Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi MOC3061TVM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 7500V, operating temperature range from -40 to 85 °C, and through-hole mounting.
Median Price
$0.666
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.397
1k+ parts
$0.385
10k+ parts
-
Farnell
$0.696
$0.381
$0.338
Newark
$0.855
$0.491
$0.356
Element14
$1.060
$0.650
$0.577
Chip1Stop
$0.302
Verical
Future Electronics
$0.250
$0.240
Digiode
$0.405
Nova Conductors
$0.550
NAC Semi
$0.417
Vyrian
IBS Electronics
$0.325
$0.312
Flip Electronics
Sinequanon
Ampacity Inc.
$0.257
Semicontronic
$0.251
$0.249
Corohmni
Corphita
$0.383
Aztec Data Supply Inc.
$0.479
Argo Parts USA
$0.534
Continental Prestige Electronics
$0.539
Netroflash
$0.523
$0.512
Component Stockers USA
$1.100
$0.570
$0.420
Andel Nordic
$5.781
$5.550
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Authorized Procurement Solutions
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Supply Digital
Glotronic Ltd.
UHIMA Technologies
Low on state voltage helps in efficient operation and power savings.
Single configuration simplifies installation and circuit design.
High surge current capability ensures the device can handle sudden spikes in current.
Suitable forward current rating for various applications.
Optocoupler with TRIAC output and zero-crossing feature for precise switching.
Wide operating temperature range for reliability in various environments.
Can operate in extreme low temperatures without issues.
TIN terminal finish for good solderability and durability.
Low trigger current needed for activation, reducing power consumption.
High off-state voltage rating for safe and reliable operation.
Nominal trigger current ensures consistent performance.
Low reverse leakage current for improved efficiency.
High off-state voltage rating for safety and reliability.
High isolation voltage for protection against voltage spikes and surges.
Through hole mounting for secure and stable installation.
Optocoupler Trigger Device Outputs MOC3061TVM attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
Sub-Category:
Terminal Finish:
MOC3061TVM Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Hitachi
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
Bytesonic Electronics
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Dc Components
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BRT13H-X007
Vishay Semiconductors
TRIGGER OUTPUT OPTOCOUPLER; Minimum Peak Off-state Voltage: 800 V; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .02 A; Nominal Input Trigger Current: 2 mA;
MOC3043XSM
Isocom Components
MOC3043XSM by Isocom Components is a single optocoupler with triac output. It has a max forward current of 0.05A, isolation voltage of 5300V, and trigger current of 5mA. Ideal for applications requiring high voltage isolation and precise triggering in temperatures ranging from -40°C to 100°C.
FODM3062
The Onsemi FODM3062 is a single TRIAC output optocoupler with max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 to 100 °C, has isolation voltage of 3750V, and peak off-state voltage of 600V. Ideal for triggering devices in applications requiring high isolation levels and surface mounting feature.
MOC3052
Motorola
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 7500 V;
IL4118-X016
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Maximum Operating Temperature: 100 Cel; Maximum On State Current: .3 A; Minimum Operating Temperature: -55 Cel; Additional Features: HIGH SENSITIVITY, UL APPROVED; Nominal Input Trigger Current: .7 mA;
TLP161J(TPR,U,C,F)
Toshiba
Toshiba's TLP161J optocoupler has a max on-state voltage of 2.8V, peak surge current of 1.2A, and isolation voltage of 2500V. Ideal for triggering devices in applications requiring high electrical isolation and low forward current consumption.
TLP268J
Toshiba TLP268J is a single optocoupler with peak surge current of 1.2A and max forward current of 0.0075A. Ideal for applications requiring TRIAC output, it offers high isolation voltage of 3750V and can operate in temperatures ranging from -25 to 85°C.
FODM3062R2V
FODM3062R2V by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, has an isolation voltage of 3750V, and is ideal for optocoupler trigger device outputs in various applications.
MOC3073M
The Onsemi MOC3073M is a TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85 °C, has an isolation voltage of 4170V, and is ideal for triggering devices in applications requiring high voltage protection.
IL4208-X009
Siemens
TRIAC OUTPUT OPTOCOUPLER; Nominal Input Trigger Current: 1 mA; Configuration: SINGLE; Maximum Forward Current: .06 A; Maximum On State Current: .3 A; Minimum Peak Off-state Voltage: 800 V;
TLP525G(F)
Toshiba's TLP525G(F) is a TRIAC OUTPUT OPTOCOUPLER with 3V On State Voltage, 1.2A Surge Current, and 2500V Isolation Voltage. Ideal for applications requiring optocoupler trigger device outputs in temperatures ranging from -40°C to 100°C.
VOT8024AB-T1
Vishay Intertechnology
Vishay Intertechnology's VOT8024AB-T1 is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 5300V, such as trigger device outputs in industrial electronics. Operating temperature ranges from -55 to 110°C, making it suitable for various environments.
IL420-X007
TRIAC OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum On State Current: .3 A; Maximum Isolation Voltage: 5300 V; Additional Features: HIGH SENSITIVITY, UL APPROVED; Minimum Peak Off-state Voltage: 600 V;
MOC3052S
Lite-on Technology
TRIAC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; Nominal Input Trigger Current: 10 mA; No. of Elements: 1; Maximum Operating Temperature: 100 Cel; Minimum Peak Off-state Voltage: 600 V;
FOD42160
The Onsemi FOD42160 is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 °C to 100°C, with an isolation voltage of 5000V. Ideal for applications requiring optocoupler trigger device outputs in through-hole mounting configurations.
MOC3023
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; No. of Elements: 1; Additional Features: UL RECOGNIZED, INTERFACING MICROPROCESSOR; JESD-609 Code: e0;
MOC3033SR2VM
MOC3033SR2VM by Onsemi is a single optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for triggering devices, it operates b/w -40 to 85 °C, offers 250V repetitive off-state voltage, and has an isolation voltage of 4170V. Great for surface mount applications.
FODM3062V
FODM3062V by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
FOD4216SDV
FOD4216SDV by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 °C to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high electrical isolation.
MOC3022X
The Isocom Components MOC3022X is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40°C to 100°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high electrical isolation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MOC3063SM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 5 mA; Maximum Operating Temperature: 85 Cel; Peak Surge Current: 1 A;
The Onsemi MOC3063SM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has a repetitive off-state voltage of 600V, and offers isolation up to 4170V. Ideal for triggering devices in applications requiring high-voltage protection and signal isolation.
MOC3063S-TA1
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Forward Current: .05 A; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
MOC3052SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Configuration: SINGLE; Maximum Input Trigger Current: .01 A;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Nominal Input Trigger Current: 10 mA; No. of Elements: 1; Maximum Forward Current: .05 A; JESD-609 Code: e3;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
MOC3043M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .1 A;
The Onsemi MOC3043M is a single optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for triggering devices, it operates b/w -40 to 85°C, offers 7500V isolation voltage, and has a max input trigger current of 0.005A.
MOC3023SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Peak Surge Current: 1 A; Minimum Peak Off-state Voltage: 400 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; JESD-609 Code: e3; Configuration: SINGLE; Maximum On State Voltage: 3 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 400 V; Maximum Forward Current: .06 A; Minimum Operating Temperature: -40 Cel;
MOC3021SM
Harris Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Leakage Current: .0000001 A; Repetitive Off-state Voltage (Peak): 400 V; Maximum Input Trigger Current: .015 A;
Texas Instruments
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Repetitive Off-state Voltage (Peak): 400 V; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Minimum Peak Off-state Voltage: 400 V; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Peak Surge Current: 1 A; Maximum Operating Temperature: 100 Cel; Maximum Reverse Leakage Current: .0001 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Input Trigger Current: .015 A; Peak Surge Current: 1 A; Configuration: SINGLE;
MOC3063SR2VM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Peak Surge Current: 1 A; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Peak Off-state Voltage: 600 V;
MOC3083SR2M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Voltage: 3 V; No. of Elements: 1; Maximum Reverse Leakage Current: .0001 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved