Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 2.6 uH; Length: 23 mm;
Median Price
$11.300
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$9.470
1k+ parts
$8.523
10k+ parts
$8.390
Mouser Electronics
$7.930
$7.910
-
Avnet
$7.595
$7.014
Vyrian
ComSIT Distribution GmbH
Nova Conductors
Corohmni
$1.892
Ampacity Inc.
$5.680
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Authorized Procurement Solutions
SMPS Transformers VGT15SEFD-250S4A7 attributes and parameters. Explore more SMPS Transformers devices from TDK
Additional Features:
Approvals (V):
Height:
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Width:
VGT15SEFD-250S4A7 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
750311692
Wuerth Elektronik & Kg
Wurth Elektronik 750311692 is a DATACOM TRANSFORMER with primary inductance of 80uH. It has two secondary windings, output voltages of ±150V, and operates b/w -40°C to 125°C. Ideal for SMPS applications due to its compact dimensions (L9.78xB9.14xH10.54 mm) and surface mounting feature.TR, EMBOSSED PLASTIC packing method makes it suitable for various electronic devices requiring an input voltage range of 8-15V.
750315371
Wurth Elektronik 750315371 is a SMPS Transformer with inductance of 72uH, output voltage of 5V, and operating temperature range from -40 to 125°C. It is used for surface mount applications in electronics requiring compact dimensions and approvals like AEC-Q200, CSA, EN, IEC, UL.
ETH1-460LD
Coilcraft
Coilcraft's ETH1-460LD is a 120W SMPS transformer with 4 primary windings and an inductance of 350uH. It operates b/w -40°C to 85°C, suitable for various power applications. This surface mount transformer is ideal for compact designs requiring high power density.
PLA51LA32
Vishay Intertechnology
Vishay Intertechnology's PLA51LA32 is a 2000W SMPS Transformer with primary inductance of 128uH. Ideal for applications requiring output voltage of 30V, it operates b/w -55°C to 125°C. With dimensions of 22x53x70mm, it is designed for chassis mounting and supports frequencies up to 100KHz.
HM110-C3W4V5LFTR
Tt Electronics Plc
HM110-C3W4V5LFTR by Tt Electronics Plc is a 3W SMPS Transformer with 2 primary windings and an inductance of 225uH. Ideal for applications requiring a surface mount transformer, it operates b/w -40°C to 125°C, making it suitable for various power supply designs.
7491195212
7491195212 by Wurth Elektronik is a SMPS transformer with inductance of 21uH, 2 secondary windings, and max operating temp of 125°C. It has output voltages of 12V each and is suitable for applications requiring surface mount transformers in power supply circuits.
CTX02-14659
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L10.0XB12.0XH6.2 (mm); Inductance (Primary): 547 uH; No. of Winding (Secondary): 2; No. of Winding (Primary): 1;
YA9033-ALD
YA9033-ALD by Coilcraft is a 6W SMPS transformer with primary inductance of 25.6uH. It has two secondary windings and operates b/w -40°C to 85°C. This surface mount transformer is commonly used in power supply applications.
Q4436-BL
Coilcraft's Q4436-BL is a SMPS transformer with 22uH primary inductance and 500V isolation voltage. Ideal for power applications, it has two secondary windings, operates b/w -40°C to 85°C, and offers output voltages of 12V each.
PA0367ANL
Pulse Electronics
PA0367ANL by Pulse Electronics is a SMPS transformer with 18uH inductance, -40 to 130°C operating temp range. It's a surface mount type ideal for power supply applications due to its compact size and high efficiency design.
PL300-101L
Coilcraft PL300-101L is a 300W SMPS transformer with 2 primary windings, 448uH inductance, and AEC-Q200 approval. Ideal for applications requiring a nominal input voltage of 48V, operating at frequencies b/w 200KHz to 700KHz. Designed for surface mounting with dimensions of 29.46mm x 26.67mm x 10.4mm, suitable for temperatures ranging from -40°C to 125°C.
760390015
Wurth Elektronik 760390015 is a SMPS transformer with inductance of 475uH, output voltage of 5V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature, it has approvals including AEC-Q200, CUL, and UL for reliability in automotive and industrial electronics.
DA2032-ALD
Coilcraft's DA2032-ALD is a SMPS transformer with 4 primary windings, 10uH inductance, and 1500V isolation voltage. Ideal for power applications, it has a 3A output current and operates b/w -40 to 125°C. Dimensions are L17.2xB14.98xH8.89mm with surface mount feature and turns ratio of 1:10.
PA5130.001NLT
PA5130.001NLT by Pulse Electronics is a 25W SMPS Transformer with 2 primary windings at 80uH inductance. It operates b/w -40 to 125°C, outputting dual voltages of 3.3V each. Ideal for surface mount applications with a max frequency of 200 KHz.
PA1836NL
PA1836NL by Pulse Electronics is a SMPS transformer with 2 primary windings, inductance of 4.5uH, and dimensions L29.21xB21.84xH11.43 mm. It operates b/w -40 to 125°C, outputs 5V at max frequency of 200KHz, suitable for surface mount applications in power supplies with input voltage range of 9-36V.
POE51Q-12ED
Coilcraft's POE51Q-12ED is a 51W SMPS transformer with 22.2uH primary inductance, AEC-Q200 approval, and 2 secondary windings. Ideal for automotive applications, it operates b/w -40°C to 125°C, with output voltage of 12V.
YA9036-ALD
Coilcraft's YA9036-ALD is a 6W SMPS transformer with primary inductance of 24uH. It has 2 secondary windings, operates b/w -40 to 85°C, and outputs 24V. Ideal for surface mount applications in power supplies with input voltage range of 4-65V.
PA1137NLT
PA1137NLT by Pulse Electronics is a 13.5W SMPS Transformer with primary inductance of 126.7uH, suitable for surface mount applications. It operates b/w -40 to 130°C, has two primary windings, and outputs 5V at max frequency of 200 KHz.
750311307
Wurth Elektronik 750311307 SMPS Transformer has 2 primary windings with 100uH inductance. It is tape & reel packed, suitable for power applications with output voltages of 24V and a max input voltage of 36V. Dimensions are 15.24mm x 13.34mm x 11.43mm, operating temperature range from -40°C to 125°C, and terminal finish is Tin Silver.
7508170310
The Wurth Elektronik 7508170310 SMPS Transformer has an inductance of 1990 uH, output voltage of 12V, and operates b/w -40 to 125 °C. With a height of 11mm and width of 13.8mm, it is ideal for surface mount applications with input voltage ranging from 78V to 375V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VGT15SEFD-200S1A4
TDK
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 10 uH; Length: 15.6 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved