Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; JESD-609 Code: e0; Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 400 V;
Median Price
$0.300
Lifecycle Status
Suppliers In-Stock
53
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.680
100+ parts
$0.334
1k+ parts
$0.275
10k+ parts
$0.225
DigiKey
$1.220
$0.670
$0.538
$0.451
Verical
-
$0.335
Arrow
$0.246
$0.227
$0.173
Future Electronics
$0.189
$0.181
Chip1Stop
RS (Exports)
Digiode
$0.168
Nova Conductors
$0.199
NAC Semi
$0.351
$0.255
$0.237
American Microsemiconductor Inc.
$0.400
Bristol Electronics
$0.528
$0.195
$0.137
TME
$0.559
$0.203
$0.183
Forefront Electronics and Design
$1.230
Component Electronics Inc.
$1.540
$1.150
$1.000
Chip Stock
Dan-Mar Components
Vyrian
Cyclops Electronics Ltd
IBS Electronics
$0.188
Rutronik
$0.224
$0.180
Schukat
$0.175
$0.152
Lantek
ACDS - Activité Composants Distribution Service
Micros sp.j. W. Kędra i J. Lic
$0.148
$0.141
Micros
$0.144
MRC Electronics
Euro-Tech
ComSIT Distribution GmbH
Holdelec - ElecDif-Pro
J & M Industries LLC
R&J Components
ABC Electronics Ltd.
Prism Electronics
M&R Communications
Classic Components Corporation
Electronic Expediters
Extreme Components
Rebound Electronics
EZ Electronic Parts
Electronics Depot
Q Components
Florida Circuit
Odintec Ltd.
MISTER SPROCKETS
Resion
Elcom Components
LittleDiode
ECAB
Microfarads
Sogenti Electronics
GES GmbH
Manoshevitz Elec. Sales
Semicontronic
$0.133
$0.130
$0.129
Ampacity Inc.
$0.150
Corphita
$0.159
Corohmni
$0.197
Continental Prestige Electronics
Argo Parts USA
$0.193
Netroflash
$0.185
Component Stockers USA
$0.200
$0.190
$0.170
$0.220
Advanced Electronics
$0.232
$0.209
Parana Technologies
$0.419
$1.596
DigiPath Technology Company
$0.462
$0.425
ChromeModa Solutions
$0.471
$0.386
IDEA Electronic Components Group
$0.424
Aztec Data Supply Inc.
$0.747
iodParts Technologies Inc.
Kepictronics
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Infinite Electronics LLP (Excess)
GreenTree Electronics
Supply Digital
S.R.D Solutions
Assy Fe
Authorized Procurement Solutions
Glotronic Ltd.
Cyclops Electronics Ltd (Excess)
Futuretech Components
ChipstoGo Electronic ltd
A-Plus Industry Inc.
Optocoupler Trigger Device Outputs MOC3023 attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Qt Optoelectronics
Additional Features:
Configuration:
Maximum Forward Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Terminal Finish:
MOC3023 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
NSN
5980-01-412-2886, 5980014122886
NIIN
014122886
EU2B-YS3103F
Idec
ROTARY SWITCH;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Electronic Devices
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
Daco Semiconductor
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
MOC3052SMT&R
Isocom Components
MOC3052SMT&R by Isocom Components is a single TRIAC output optocoupler with a max forward current of 0.05A and isolation voltage of 5300V. It operates b/w -40°C to 100°C, ideal for triggering devices in various applications requiring high voltage protection and signal isolation.
TLP160J
Toshiba
Toshiba's TLP160J is a TRIAC output optocoupler with max. forward current of 0.025A, isolation voltage of 2500V, and on-state current of 0.07A. Ideal for applications requiring high voltage protection and signal isolation in industrial electronics due to its robust design and wide operating temperature range from -25°C to 85°C.
TLP3052A(TP1,F
Toshiba's TLP3052A(TP1,F is a single TRIAC output optocoupler with peak surge current of 1.2A, max forward current of 0.025A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high voltage protection and surface mounting feature.
MOC3022SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5300 V; Maximum Input Trigger Current: .01 A; Minimum Peak Off-state Voltage: 400 V;
MOC3021VM
Onsemi
The Onsemi MOC3021VM is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
NTE3047
Nte Electronics
NTE3047 by Nte Electronics is a SINGLE TRIAC OUTPUT OPTOCOUPLER with 0.06A max forward current, 8mA trigger current, and 7500V isolation voltage. It operates b/w -55°C to 100°C, making it ideal for applications requiring high isolation and precise triggering in various electronic circuits.
MOC3073SVM
MOC3073SVM by Onsemi is a single TRIAC output optocoupler with max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has isolation voltage of 4170V, and is ideal for triggering devices in various applications.
MOC3011
TRIAC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel; Additional Features: UL APPROVED; Maximum Forward Current: .05 A; Minimum Peak Off-state Voltage: 250 V;
FODM3052
The Onsemi FODM3052 is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 °C to 100°C, has an isolation voltage of 3750V, and is suitable for applications requiring optocoupler trigger device outputs in surface mount configurations.
TLP3062AF(D4,F(O
Toshiba's TLP3062AF(D4,F(O) is a single TRIAC output optocoupler with 3V max on-state voltage, 1.2A peak surge current, and 600V repetitive off-state voltage. Ideal for applications requiring high isolation voltage (5000V), such as industrial control systems and power supplies.
MOC3072SVM
MOC3072SVM by Onsemi is a TRIAC output optocoupler with 2.5V max on-state voltage, 1A peak surge current, and -40 to 85°C operating temperature range. Ideal for triggering devices in optoelectronic applications requiring high isolation voltage of 4170V and surface mounting feature.
BRT12H-X001
Vishay Semiconductors
TRIGGER OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: 2 mA; Configuration: SINGLE;
FOD4218TV
FOD4218TV by Onsemi is a TRIAC output optocoupler with max on-state voltage of 3V, peak surge current of 3A, and max forward current of 0.03A. Ideal for applications requiring optocoupler trigger device outputs in temperatures ranging from -55°C to 100°C.
4N393S
4N393S by Fairchild Semiconductor is an SCR output optocoupler with a max on-state voltage of 1.3V and peak surge current of 10A. It operates b/w -55°C to 100°C, with a max isolation voltage of 5300V. Ideal for applications requiring high isolation and triggering devices in various electronic circuits.
FOD4216SDV
FOD4216SDV by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 °C to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high electrical isolation.
MOC3043M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .1 A;
FODM3012_NF098
FODM3012_NF098 by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40°C to 100°C, has an isolation voltage of 3750V, and is ideal for applications requiring optocoupler trigger device outputs in surface mount configurations.
MOC3052SR2M
The Onsemi MOC3052SR2M is a single TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in applications requiring high voltage protection.
MOC3071SR2VM
MOC3071SR2VM by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 4170V, and is ideal for triggering devices in optocoupler applications.
MOC3082SM
The Onsemi MOC3082SM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 7500V, operating temperature range from -40 to 85 °C, and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MOC3063SM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 5 mA; Maximum Operating Temperature: 85 Cel; Peak Surge Current: 1 A;
The Onsemi MOC3063SM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has a repetitive off-state voltage of 600V, and offers isolation up to 4170V. Ideal for triggering devices in applications requiring high-voltage protection and signal isolation.
MOC3063S-TA1
Lite-on Technology
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Forward Current: .05 A; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
MOC3052SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Configuration: SINGLE; Maximum Input Trigger Current: .01 A;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Nominal Input Trigger Current: 10 mA; No. of Elements: 1; Maximum Forward Current: .05 A; JESD-609 Code: e3;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
The Onsemi MOC3043M is a single optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for triggering devices, it operates b/w -40 to 85°C, offers 7500V isolation voltage, and has a max input trigger current of 0.005A.
MOC3023SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Peak Surge Current: 1 A; Minimum Peak Off-state Voltage: 400 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; JESD-609 Code: e3; Configuration: SINGLE; Maximum On State Voltage: 3 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 400 V; Maximum Forward Current: .06 A; Minimum Operating Temperature: -40 Cel;
MOC3021SM
Harris Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Leakage Current: .0000001 A; Repetitive Off-state Voltage (Peak): 400 V; Maximum Input Trigger Current: .015 A;
Texas Instruments
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Repetitive Off-state Voltage (Peak): 400 V; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Minimum Peak Off-state Voltage: 400 V; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Peak Surge Current: 1 A; Maximum Operating Temperature: 100 Cel; Maximum Reverse Leakage Current: .0001 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Input Trigger Current: .015 A; Peak Surge Current: 1 A; Configuration: SINGLE;
MOC3063SR2VM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Peak Surge Current: 1 A; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Peak Off-state Voltage: 600 V;
MOC3083SR2M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Voltage: 3 V; No. of Elements: 1; Maximum Reverse Leakage Current: .0001 A;
Qt Optoelectronics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved