Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 18.16 mm; Additional Features: HEIGHT DIMENSION INCLUDES TERMINALS ALSO; Application: GENERAL PURPOSE; Turns Ratio (Np:Ns): 1:1;
Median Price
$3.667
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Arrow
1+ parts
-
100+ parts
1k+ parts
$3.649
10k+ parts
Prism Electronics
Lakeland Logistics Inc
Bristol Electronics
Authorized Procurement Solutions
Kepictronics
Pulse & Datacom Transformers HX6096FNL attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulse Electronics
Additional Features:
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
HX6096FNL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Continental Device India
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Microsemi
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
IL-20-0001
Schurter Ag
IL-20-0001 by Schurter Ag is a 1.1W Pulse Transformer with 4000V isolation voltage and 1500ns max pulse rise time. Ideal for datacom applications, it features inductance of 3000uH, operates b/w -25 to 70°C, and has dimensions of L28.0xB23.0xH14.0mm for through-hole mounting.
749020011A
Wuerth Elektronik & Kg
749020011A by Wuerth Elektronik & Kg is a Pulse & Datacom Transformer with UL approval and 1500V isolation voltage. Featuring 1dB insertion loss, it has primary inductance of 350uH. Ideal for applications like LAN and 1000 BASE-T, this surface mount transformer operates b/w -40°C to 85°C.
78604/4MC
Murata Manufacturing
Murata Manufacturing's 78604/4MC is a UL-approved pulse transformer with 1000V isolation voltage, 100uH inductance, and 2:1 turns ratio. It is used in datacom applications for surface mounting, offering dimensions of L9.52xB9.0xH6.35mm and operating temperatures from 0 to 70°C.
750311624
Wurth Elektronik 750311624 is a Datacom Transformer with 2 primary windings, 9uH inductance, and 1500V isolation voltage. It operates b/w -40 to 125°C, outputs 15V at max current of 1A. Ideal for surface mount applications requiring high voltage isolation and efficient data transmission.
7328
Api Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 6.731 mm; No. of Functions: 2; Application: 10 BASE-T; Length: 11.43 mm;
96046122569
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEC; Minimum Operating Temperature: -40 Cel; Turns Ratio (Np:Ns): 1:1; Width: 13.5 mm;
78602/2JC
Murata Manufacturing's 78602/2JC is a pulse transformer with 1000V isolation voltage, 380uH primary inductance, and 10 V-us min ET product. It is used for datacom applications requiring surface mounting feature and a compact size of 6.35mm x 9mm x 12.7mm.
8461
8461 by Api Technologies is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 1500 V. With primary inductance of 350 uH, it is ideal for applications such as 10/100 BASE-TX LAN networks. This surface mount transformer has dimensions of L28.57 x W16.26 x H5.84 mm, making it suitable for compact electronic devices.
TG111-E12NYNLF
Halo Electronics
TG111-E12NYNLF by Halo Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L14.22xB7.62xH8.64 (mm). Ideal for AUTOMDIX and Ethernet applications, it operates b/w -40°C to 85°C temperature range and features a turns ratio of 1CT:1CT for surface mount installation.
ALT4532P-181-T05G
ALT4532P-181-T05G by TDK is a DATACOM TRANSFORMER with inductance of 180uH, suitable for 1000 BASE-T and 2.5/5G BASE-T LAN applications. It operates b/w -40°C to 105°C, with dimensions of 4.5mm x 3.2mm x 2.9mm for surface mount installation.
TST-9007
Beta Transformer Technology
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Maximum Operating Temperature: 130 Cel; Height: 7.11 mm; Application: GENERAL PURPOSE; Maximum Pulse Rise Time: 250 ns;
PM-DB2776
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; No. of Functions: 2; Height: 4.699 mm; Width: 10.16 mm;
HX5004NLT
Pulse Electronics
HX5004NLT by Pulse Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH primary inductance. It is designed for applications like 1000 BASE-T networks, operates b/w -40°C to 85°C, and has dimensions of L17.53xB12.2xH5.26 mm for surface mount assembly.
S558-5999-U7-F
Bel Fuse
Bel Fuse's S558-5999-U7-F is a Pulse & Datacom Transformer with 2 primary windings and 22 secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for LAN applications supporting 10/100 BASE-T networks, it operates b/w -40 to 85°C with dimensions L12.32xB7.24xH5.72mm for surface mount installation.
749022310
Wurth Elektronik 749022310 is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 150uH inductance. Ideal for 10/100/1000 BASE-T applications, it operates b/w -40°C to 85°C and has dimensions of 16.5mm x 10.3mm x 4.1mm for surface mount installation.
DA2320-ALB
Coilcraft
Coilcraft's DA2320-ALB is a pulse transformer with 1500V isolation voltage, 264uH primary inductance, and 24.5 V-us min ET product. Ideal for gate drive applications, this surface-mount transformer operates b/w -40 to 125°C with a compact size of L6.6xB5.0xH5.4 mm.
TG1G-E005J24LF
TG1G-E005J24LF by Halo Electronics is a DATACOM TRANSFORMER with 4 functions and 1500V isolation voltage. It has primary inductance of 350uH, dimensions L13.21xB12.19xH3.76 (mm), and turns ratio of 1CT:1CT. Ideal for 10/100/1000 BASE-T Ethernet applications, it operates b/w -40 to 85 °C temperature range.
TG110-RPE5N5LF
TG110-RPE5N5LF by Halo Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage. Measuring L12.7xB7.11xH6.35 (mm), it operates b/w -40 to 85 °C, ideal for 10/100 BASE-TX Ethernet applications. Features matte tin terminal finish and surface mounting feature.
74930000
74930000 by Wurth Elektronik is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for 10 BASE-T applications, it operates b/w -40°C to 105°C and has compact dimensions of 4.7mm x 3.22mm x 2.9mm for surface mount installation.
SM13072APEL
Bourns
SM13072APEL by Bourns is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and AEC-Q200 approval. Ideal for 10/100 BASE-T, ETHERNET, and LAN applications due to its compact L12.8xB6.9xH5.65mm size and surface mounting feature. Operating temperature ranges from -40°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
S558-5500-68
749022011
Wuerth
The Wurth Elektronik 749022011 is a Datacom Transformer with 1500V isolation voltage, 1dB insertion loss, and 350uH primary inductance. It is designed for LAN applications, operates b/w -40°C to 85°C, and features surface mounting with dimensions of L18.3xB12.2xH6.35mm.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved