Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 8.6 mm; Length: 23.37 mm; Minimum Operating Frequency: 200 KHz; Minimum Operating Temperature: -40 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SMPS Transformers PA0801.002NLT attributes and parameters. Explore more SMPS Transformers devices from Pulse Electronics
Height:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Power Rating:
Inductance (Primary):
Transformer Type:
Width:
PA0801.002NLT Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Taiwan Semiconductor
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Diodes Incorporated
MMBT3904-7-F
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
Synsemi
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
78253/55C
Murata Manufacturing
Murata Manufacturing's 78253/55C is a 1W SMPS Transformer with primary inductance of 600uH. Operating at -40 to 85°C, it has an output voltage of 5V and max frequency of 500KHz. Ideal for applications requiring a compact through-hole mount transformer with a nominal input voltage of 5V.
C1588-ALD
Coilcraft
Coilcraft's C1588-ALD is a 7W SMPS transformer with primary inductance of 155uH. It has two secondary windings, output voltage of 5V, and operates b/w -40 to 85°C. Ideal for surface mount applications with max input voltage of 72V and frequency up to 250KHz.
FA2671-ALD
Coilcraft's FA2671-ALD SMPS Transformer offers 10W power, 1500V isolation voltage, and 40uH primary inductance. Ideal for signal applications with a 3.3V output voltage, it operates b/w -40°C to 85°C and has a compact size of L15.24xB10.5xH11.43mm for surface mount installation.
PA2627NL
Pulse Electronics
PA2627NL by Pulse Electronics is a SMPS transformer with 2 primary windings and inductance of 50.5uH. It operates b/w -40 to 130°C, outputs 3.3V, and supports input voltages from 18-75V. Ideal for surface mount applications with dimensions L13.08xB15.24xH11.45mm and max frequency of 200KHz.
750032052
Wuerth Elektronik & Kg
750032052 by Wurth Elektronik is a SMPS Transformer with primary inductance of 10uH. Its compact dimensions of 28.7mm x 21.97mm x 11.43mm make it suitable for surface mount applications in various electronic devices requiring efficient power conversion.
DA2033-ALD
Coilcraft's DA2033-ALD is a SMPS transformer with 4 primary windings and 10uH inductance. It operates b/w -40 to 125°C, suitable for applications requiring a min input voltage of 3V and max of 24V. With dimensions L24.13xB17.4xH9.78 mm, it is designed for surface mounting in various power supply circuits.
POE70P-12LD
Coilcraft's POE70P-12LD is a 7W SMPS transformer with primary inductance of 155000uH. It has two windings for both primary and secondary, outputting 12V each. Ideal for surface mount applications in power supplies, it operates b/w -40 to 85°C with max input voltage of 72V and freq of 250KHz.
78250JVC-R
Murata Manufacturing's 78250JVC-R is a SMPS transformer with dimensions of 6.35mm x 9mm x 12.7mm for surface mount applications. It offers efficient power conversion, making it ideal for compact electronic devices requiring high-performance transformers in power supplies.
POE26W3.3VS5-R
Eaton Corporation
Eaton Corporation's POE26W3.3VS5-R is a 26W SMPS Transformer with primary inductance of 160uH, output voltage of 3.3V, and operating frequency up to 300KHz. Ideal for surface mount applications requiring compact dimensions and high efficiency power conversion.
PAD002-T764111S
Bourns
Bourns' PAD002-T764111S is a 1W SMPS Transformer with primary inductance of 475uH. Ideal for surface mount applications, it operates b/w -40°C to 125°C. With dimensions of 4mm x 6.55mm x 7.1mm, it's designed for power supplies and converters.
PA0367ANLT
PA0367ANLT by Pulse Electronics is a SMPS Transformer with 18uH inductance, suitable for surface mounting. It operates b/w -40°C to 130°C, making it ideal for various power supply applications. With dimensions of 5.2mm x 11.68mm x 11.68mm, it offers compact design and efficient performance.
HM110-C3W4V5LFTR
Tt Electronics Plc
HM110-C3W4V5LFTR by Tt Electronics Plc is a 3W SMPS Transformer with 2 primary windings and an inductance of 225uH. Ideal for applications requiring a surface mount transformer, it operates b/w -40°C to 125°C, making it suitable for various power supply designs.
ZA9644-AED
ZA9644-AED by Coilcraft is a SMPS transformer with inductance of 376uH, operating temperature range -40 to 85°C. It has output voltages of 6V and 28V, suitable for applications requiring surface mount transformers in power supplies with input voltage range of 4.5-60V.
Q4343-BL
Coilcraft Q4343-BL is a SMPS transformer with 85uH primary inductance and 500V isolation voltage. It has two secondary windings, outputting 12V each, suitable for power applications. With dimensions of L27.94xB27.94xH24.13 mm, it operates b/w -40°C to 85°C temperature range.
750311692
Wurth Elektronik 750311692 is a DATACOM TRANSFORMER with primary inductance of 80uH. It has two secondary windings, output voltages of ±150V, and operates b/w -40°C to 125°C. Ideal for SMPS applications due to its compact dimensions (L9.78xB9.14xH10.54 mm) and surface mounting feature.TR, EMBOSSED PLASTIC packing method makes it suitable for various electronic devices requiring an input voltage range of 8-15V.
POE30P-50LB
Coilcraft's POE30P-50LB is a 3W SMPS transformer with primary inductance of 310000uH. It has two windings for both primary and secondary, outputting 12V and 5V. Ideal for surface mount applications with operating temperatures ranging from -40 to 85°C.
B78304B1032A003
The TDK B78304B1032A003 is a SMPS transformer with inductance of 10000 uH, operating temperature range from -40 to 85 °C, and frequency range of 10 KHz to 1600 KHz. It is designed for surface mount applications in power supplies and converters.
B0570-BL
Coilcraft's B0570-BL SMPS Transformer has a power rating of 12W, primary inductance of 3400uH, and operates b/w -40°C to 85°C. Ideal for applications requiring a 12V output voltage, this transformer is designed with dimensions L27.94xB27.94xH24.13mm and features through-hole mounting in TRAY packaging.
PLA51LA32
Vishay Intertechnology
Vishay Intertechnology's PLA51LA32 is a 2000W SMPS Transformer with primary inductance of 128uH. Ideal for applications requiring output voltage of 30V, it operates b/w -55°C to 125°C. With dimensions of 22x53x70mm, it is designed for chassis mounting and supports frequencies up to 100KHz.
750311608
Wurth Elektronik 750311608 is a SMPS transformer with 2 primary windings, inductance of 12uH, and TR packing. It has secondary windings, L29.08xB23.11xH11.43mm dimensions, and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount transformer with an output voltage of 24V and input voltage range of 30-75V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved