Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Minimum Operating Temperature: -60 Cel; Approvals (V): EAC; UL; Insulator Material: POLYAMIDE; MIL Conformity: NO;
Median Price
$26.235
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Dynamic Solutions
VNN
Vyrian
Aztec Data Supply Inc.
$4.751
Ampacity Inc.
$7.500
Corohmni
$7.559
AZTECH Wire
$16.565
Continental Prestige Electronics
$25.710
Netroflash
$24.923
$24.399
Allen Electronics Distributors
$27.660
$23.420
Argo Parts USA
Perfect Parts
Assembly Products 2802374 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Approvals (V):
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
Insulator Material:
MIL Conformity:
Maximum Operating Temperature:
Minimum Operating Temperature:
2802374 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3103F
Idec
ROTARY SWITCH;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Vicor
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
M23053/16-004-0
Sumitomo Electric Industries
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Assembly Item Name: TAPER SLEEVE; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO;
M85049/88-19W03
TE Connectivity
CONNECTOR ACCESSORY; Shell Sizes: 19; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Material: ALUMINUM ALLOY; Maximum Operating Temperature: 175 Cel;
M83513/05-07
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: M83513/05-07; DIN Conformity: NO; MIL Conformity: YES; IEC Conformity: NO; Assembly Item Name: JACKPOST KIT;
DF13-2630SCFA(04)
Hirose Electric
DF13-2630SCFA(04) by Hirose Electric is a UL approved connector with crimp terminals for 30-26 AWG wires. It has a rated current of 1A and contact resistance of 30 mohm, suitable for signal applications at temperatures ranging from -35 to 85 °C.
13697414
Delphi Connection Systems
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; MIL Conformity: NO; DIN Conformity: NO; Material: COPPER ALLOY;
1-2308340-5
TE Connectivity 1-2308340-5 is an Assembly Product with shielding, operating from -40 to 90°C. Made of ZINC ALLOY, it supports wire sizes up to 0 AWG. Mounting options include SCREW and #4-40 UNC, ideal for various industrial applications.
13697408
Aptiv
Aptiv 13697408 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has 0.0551-0.0748 inch cable entry range. Ideal for applications requiring MALE contact gender in Assembly Products category.
0460-204-0490
TE Connectivity's 0460-204-0490 contact features crimp terminal type, machined contact design, and can handle wire gauge up to 6 AWG. With a rated current of 100A, it is ideal for applications requiring male gender contacts in straight mounting style with round pin/socket contact design.
1727040100
Molex
Molex 1727040100 BACKSHELL for FCT D-SUB features 0.118" to 0.335" cable entry, ZINC ALLOY material, and -35°C to 100°C operating temp. Mounting options include SCREW or 4-40 UNC. Ideal for securing cables in electronic assemblies.
1727040098
Molex 1727040098 BACKSHELL is a zinc alloy assembly product for FCT D-SUB usage. It supports cable entry from 0.118" to 0.335", with operating temperatures ranging from -35°C to 100°C. Mounting options include 4-40 UNC screws, making it versatile for various applications.
1SNK908310R0000
TE Connectivity's 1SNK908310R0000 is an Assembly Product with POLYAMIDE insulator. It operates b/w -55 to 110 °C, rated at 600V AC/DC and handles up to 57A current. Ideal for applications requiring secure wire connections up to 0 AWG size in various industries.
DT06-12SC-CE04
TE Connectivity's DT06-12SC-CE04 is a FEMALE connector with 13A rated current and 250V DC voltage. It has 0.053" to 0.12" cable entry, -55°C to 125°C operating temperature range. Ideal for POWER AND SIGNAL applications requiring reliable connections in harsh environments.
W4P
W4P by TE Connectivity is an assembly product for the DT SERIES, designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wire sizes up to 0 AWG. Made of polybutylene terephthalate, it is ideal for various industrial and automotive electrical connections.
12089188
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Maximum Cable Entry: .075 inch;
W3P-1939
TE Connectivity's W3P-1939 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125°C, it supports up to 0 AWG wire size. Made of POLYBUTYLENE TEREPHTHALATE, it's ideal for various applications requiring robust electrical connections.
0462-201-20141
TE Connectivity's 0462-201-20141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 20 AWG wires at 7.5 A current. Ideal for POWER applications requiring FEMALE ROUND PIN-SOCKET contacts.
39-00-0428
The Molex 39-00-0428 is a power contact assembly product with a crimp terminal type. It is designed for use with 5557, 30067, 44516 or 42474 housing and has a finish thickness of 30. This contact is made of brass and can accommodate wire sizes ranging from 24 AWG to 18 AWG.
45750-1112
45750-1112 by Molex is a crimp contact with copper alloy material. It supports wire sizes from 20 AWG to 18 AWG and has a finish thickness of 100. Ideal for applications with 5557, 30067, 43760, 44516, and 42474 series housings.
685030101
CONNECTOR ACCESSORY;
CC79L-2630-01-L
Samtec
Samtec CC79L-2630-01-L CONTACT features 10µ finish thickness, LOOSE design for 26-30 AWG wire. Made of PHOSPHOR BRONZE, ideal for Assembly Products applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
280232-8
TE Connectivity's 280232-8 is an Assembly Product with a temp range of -40 to 105°C. It supports wire gauge up to 14 AWG and has a cross-section area of 2.5 mm². Ideal for applications requiring straight mounting and female contact gender.
280232
TE Connectivity 280232 is a UL approved FASTON 6.3 MM SERIES RECEPTACLE CONTACT with -40 to 105 °C operating temp range. Featuring 2.5 mm2 cross section area, it accommodates wire sizes from 18 to 14 AWG for FEMALE contacts in STRAIGHT mounting style. Ideal for HOUSING ITEM assembly applications.
280233
TE Connectivity's 280233 is a UL-approved housing with a temperature range of -40 to 105°C. It accommodates wire sizes from 18 to 14 AWG and has a cross-section area of 2.5 mm². This female connector, made of nylon, is commonly used in assembly products for straight mounting applications.
280232-1
Assembly Items; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; Wire Gauge (AWG): 14; Minimum Wire Size: 18 AWG; Maximum Operating Temperature: 105 Cel;
280232-5
Assembly Items; Contact Gender: FEMALE; Cross Section Area: 2.5 mm2; Wire Gauge (AWG): 14; Maximum Operating Temperature: 105 Cel; Maximum Wire Size: 14 AWG;
2802329
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Approvals (V): CUL; EAC; UL; Insulator Material: POLYAMIDE; Maximum Operating Temperature: 105 Cel; IEC Conformity: NO; MIL Conformity: NO;
2802552
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 105 Cel; Approvals (V): EAC; UL; IEC Conformity: NO; Minimum Operating Temperature: -60 Cel; Assembly Item Name: COMPONENT PLUG;
2802345
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Insulator Material: POLYAMIDE; IEC Conformity: NO; Assembly Item Name: COMPONENT PLUG;
2802387
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYAMIDE; Assembly Item Name: COMPONENT PLUG; DIN Conformity: NO; Approvals (V): EAC; UL; Maximum Operating Temperature: 105 Cel;
2802549
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -60 Cel; DIN Conformity: NO; Maximum Operating Temperature: 105 Cel; Assembly Item Name: COMPONENT PLUG; IEC Conformity: NO;
2802565
TERMINAL BLOCK ACCESSORY; Assembly Item Name: JUMPER; MIL Conformity: NO; Maximum Operating Temperature: 105 Cel; Insulator Material: POLYAMIDE; Approvals (V): EAC; UL;
2802578
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -60 Cel; IEC Conformity: NO; Maximum Operating Temperature: 105 Cel; Assembly Item Name: JUMPER; Approvals (V): UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved