208-X017T
Vishay Intertechnology's IL4208-X017T is a single optocoupler with peak surge current of 3A and max forward current of 0.06A. Ideal for triggering devices, it operates b/w -55°C to 100°C, offering high isolation voltage of 5300V and repetitive off-state voltage of 800V.
FOD4108SDV
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Operating Temperature: 100 Cel;
FOD4218TV
FOD4218TV by Onsemi is a TRIAC output optocoupler with max on-state voltage of 3V, peak surge current of 3A, and max forward current of 0.03A. Ideal for applications requiring optocoupler trigger device outputs in temperatures ranging from -55°C to 100°C.
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Minimum Peak Off-state Voltage: 600 V; Maximum On State Current: .3 A; Additional Features: HIGH SENSITIVITY, UL APPROVED; Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MOC3063SM
Isocom Components
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 5 mA; Maximum Operating Temperature: 85 Cel; Peak Surge Current: 1 A;
The Onsemi MOC3063SM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has a repetitive off-state voltage of 600V, and offers isolation up to 4170V. Ideal for triggering devices in applications requiring high-voltage protection and signal isolation.
MOC3063S-TA1
Lite-on Technology
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Forward Current: .05 A; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
MOC3052SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Configuration: SINGLE; Maximum Input Trigger Current: .01 A;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Nominal Input Trigger Current: 10 mA; No. of Elements: 1; Maximum Forward Current: .05 A; JESD-609 Code: e3;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
MOC3043M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .1 A;
The Onsemi MOC3043M is a single optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for triggering devices, it operates b/w -40 to 85°C, offers 7500V isolation voltage, and has a max input trigger current of 0.005A.
MOC3023SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Peak Surge Current: 1 A; Minimum Peak Off-state Voltage: 400 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; JESD-609 Code: e3; Configuration: SINGLE; Maximum On State Voltage: 3 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 400 V; Maximum Forward Current: .06 A; Minimum Operating Temperature: -40 Cel;
MOC3021SM
Harris Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Leakage Current: .0000001 A; Repetitive Off-state Voltage (Peak): 400 V; Maximum Input Trigger Current: .015 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Repetitive Off-state Voltage (Peak): 400 V; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Minimum Peak Off-state Voltage: 400 V; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Peak Surge Current: 1 A; Maximum Operating Temperature: 100 Cel; Maximum Reverse Leakage Current: .0001 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Input Trigger Current: .015 A; Peak Surge Current: 1 A; Configuration: SINGLE;
MOC3063SR2VM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Peak Surge Current: 1 A; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Peak Off-state Voltage: 600 V;
MOC3083SR2M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Voltage: 3 V; No. of Elements: 1; Maximum Reverse Leakage Current: .0001 A;
Qt Optoelectronics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved