Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY; Assembly Item Name: JUMPER; MIL Conformity: NO; Maximum Operating Temperature: 105 Cel; Insulator Material: POLYAMIDE; Approvals (V): EAC; UL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Dynamic Solutions
ACDS - Activité Composants Distribution Service
Native Components
$0.575
Northwest PG Solutions
$0.632
AZTECH Wire
$16.630
Assembly Products 2802565 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Approvals (V):
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
Insulator Material:
MIL Conformity:
Maximum Operating Temperature:
Minimum Operating Temperature:
2802565 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Yageo
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Daco Semiconductor
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
BAV99
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
5-66506-9
Tyco Electronics Amp
5-66506-9 by Tyco Electronics Amp is a CRIMP terminal with 0.05" min cable entry, suitable for 24-20 AWG wires. Its ROUND PIN-SOCKET contact design and MALE gender make it ideal for straight mounting applications in assembly products.
0460-202-1631
TE Connectivity
TE Connectivity's 0460-202-1631 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 150 °C, suitable for wire gauges 16-20 AWG. With a rated current of 13 A, it is commonly used in male contact applications requiring a straight mounting style and round pin-socket contact design.
09300160301
Harting Electronics & Kg
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: HOUSING; IEC Conformity: NO; DIN Conformity: NO;
1766195-1
TE Connectivity's 1766195-1 is a CRIMP terminal with copper alloy material, suitable for POWER applications. With a finish thickness of 200 µm, it supports wire gauge from 14 to 12 AWG and can handle up to 35 A current. Ideal for male contact gender in straight mounting style, operating b/w -55°C to 105°C.
160404-2
TE Connectivity's 160404-2 is a MALE contact with STRANDED construction, suitable for DISCRETE WIRE cables. With POLYAMIDE insulator and material, it supports wire sizes from 12 to 10 AWG and operates up to 105°C. Ideal for applications requiring a 0.15-0.25 inch cable entry.
M23053/5-106-9
Insultab
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; IEC Conformity: NO; MIL Conformity: NO; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE;
SZPD-002T-P0.3
J S T Mfg
CONNECTOR ACCESSORY; Manufacturer Series: ZPD;
776363-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel;
7-745129-9
CONNECTOR ACCESSORY; Shielding: YES; Maximum Wire Size: 0 AWG; Assembly Item Name: FERRULE-STEPPED; Material: BRASS; Wire Gauge (AWG): 0;
66506-3
TE Connectivity 66506-3 is a male signal contact with crimp terminal type. It has a wire gauge of 20 AWG, rated for 2A current, and made of brass material. Ideal for use in AMPLIMITE HDP-20 and CPC connectors with operating temperatures ranging from -55 to 105 °C.
DTM06-3S-C017
TE Connectivity's DTM06-3S-C017 is a FEMALE connector with 7.5A rated current and 250V DC voltage. It has a 0.053" to 0.12" cable entry range, ideal for POWER AND SIGNAL applications. With an operating temperature range of -55°C to 125°C, it ensures reliable performance in various environments.
0462-209-16141
TE Connectivity's 0462-209-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 14 AWG wire and rated at 13A. Ideal for POWER applications requiring FEMALE contacts in STRAIGHT mounting style.
828986-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
M23053/5-111-9
Dunbar Products
ASSEMBLY ITEMS; Construction: SINGLE WALL; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;
W2P
TE Connectivity's W2P is an Assembly Product for DT SERIES, with a max operating temp of 125°C and min of -55°C. It features POWER AND SIGNAL design, POLYBUTYLENE TEREPHTHALATE material, and supports up to 0 AWG wire size. Ideal for applications requiring high temperature resistance and robust electrical connections.
5206514-1
TE Connectivity's 5206514-1 LOCKING POST KIT features a Finish Thickness of 400, Max Wire Size of 0 AWG, and Material made of STEEL. Ideal for applications requiring secure assembly with Mounting Options: #4-40 SCREW.
39-00-0073
Molex
Molex 39-00-0073 is a POWER CONTACT with FEMALE gender, SQUARE PIN-SOCKET style. Made of BRASS material, it has a 0.169" terminal length and supports wire sizes from 24 AWG to 18 AWG. Ideal for use with 5557, 30067, 44516 or 42474 HOUSING assemblies.
43030-0008
Molex 43030-0008 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Ideal for use with 43025/43645/44133 assemblies, it has a 0.138" terminal length and 0.073" cable entry.
33012-3003
Molex 33012-3003 is a female contact for MX150 connector with crimp terminal type. It has a rated current of 10A, contact resistance of 8mohm, and can handle wire sizes up to 22 AWG. Ideal for applications requiring straight mounting style and operating temperatures ranging from -40°C to 105°C.
SPAL-001T-P0.5
SPAL-001T-P0.5 by J S T Mfg is a UL approved PAL connector with crimp terminal type, suitable for 26-22 AWG wires. It has a rated current of 3A and contact resistance of 25 mohm. Ideal for applications requiring male contact gender in straight mounting style at temperatures ranging from -25 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
280232-8
TE Connectivity's 280232-8 is an Assembly Product with a temp range of -40 to 105°C. It supports wire gauge up to 14 AWG and has a cross-section area of 2.5 mm². Ideal for applications requiring straight mounting and female contact gender.
280232
TE Connectivity 280232 is a UL approved FASTON 6.3 MM SERIES RECEPTACLE CONTACT with -40 to 105 °C operating temp range. Featuring 2.5 mm2 cross section area, it accommodates wire sizes from 18 to 14 AWG for FEMALE contacts in STRAIGHT mounting style. Ideal for HOUSING ITEM assembly applications.
280233
TE Connectivity's 280233 is a UL-approved housing with a temperature range of -40 to 105°C. It accommodates wire sizes from 18 to 14 AWG and has a cross-section area of 2.5 mm². This female connector, made of nylon, is commonly used in assembly products for straight mounting applications.
280232-1
Assembly Items; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; Wire Gauge (AWG): 14; Minimum Wire Size: 18 AWG; Maximum Operating Temperature: 105 Cel;
280232-5
Assembly Items; Contact Gender: FEMALE; Cross Section Area: 2.5 mm2; Wire Gauge (AWG): 14; Maximum Operating Temperature: 105 Cel; Maximum Wire Size: 14 AWG;
2802329
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Approvals (V): CUL; EAC; UL; Insulator Material: POLYAMIDE; Maximum Operating Temperature: 105 Cel; IEC Conformity: NO; MIL Conformity: NO;
2802552
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 105 Cel; Approvals (V): EAC; UL; IEC Conformity: NO; Minimum Operating Temperature: -60 Cel; Assembly Item Name: COMPONENT PLUG;
2802374
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Minimum Operating Temperature: -60 Cel; Approvals (V): EAC; UL; Insulator Material: POLYAMIDE; MIL Conformity: NO;
2802345
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Insulator Material: POLYAMIDE; IEC Conformity: NO; Assembly Item Name: COMPONENT PLUG;
2802387
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYAMIDE; Assembly Item Name: COMPONENT PLUG; DIN Conformity: NO; Approvals (V): EAC; UL; Maximum Operating Temperature: 105 Cel;
2802549
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -60 Cel; DIN Conformity: NO; Maximum Operating Temperature: 105 Cel; Assembly Item Name: COMPONENT PLUG; IEC Conformity: NO;
2802578
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -60 Cel; IEC Conformity: NO; Maximum Operating Temperature: 105 Cel; Assembly Item Name: JUMPER; Approvals (V): UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved